Full Control for Fans and Illumination
With the PACELIGHT P1 RGB LED Controller, RGB LED fans and strips can be illuminated with up to 16.8 million colors. The practical circuit board is coupled to the power supply via a SATA power connection, and to the mainboard via an internal 9 pin USB connector. The installation in the PC case can be done with cable ties or by using the adhesive surface of the protective silicon base. Once installed, up to eight LED components with 12V G-R-B connectors and up to four fans with 3-pin mainboard connectors can be plugged into the circuit board and controlled through the intuitive software. Two specially developed PACELIGHT F1 RGB LED fans and two PACELIGHT S1 RGB LED strips are all supplied with the PACELIGHT P1.

High Performing, Intuitive Software
The PACELIGHT software provides separate color and effect control for each of the up to eight connected LED components. Apart from a choice of three different lighting modes, there are also synchronizable effects with adjustable speeds. In addition, the illumination of the LED components can be set according to various criteria: Individual settings according to the day of the week; linking illumination settings to active programs; and dimming the LEDs according to the time of day. Furthermore, the PACELIGHT P1 provides the possibility of testing connected fans for compatibility, and the speeds of compatible fans can then be regulated. An illumination setting can also be chosen which can be used to signal a fan failure should this occur.

EAN: 4044951020201

Pacelight P1
General
RGB Channels:
8
Fan Channels:
4
Input Voltage:
12 V DC
Connector:
15-Pin SATA
USB-Connector:
9-Pin internal
Max. LED Current:
50 mA (per color)
Max. Fan Current:
0,5 A (per Connector)
Fan Output Voltage:
12 V
Max. Fan Starting Current:
2 A
Microcontroller:
4x 8bit MCU
Fan Controller Type:
PWM
LED Controller Type:
PWM
Supported Operating Systems:
Windows 7/8/10
Fixation:
Self-Adhesive / Cable Tie
Weight:
44 g
Cable Length:
60 cm
Dimensions (L x W x H):
110 x 66 x 11 mm
Pacelight RGB LED Strip S1
General
LED Type:
5050 RGB
Length:
360 mm
Width:
10 mm
No. of LEDs:
18
Connector:
4-pin (2.54 mm)
Pinout:
12 V – G-R-B
Cable Length:
60 cm
Fixation:
Magnetic / Self-adhesive
Rated Voltage:
12 V DC
Rated Current:
280 mA
Weight:
30 g
Dimensions (L x W x H):
360 x 10 x 3 mm
Pacelight RGB Fan F1
General
Fan Speed:
1400 rpm ± 10 %
Bearing Type:
Fluid Dynamic Bearing
Max. Airflow:
93.22 m³/h
Max. Air Pressure:
1.13 mm H²0
Noise Level:
23 db (A)
MTBF:
Min. 50,000 Hours
Illumination:
6x RGB LED
Weight incl. Fixed Cable:
125 g
Dimensions (L x W x H):
120 x 120 x 26 mm
Cable and Connectors
Connector Fan:
3-Pin Connector
Connector LED:
4-Pin Connector (2.54 mm)
Pinout:
12 V – G-R-B
Cable Length LED:
50 + 5 cm
Cable Length Fan:
45 cm
Electrical Specifications
Rated Voltage:
12 V
Rated Current Fan:
0.15 A
Rated Current LED Fan:
0.08 A
Rated Power Fan:
1.8 W
Rated Power LED Fan:
1 W
Start Voltage:
5 V
Pacelight RGB Illumination Set
Package Contents
Pacelight RGB Controller P1
2 x Pacelight RGB Strip S1
2 x Pacelight RGB Fan F1
Manual
EAN Code
4044951020201
Datasheets
Software
Certifications