Caution! If you think you know everything about cooling fans, get ready to be surprised! This fan is different, very different. It’s a triple attack approach to a silent and cooler system.
First: Wind Noise? Not Here!
The special 3D curved design with striped air guides steers the airflow straight through the fan blades, thus preventing air turbulence - the main cause of wind noise. Even after many hours of use, the fan remains silent due to the end of the guides having special ‘shark’ teeth to reduce both drag and dust build-up. This shark can bite, so chose one of the several different brightly colored air guides to confirm that it’s running (since you won’t hear it…) in order to protect your fingers while working inside your computer.
The SHARK Blades are equipped with a fluid bearing for long life and ultra-smooth operation. Fluid bearings are used in many high-performance hard disk designs and are popular for their smooth operation and long lifespan. The fan blades are precision balanced to avoid vibrations.
With its 120 mm diameter, optimized airflow and powerful, yet silent motor, there is plenty of cool air available for your system. The SHARK Blades are powered directly from the power supply, using the included adapter plug or a 3-pin socket for a temperature controlled run.
|Fan Speed:||1,000 rpm|
|Bearing Type:||Fluid Dynamic Bearing|
|Max. Airflow:||56 m³/h|
|Max. Air Pressure:||2.63 mm-H²0|
|Noise Level:||19 dB(A)|
|MTBF:||Min. 50,000 Hours|
|Color Versions:||Blue, green, red or yellow|
|Weight incl. Fixed Cable:||120 g|
|Dimensions (L x W x H):||120 x 120 x 25 mm|
|Cable and Connectors:|
|Cable Length:||50 cm|
|Rated Voltage:||12 V|
|Rated Current:||0.15 A|
|Rated Power:||1.2 W|
|Start Voltage:||7 V|
|3-Pin to 4-Pin Power Supply Adapter|
|Set with Rubber Bolts|
|Set with Fan Screws|
The fan does not rotate.If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
Can I connected the fan to a mainboard with a 4-pin Molex connector?Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
The fan does not reach the specified rotational speed.If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
> This link will take you to our support form.