Rapid-Case 2.5"

The enclosures in the Rapid-Case Series for 2.5" hard drives are perfect for users in need of a well manufactured and inexpensive hard drive enclosure for everyday use.

The 2.5" cases offer internal connections for IDE hard drives. The cases connect to PCs or laptops via an external USB connection.

Installing a hard drive in the enclosure is a simple process requiring only a few minutes time.

General:
Type: Mobile (2.5")
External Interface: USB 2.0 (Mini-B Port)
Internal Interface: IDE
Power Supply: USB
Max. Data Transfer Rate USB: 480 Mbit/s
Status LED: Power and HDD Access
Cable: USB 2.0 (Type A Plug to Mini-B Plug)
USB Cable Length: 97 cm
Weight: 80 g
Dimensions (L x W x H): 125 x 78 x 11 mm
Compatibility:
Max. Height 2.5" HDD: 9.5 mm
Max. HDD Capacity: 2 TB
Plug and Play:
Supported Operating Systems: Windows 7/8/10

Package Contents:
Rapid-Case 2.5"
USB Cable
Set of Mounting Screws
Screwdriver
Transport Bag
Manual
EAN Code:
4044951008056

Datasheets
FAQs

  • My hard drive does not appear in My Computer.
    If the hard drive is new, it should be partitioned and formatted in Windows Disk Management, then is should appear in My Computer/Explorer.
  • My USB hard drive is not detected in Device Manager.
    Check to ensure there is enough power coming from your USB port. Normally, 500 mA for USB 2.0 and 900 mA for USB 3.0 is sufficient. If your hard drive requires more power, a Y-adapter with an external power supply or a second USB port must be used.
  • Does the case have sleep mode?
    It is recommended that our case goes into sleep mode after 30 minutes. Unfortunately this is not feasible for all chipsets.
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below



* required fields