The QuickPort XT Duo Clone is a docking station with USB 3.0 for convenient connection of up to two SATA hard drives to a PC. Two universal docking slots are provided for either a 2.5" or a 3.5" hard drive. The internal SATA interface of the QuickPort supports Revision 3.0 and is backward compatible with older versions. External connection is made via the provided USB 3.0 cable. A power adapter is also included.
Copying was never this easy: With the practical Clone button on the back of the docking station, all data from a hard drive can be copied directly to an empty hard drive. The QuickPort XT Duo Clone can do this independently; it does not even need to be connected to a PC.
|External Interface:||USB 3.0 (Type B Port)|
|Internal Interface SATA:||2.5", 3.5"|
|Max. Data Transfer Rate USB:||5 Gbit/s|
|Sleep Mode:||After 30 Minutes|
|Cable:||USB 3.0 (Type A Plug to Type B Plug)|
|USB Cable Length:||100 cm|
|Power Supply:||External Power Supply|
|Dimensions (L x W x H):||113 x 103 x 55 mm|
|SATA Compatibility:||Revision 1.0, 2.0, 3.0|
|Plug and Play:||✓|
|Supported Operating Systems:||Windows 7/8/10|
|SATA QuickPort XT Duo Clone|
|External Power Supply|
My hard drive does not appear in My Computer.If the hard drive is new, it should be partitioned and formatted in Windows Disk Management, then it should appear in My Computer.
My hard drive is sporadically ejected from Windows or the data transfer stops.Ensure that your USB or eSATA uses the latest firmware and driver. If the problem is not resolved, please downlowd the latest firmware for the docking station from the Sharkoon homepage.
Can the QuickPort Clone also clone operating systems?Yes, it is possible. The Master Boot Record will also transfer
> This link will take you to our support form.