Silent Eagle LED

The "LED Edition blue" of our Silent Eagle provides a fully transparent housing (fan blades and frame) with four blue LEDs for those who wish to add some atmosphere to their system, while having the benefit of an ultra low noise fan. Besides the illumination, the Silent Eagle LED Edition blue features all the specifics of the standard Silent Eagle fans.


General:
Fan Speed: 1,000 rpm
Bearing Type: Sleeve Bearing
Max. Airflow: 64.8 m³/h
Max. Air Pressure: 0.9 mm-H²0
Noise Level: 21 dB(A)
Illumination:
Dimensions (L x W x H): 120 x 120 x 25 mm
Cable and Connectors:
Connector: 3-Pin Connector
Cable Length: 30 cm
Electrical Specifications:
Rated Voltage: 12 V
Rated Current: 0.25 A
Rated Power: 3 W
Start Voltage: 7 V

Package Contents:
Silent Eagle 1000 LED 120 mm
3-Pin to 4-Pin Power Supply Adapter
Set with Rubber Bolts
Set with Fan Screws
EAN Code:
4044951006113

General:
Fan Speed: 2,000 rpm
Bearing Type: Sleeve Bearing
Max. Airflow: 38.5 m³/h
Max. Air Pressure: 1.86 mm-H²0
Noise Level: 17.8 dB(A)
Illumination:
Dimensions (L x W x H): 80 x 80 x 25 mm
Cable and Connectors:
Connector: 3-Pin Connector
Cable Length: 30 cm
Electrical Specifications:
Rated Voltage: 12 V
Rated Current: 0.12 A
Rated Power: 1.44 W
Start Voltage: 7 V

Package Contents:
Silent Eagle 2000 LED 80 mm
3-Pin to 4-Pin Power Supply Adapter
Set with Rubber Bolts
Set with Fan Screws
EAN Code:
4044951005703

Datasheets
Manuals
FAQs

  • The fan does not rotate.
    If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
  • Can I connected the fan to a mainboard with a 4-pin Molex connector?
    Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
  • The fan does not reach the specified rotational speed.
    If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below



* required fields