Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the C60, Sharkoon is launching a new Rebel series PC case that, this time, aims to provide a particularly elegant presentation of the built-in hardware thanks to a tempered-glass front panel as well as a tempered-glass side panel.

Smart Airflow

So that the hardware is not only optimally showcased but can also be fully utilized, Sharkoon relies on an airflow in which fresh air is drawn in through the bottom of the case while heated air is transported out through the rear panel and the perforated side panel. To achieve this, the Rebel C60 RGB is already supplied with four 120-millimeter fans in the corresponding locations. A particular eye-catcher among these addressable RGB fans is the bottom panel fan, which has been installed at an angle. To prevent dust and dirt being transported from underneath the case into its inside, the entire bottom panel is protected with a detachable dust filter.

Modular Expansion of the Airflow

If desired, the airflow of the Rebel C60 RGB can be further optimized. Thus, an additional 120-millimeter fan can be installed behind the mainboard tray and three more can be placed under the top panel. Instead of fans, the top panel also offers space for a radiator of up to 360 millimeters, and in addition to this, the two pre-installed fans next to the mainboard tray can be replaced with a radiator measuring 240 millimeters. As a usual feature of the Rebel series cases, the easy installation of fans and any HDDS or SSDs is provided by a mounting frame and a mounting bracket, which can be removed from the case, equipped with the hardware, and then reinserted.

Spacious Showcase

With the use of the mounting bracket, up to three 3.5-inch HDDs or up to three 2.5-inch SSDs can be installed behind the mainboard tray in just a few steps. According to the manufacturer, the Rebel C60 RGB also offers enough space for a graphics card with a maximum length of 40 centimeters, a CPU cooler with a maximum height of 16.5 centimeters and a power supply unit with a maximum length of 27 centimeters.

Made for Modern Connectivity

When it comes to connections, the Rebel C60 RGB has two USB 3.0 interfaces on the top of the case, and for mobile devices and modern headsets, there is also a USB-C connection and a TRRS port.

Optimal Graphics Card Support

Like the Rebel C50, the Rebel C60 RGB is supplied with a graphics card holder complete with a rubberized contact surface. Those who prefer to mount the graphics card vertically in the case can use the optionally available installation set, which was already introduced along with the Rebel C50: the Rebel C Series Vertical Graphics Card Kit 4.0.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, is now widening its popular SKILLER SGK50 keyboard series with the launch of three new models that have a 75 percent layout. Apart from a standard version, the SKILLER SGK50 S3 is also available as a barebone version that is completely without switches and keycaps. These variants are available in either black or white, and there is also a visually striking version available with white PBT keycaps and blue highlights.

Fully Customizable

Following on from the SKILLER SGK50 S4, the SKILLER SGK50 S3 is a further model that widens the range of an already popular keyboard series with hot-swap capability for 3-pin or 5-pin switches. However, in contrast to the S4, this new model possesses a larger layout with dedicated arrow and function keys. There is also an additional Sharkoon key that allows the quick programming of up to two macros and the adjustment of the illumination — all without the need of separate software. For users who wish to get even more out the keyboard and have the ability to modify every aspect of its functionality, the SKILLER SGK50 S3 offers full compatibility with the open-source software QMK and VIA.

Best Possible Choice for Switches

As with the previous model, the SKILLER SGK50 S3 comes with a choice of pre-installed switches, and this time, the switches from the Gateron brand are used. Apart from the quickly responsive red switches or the crisp yellow ones, the tactile brown switches are also an option for the standard versions of the model. Meanwhile, the SKILLER SGK50 S3 PBT version comes with the third and latest variant of the immersive G Pro Yellow. For those who have an even broader range of ideas when it comes to switches, the SKILLER SGK50 S3 Barebone should be the most suitable version to choose. This keyboard comes without switches and keycaps and includes positioning plates for both ISO and ANSI layouts.

Satisfying Typing Sensation

As well as hot-swappable switches, the SKILLER SGK50 S3 should be able to provide the best possible typing feeling thanks to its positioning plate made of polycarbonate, the double-layer silicone damping and the factory-lubed stabilizers. Those who demand the maximum from their keyboard can reach for the SKILLER SGK50 S3 PBT. In accordance with its name, this version is supplied with grease-resistant PBT keycaps that have a legend produced via dye sublimation for extra durability.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. Sharkoon is again widening its range of keyboards and introducing a new mechanical gaming keyboard, this time with a full three-block layout within a tidy, elemental design. The SKILLER SGK20 presents itself with a rimless look and a practical cable channel in its underside, while the RGB illumination can be fully customized through the downloadable software. Two versions of the keyboard are available with either red or brown switches from Huano.

Trim and Tidy

Unlike the last keyboards that Sharkoon launched onto market, the SKILLER SGK20 has a full 3-block layout with 105 keys. The keyboard has, however, an extra slim design and an almost rimless look and should therefore be able to blend into any kind of setup. The trim appearance is complemented by a cable channel in the underside of the keyboard, which allows an orderly and interference-free positioning of the textile-braided cable.

Two Versions with Red or Brown Switches.

Technically, the SKILLER SGK20 should score points thanks to its polling rate of 1,000 Hertz together with the mechanical switches from Huano. For frequent gamers, the red switches should be particularly suitable due to their linear properties for resistance-free use without clicking noises. Frequent typists and occasional gamers, on the other hand, can choose the version that is equipped with the tactile brown switches, which have a perceptible actuation point. According to the manufacturer, the operating life cycle of both kinds of switch is 20 million keystrokes.

Extensive RGB illumination and Software

The SKILLER SGK20's full range of functions are available via the downloadable gaming software. With this, the keyboard's RGB illumination can be personalized according to color, intensity, or brightness, or by choosing one if the 18 pre-programmed lighting effects. The chosen customization can then be saved in different lighting profiles. The personal settings of all the other options that can be found in the gaming software, including recorded macros, can be bundled into one of up to 20 game profiles. With just a few clicks, a profile can then be selected to suit the game, genre or work application.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals, and in response to numerous customer requests, the manufacturer is now launching a white version of its REV300 Midi-ATX case. With the REV300 White, hardware builds take the proven approach of being installed around a 90-degree rotated mainboard, while the tempered-glass side panel is unconventionally placed on the right side of the PC case. In addition, the REV300 White comes with seven pre-installed PWM RGB fans.

Pre-Installed Maximal Airflow

Like its black counterpart, the white version of the REV300 comes readily equipped with the maximum possible number of fans: Apart from three addressable 140-millimeter RGB LED fans behind the front panel, there are also three equally addressable 120-millimeter RGB LED fans on the rear panel and another one under the top panel. To further maximize airflow, the front panel of the case consists of an air-permeable mesh. If water cooling is preferred instead of air cooling, an up to 360-millimeter radiator can be installed in the back of the case. There is also space for a radiator of up to 420 millimeters in the case's front — provided that the radiator does not exceed a height of 3.2 centimeters, a length of 46.5 centimeters, and a width of 14.1 centimeters.

Unusual but Proven Installation

All PC cases of the Sharkoon REV series are known for their unconventional configuration when it comes to installing the hardware build. The REV300 White is, of course, no exception here: The hardware components are installed around a mainboard that is rotated by 90 degrees with a result that is intended to provide a particularly stylish presentation through the tempered-glass side panel. And to open even more new possibilities in presenting the hardware, the glass side panel itself also breaks with convention and is to be found on the right side of the case, instead, as usual, on the left.

For Modern Components

Like the black version, the REV300 White should be an ideal case for large and modern components: Graphics cards with a length of up to 34.5 centimeters can be easily installed, as can CPU coolers up to 17.7 centimeters and power supply units with a maximum length of 27 centimeters. Near the front panel, on top of the case, a modern USB Type-C port ensures fast data transfer to mobile devices, while for everything else, the usual audio ports and four USB Type-A ports are also available.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. Sharkoon has now supplemented its hot-swap capable keyboard, the SKILLER SGK50 S4, with a fully customizable model that comes without keycaps and switches. Like the original SKILLER SGK50 S4, this Barebone model will also be available as a version in black or white, and there are versions that are designed for either ANSI or ISO keyboard layouts.

Customizable for Personal Tastes and Needs

As the name suggests, the SKILLER SGK50 S4 Barebone is a keyboard that is stripped down to the essentials, with no switches or keycaps. The keyboard's circuit board is hot-swappable and compatible with both 3-pin and 5-pin switches to make the right choice possible for any user requirement or taste. The user can also swap out the keycaps at any time and freely choose the shape and material from amongst all the keycaps which are available on the market. The suitable tools for replacing the switches and keycaps are already supplied with the keyboard.

Available with ISO and ANSI Compatibility

The manufacturer has also put importance on having a broad range of compatibility when it comes to the choice of possible keyboard layouts. The SKILLER SGK50 S4 Barebone is, therefore, not only configured for the widely used ANSI layouts, but there is also a version available for ISO layouts, enabling the use of layouts that are found in most European and South American countries.

Stylish Appearance

Like the original model, the Barebone model has a size which is 60 percent of a normal three-block keyboard. These compact dimensions not only provide for more freedom of movement on the tabletop, but the keyboard itself should make an attractive appearance in any setup. Here, the keyboard aims to score points with its chic spiral cable, which is a typical feature of the SKILLER SGK50 series, and with its easy-to-program RGB illumination that offers various lighting effects.

Easy Macro Recording

Like the original model of the SKILLER SGK50 S4, the Barebone versions also do without software. Two macros, each with up to 16 actions, can be easily set up on the keyboard using just a few key combinations. The macros can be overwritten whenever necessary.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. Sharkoon is now widening its range of PC cases with the launch of two ATX midi towers that, thanks to their distinctly minimalistic look, are designed for any kind of setting or use. Both the VS8 and VS9 are available either as an office-ready version without illumination or as a gaming-focused version with a tempered-glass side panel and addressable RGB LED fans. The RGB versions are also available with a white finish.

Minimalist Cases for All Purposes

The front panels of the office-ready VS8 and VS9 standard versions are deliberately styled with a minimalist look so that the cases can easily blend into formal office environments, domestic study rooms, or home offices. To remove the heated air, a 120-millimeter fan is already pre-installed on the rear panel of these windowless cases. Depending on the application and the required performance, three additional 120-millimeter fans can be installed behind the front of the case. If even more cooling capacity is required, there is space for two more 120-millimeter or two 140-millimeter fans under the top panel of the case.

RGB Versions for Gamers

Specially for gamers, both the VS8 and VS9 are available as an RGB version, which is also available with a white finish for more brightly presented setups. Due to the low-key design of the front panels together with a large side panel made of tempered glass, the focus of these models is entirely on the built-in hardware inside the case. For more demanding, performance-hungry applications, two 120-millimeter fans are already pre-installed behind the front panel. On the rear panel, these are supplemented by another 120-millimeter fan, which, in addition, is equipped with addressable RGB LEDs. Thanks to the included RGB controller, this pre-installed RGB LED fan and, if desired, another LED component can both be illuminated either via the mainboard software, or, alternatively, with 14 pre-set lighting effects via an integrated manual control. If required, there is also space for another 120-millimeter fan behind the front panel, as well as two further 120-millimeter or two 140-millimeter fans under the top panel. Alternatively, all versions of the two cases are also designed for the simultaneous operation of two radiators, with a 360-millimeter radiator in the front of the case and a 280-millimeter radiator in the top of the case.

Spaciously Designed for Any Hardware Build

Despite the compact dimensions of 42.3 x 20.5 x 48.5 centimeters, larger hardware components will also fit into the VS8 and VS9 cases. In all versions, the length of the graphics card can be 35 centimeters, while the CPU cooler can have a height of 15.8 centimeters, and the power supply unit can have a length of 21 centimeters. All the installed hardware components are protected by three dust filters on the front, top and bottom of the case. The filters can be easily removed and cleaned, whenever required.

Modular Options for Connections and Data Storage

The VS8 and VS9 also offer same installation possibilities when it comes to data storage: For up to two 3.5-inch hard drives and four 2.5-inch SSDs there is a choice of installation locations, whether behind the mainboard tray, on the power supply tunnel, or on the integrated HDD/SSD cage. As far as connectivity is concerned, the standard, office-ready versions rely on two proven USB 3.0 ports as well as an older USB 2.0 port. In addition, there are, of course, the obligatory audio ports, and all the connections can be easily reached on the top of the case. Instead of a Type-A USB 2.0 port, the RGB versions offer a USB Type-C connection for the fast and easy transfer of mobile data.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. Sharkoon is now widening its range of PC cases with the launch of two ATX midi towers that, thanks to their distinctly minimalistic look, are designed for any kind of setting or use. Both the VS8 and VS9 are available either as an office-ready version without illumination or as a gaming-focused version with a tempered-glass side panel and addressable RGB LED fans. The RGB versions are also available with a white finish.

Minimalist Cases for All Purposes

The front panels of the office-ready VS8 and VS9 standard versions are deliberately styled with a minimalist look so that the cases can easily blend into formal office environments, domestic study rooms, or home offices. To remove the heated air, a 120-millimeter fan is already pre-installed on the rear panel of these windowless cases. Depending on the application and the required performance, three additional 120-millimeter fans can be installed behind the front of the case. If even more cooling capacity is required, there is space for two more 120-millimeter or two 140-millimeter fans under the top panel of the case.

RGB Versions for Gamers

Specially for gamers, both the VS8 and VS9 are available as an RGB version, which is also available with a white finish for more brightly presented setups. Due to the low-key design of the front panels together with a large side panel made of tempered glass, the focus of these models is entirely on the built-in hardware inside the case. For more demanding, performance-hungry applications, two 120-millimeter fans are already pre-installed behind the front panel. On the rear panel, these are supplemented by another 120-millimeter fan, which, in addition, is equipped with addressable RGB LEDs. Thanks to the included RGB controller, this pre-installed RGB LED fan and, if desired, another LED component can both be illuminated either via the mainboard software, or, alternatively, with 14 pre-set lighting effects via an integrated manual control. If required, there is also space for another 120-millimeter fan behind the front panel, as well as two further 120-millimeter or two 140-millimeter fans under the top panel. Alternatively, all versions of the two cases are also designed for the simultaneous operation of two radiators, with a 360-millimeter radiator in the front of the case and a 280-millimeter radiator in the top of the case.

Spaciously Designed for Any Hardware Build

Despite the compact dimensions of 42.3 x 20.5 x 48.5 centimeters, larger hardware components will also fit into the VS8 and VS9 cases. In all versions, the length of the graphics card can be 35 centimeters, while the CPU cooler can have a height of 15.8 centimeters, and the power supply unit can have a length of 21 centimeters. All the installed hardware components are protected by three dust filters on the front, top and bottom of the case. The filters can be easily removed and cleaned, whenever required.

Modular Options for Connections and Data Storage

The VS8 and VS9 also offer same installation possibilities when it comes to data storage: For up to two 3.5-inch hard drives and four 2.5-inch SSDs there is a choice of installation locations, whether behind the mainboard tray, on the power supply tunnel, or on the integrated HDD/SSD cage. As far as connectivity is concerned, the standard, office-ready versions rely on two proven USB 3.0 ports as well as an older USB 2.0 port. In addition, there are, of course, the obligatory audio ports, and all the connections can be easily reached on the top of the case. Instead of a Type-A USB 2.0 port, the RGB versions offer a USB Type-C connection for the fast and easy transfer of mobile data.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. Sharkoon is now widening its product range with a fully modular 80 PLUS Gold certified power supply unit that, along with a PCIe Gen5 12VHPWR connection, offers full compatibility with the ATX 3.0 standard. The Rebel P30 Gold is available in three models, each with a black housing and a maximum power of either 850 watts, 1,000 watts or 1,300 watts. Another model is available with a white housing and a maximum power of 1,000 watts.

Modern Connections for High-End Graphics Cards

Regardless of their wattage, all versions of the Rebel P30 Gold have a modern PCIe Gen5 12VHPWR connection, which is required for the operation of current high-end graphics cards. The PSUs of this series all come with modular cable sets, allowing the cables to be used as and when they are needed. A total of twelve SATA connections are available, while the cable sets of the 850- and 1,000-watt models each offer up to four 6+2-pin PCIe connections — the 1,300-watt model even offers up to eight. Two IDE connections and a floppy connection are also available using the included adapters.

All Protections Included

Apart from the 80 PLUS Gold certification, and for reliable safety, the Rebel P30 power supply units are all equipped with over-current protection, over- and under-voltage protection, short-circuit protection, over-temperature protection, and over-power protection. For further reliability, the manufacturer has equipped the Rebel P30 Gold with all-Japanese capacitors as well as DC/DC and patented LLC resonant-converter technologies.

Additional Functions for Cool Operation

To dissipate heated air and provide a quiet operation, the PSUs use a 135-millimeter fan with a fluid dynamic bearing. For even quieter running, the fan rotation can be deactivated during moderate power loads using the Zero RPM mode. A switch allows this mode to be switched on or off as desired. The fan mode keeps the fan running for up to 60 seconds after the PC system has been shut down in order to further enhance the cooling process of the hardware.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals and, for the first time, is now launching two chairs — the OfficePal C30 and the OfficePal C30M — that are specially made for comfortable and productive work, whether in the office or at home. For this, the chair design offers a mesh construction and a variety of ergonomic adjustment options.

Special Comfort Thanks to Mesh Design

The OfficePal C30 office chair in classic black features a breathable mesh backrest as well as a traditional, padded seat base. This combination should provide for pleasantly comfortable working, no matter what the office environment or the time of the year. The OfficePal C30M, on the other hand, appears in subtle grey, and both the backrest and the seat base are covered with a stretched mesh. Through this full-mesh design, the pressure should be optimally distributed to ensure a particularly light and ergonomic sitting experience.

Varied and Ergonomically Adjustable

To fully support productivity, whether in the office or when working from home, both OfficePal C30 models can be adapted to the needs of the user via various adjustment options. In addition to the obligatory seat-height adjustment and an adjustable tilt angle, both chairs also offer a comfortable, five-height-adjustable backrest flexible 3D adjustable armrests. In addition, the chairs are equipped with an integrated lumbar support and a headrest that can be adjusted in height and angle for users who are up to 190 centimeters in height.

Easy Controls and More Freedom of Movement

A particularly easy-to-reach and easy-to-operate wireline control mechanism with two toggle levers provides the smooth adjustment of the seat height and the tilt function. The tilt function allows the chair to be inclined and locked at a desired tilt angle, and, when unlocked, it provides additional potential for movement during long periods of work.

Safe Sitting up to 120 Kilograms

The combination of a stable frame construction, smooth-running 60-millimeter wheels and a high-quality class-4 gas lift piston all offer safe sitting and a high load capacity of up to 120 kilograms.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. In response to a number of requests, Sharkoon is now complementing two of its all-in-one water-cooling systems, the S80 RGB and the S90 RGB, with versions in white. With either a 240-millimeter or a 360-millimeter radiator and a new look in white, they can now be perfectly integrated into brighter-colored PC builds.

Radiators with Daisy-Chained Fans

Just like the previously launched black versions, the white version of the S80 RGB has a 240-millimeter radiator, while the larger cooling solution, the S90 RGB, features a 360-millimeter radiator. Both model sizes have fans with addressable RGB illumination and PWM control to vary the speed from 600 to 2,000 revolutions per minute. The fans are connected in sequence — daisy chained — for easy cable management.

Chic and Efficient CPU Cooling

For the best possible heat dissipation, the water block and pump units of both models are equipped with a copper plate and are supplied with high-quality DOWSIL™ thermal paste. The water block and pump units also feature a diamond-cut look, a chic luminous infinity mirror effect and a logo that can be rotated, if necessary, for an optimal position.

Easy Installation and Use

The S80 RGB White and the S90 RGB White come with two mounting brackets that ensure compatibility with almost all CPUs from common manufacturers. Thanks to the flexible textile-braided tubing, the installation of these all-in-one water-cooling systems should prove to be as easy as possible.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the Rebel C50, Sharkoon introduces an ATX PC case that is designed for high-end hardware, featuring a spacious interior, modular installation options, and an all-round perforation for airflow. The case is functional in design and offers space for the largest of graphics cards as well as the simultaneous installation of two 360 mm radiators or a total of eleven 120-millimeter fans.

Functional Looks

The case makes a monochrome appearance in either black or white. The emphasis of the design is to be distinct by being functional: Both the front panel and the side panel are finely perforated almost across the entire surface to support the optimal cooling of the case interior.

Two Versions for Different Demands

One version, simply named the "Rebel C50", comes with two 120-millimeter PWM fans, one behind the front panel and one at the back of the case. Another version, the Rebel C50 RGB, comes — as its name suggests — with four pre-installed PWM fans that have addressable RGB lighting. To highlight the illuminated interior, the Rebel C50 RGB is also equipped with an elegant, screw-free side panel made of tempered glass and comes with a space-saving RGB controller for up to eight LED components.

Modular Options

Various elements of the Rebel C50 are modularly designed. It has a power supply tunnel, part of which can be removed to allow more space at the front of the case for fans and other components. In addition, up to four fans can be pre-assembled onto mounting brackets and then be inserted together under the top panel or attached behind the mainboard tray. Using one of the mounting brackets, even a 360-millimeter radiator can be inserted under the top panel. The other mounting bracket behind the mainboard tray can accommodate up to three HDDs or three SSDs. Next to the mainboard tray, there is also room for another 360-millimeter radiator. Altogether, three mounting options are available for radiators. On the other hand, for those who like it classic when it comes to cooling, it is also possible to install up to eleven 120-millimeter fans.

Optimal Graphics Card Support

In order to prevent large graphics cards from bending, the Rebel C50 already comes with a graphics card holder complete with a rubberized contact surface. Furthermore, there is the optionally available "Rebel C50 VGCK 4.0", which is an installation set for the vertical mounting of the graphics card. The set comes with a PCIe 4.0 riser cable and is especially ideal for the RGB version of the case.

Presentation at Computex 2023

If you would like to a get live close-up of the new Sharkoon case as well as many other new products, then there is the opportunity to do so: Once again, Sharkoon will be at Computex Taipei and will be present at the Nangang Exhibition Center in Hall 1, 4F, Booth Number L1201a, from 30 May to 2 June 2023.

In 2023, the PC-gaming manufacturer Sharkoon celebrates its 20-year anniversary. Since the founding of Sharkoon on 17 April 2003, the fast-paced PC and gaming industry has seen constant change, with countless trends that have come and gone. It was this flow of trends that inspired Sharkoon to always respond flexibly, with a constantly fresh range of products, in order to meet the prevailing needs for the growing scene of gaming and case modding. Thanks to this flair for innovation and its continual responsiveness to its customers, the manufacturer from the German region of Hesse is now present across the whole world. The 20-year success story began with a small glow in the PC cases of enthusiastic modding pioneers: an illuminated PC case cable that was soon to become the first commercial Sharkoon product known as the "Luminous IDE Round Cable".

In the following years, thousands of otherwise dull PC cases were being transformed into personalized, colorfully lit gaming computers thanks to illuminated cables and cold cathode fluorescent lamps, so-called CCFLs. This was a trend that has come back in recent years in the form of RGB illumination, which is now ever present within the Sharkoon product range.

In addition to illuminated case-modding accessories, Sharkoon also continuously developed its range and presented, for example, the "Luminous Keyboard", the first illuminated keyboard in Europe. Soon, new product developments followed in quick succession: Sharkoon presented the "Silvation", its first PC case; then it brought the popular "SilentEagle" fan series onto the market and impressed with innovations such as the PC "Jump Start", a convenient remote control with which the PC could be switched on easily. With the Dolby-certified X-Tatic headset series, Sharkoon was also able to make itself present within the gaming console market, and the company even made it to Hollywood in the movie "Noobz"! Over the years, Sharkoon has always remained true to its customer-oriented credo of combining high quality and super performance with a fair price.

To duly celebrate its 20th anniversary together with the gaming community, the manufacturer will launch several exciting campaigns on its social media channels over the course of the year. To begin with, Sharkoon has announced a new mouse mat that is limited to 2,023 pieces for the anniversary year 2023. The "20 Years Limited Edition Mouse Mat" will have a unique look in which a serial number is already included in the design. The ownership of this mouse mat gives entitlement to enter the company's big anniversary giveaway scheduled for 11th October - with lots of prizes.

Further details on the limited-edition mouse mat and anniversary promotions will be announced on the manufacturer's social media channels over the next few weeks.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the S70 RGB, S80 RGB and S90 RGB, Sharkoon is launching its first all-in-one CPU water-cooling solutions. The three models are equipped with high-performing addressable RGB PWM fans, a water block with a copper plate, and flexible, textile-braided tubing. The S70 RGB is the entry-level model, while the S80 RGB and S90 RGB are aimed at more demanding PC configurations.

High-Performance, Daisy-Chained RGB PWM Fans.

The S70 RGB and S80 RGB both have a 240-millimeter radiator, while the S90 RGB has a larger 360-millimeter radiator. All three water-cooling systems come with RGB PWM fans. The RGB illumination is provided by addressable LEDs, while the speed of the fans can be adjusted within a range of 600 to 2,000 revolutions per minute. For easy cable management, the fans are connected in sequence by being “daisy chained”.

Efficient Heat Dissipation

In order to dissipate heat as best as possible, the water block and pump unit of each model is equipped with a copper plate. The S80 RGB and S90 RGB models also come with high-quality DOWSIL™ thermal paste to make the cooling of the CPU even more efficient.

Rotatable Water Block and Pump Unit

The water block of the S80 RGB and S90 RGB comes with a diamond-cut look and its illumination is provided by the Sharkoon logo and a chic 3D infinity mirror effect. The water block of the S70 RGB presents itself with a reflective gloss surface and illuminated lettering. With of all three models, the water blocks can be rotated and thus the logo and lettering can be correctly aligned horizontally.

Compatible With All Current CPUs

Thanks to the supplied mounting brackets for CPUs of all manufacturers, the three all-in-one water-cooling models are prepared for use without complication in nearly all kinds of PC cases that support 240-millimeter or 360-millimeter radiators.

Flexible Tubing for Easy Installment

The installment of these all-in-one water-cooling solutions should be easy thanks to their flexible tubing. They are therefore ideally suited for use on the front, top or bottom panels of the PC casing. In addition, the tubing is textile braided for extra robustness and to protect from any possible damage.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the RGB Hex, Sharkoon is launching an ATX PC case that is optimized for airflow and has a front panel with a 3D hexagon design, from which the case gets its name. The case, with its conspicuous looks, offers an air-permeable front panel along with six pre-installed RGB LED fans that are all fully addressable. The case is complete with a side panel made of tempered glass and a modern USB Type-C port near the front panel on the top of the case.

Made for Cool Temperatures

The front panel of the RGB Hex not only has a striking design, but it also largely consists of an air-permeable mesh that should ensure a strong intake of cool air. Behind the front panel, three fans draw the air through the mesh grille into the case, while a fan on the rear panel and two on the top are intended to remove the warmed air out of the case. All these pre-installed 120-millimeter fans are equipped with addressable RGB LEDs. Meanwhile, the interior of the case is protected from dust by three dust filters. Anyone who prefers water cooling can install a radiator in the front or the top of the case. Behind the front panel, the radiator can be up to 360 millimeters and have a total height of 6.4 centimeters including the fans. Under the top panel, a radiator with up to 240 millimeters is possible with a total height, including the fans, of 5.5 centimeters.

Spacious Interior for Large Components.

As usual for gaming cases, the RGB Hex has a side panel made of tempered glass, through which the user's installed hardware and its illumination can be admired. Accordingly, the ATX case should also offer enough space for powerful hardware components. The case has space for graphics cards up to 35 centimeters in length, CPU coolers up to 15.8 centimeters in height, and power supply units up to 21.5 centimeters in length. Furthermore, there is also space for the installation of up to two 3.5-inch hard drives and up to six SSDs.

Performance When Connecting

The manufacturer Sharkoon has paid attention to performance and ease of use when it comes to the connection options of the RGB Hex. In addition to two USB 3.0 ports, the I/O panel is also equipped with a USB Type-C 3.2 Gen 2 port that enables the use of mobile devices through the PC at a fast data transfer rate of 10 gigabits per second.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the M30 Black and the M30 RGB, Sharkoon introduces new models, following on from its popular M25 series. Thanks to its unpretentious yet elegant design, the M30 Black should be able to be integrated harmoniously into any work environment. The M30 RGB, on the other hand, should primarily appeal to gamers thanks to a gaming-styled look with an RGB fan and a side panel made of tempered glass.

Clear-Cut Design Focusing on Performance

Both the M30 Black and the M30 RGB have an elegant, rather minimalist appearance with a clearly purposeful design. The center of attention is the front panel with rounded edges and a large perforated, mesh surface that should enable a strong airflow. Near the front of the top panel, both case versions have a modern USB Type-C connection for fast data transfer. There is also a generous amount of options for cooling: Each case offers space for up to seven 120-millimeter fans, and if the installation of a water-cooling system is desired, there is enough room for a radiator with up to 360 millimeters either under the top of the case or behind the front panel.

Perfect for the Office…

Two new SilentStorm BW120 PWM fans are already pre-installed inside the windowless M30 Black: one on the rear panel and one behind the front panel. The fans, which are also offered separately by the manufacturer, completely do without RGB illumination and are designed for operation in work environments thanks to their fluid dynamic bearing, adjustable 1,400 revolutions per minute, and interchangeable vibration dampers in black and white.

...or for Exciting Gaming Sessions

As with the M30 Black, the RGB version also has a SilentStorm BW120 PWM fan behind the front panel. However, the rear panel has been equipped with a 120-millimeter PWM fan which has addressable RGB LEDs that can be controlled via the included RGB controller to provide effects and adjust the color. The built-in hardware components can then shine through the side panel made of tempered glass.

Lots of Room

Both case versions offer space for graphics cards with a length of up to 38 centimeters, and there is room for a CPU cooler with a height of up to 17.2 centimeters as well as a power supply unit with a length of up to 22 centimeters. In addition, a total of two 3.5-inch hard drives or four 2.5-inch SSDs can be installed.

Sharkoon Technologies, an international supplier of high-performance, high-quality PC components and peripherals, is expanding its range of cases with the launch of the RGB Wave. This midi-ATX case gives current hardware components a framework that is both efficient and extraordinary thanks to four pre-installed fans and an air-permeable front panel with a 3D wave design.

An Eye-Catcher

At the heart of the design concept of the RGB Wave is the front panel. This has a series of undulating wave-like strips in front of an air-permeable mesh and set within a carbon-fiber textured frame. It is complemented by a side panel made of tempered glass, through which the built-in hardware can be admired. To visually round things off, three 120-millimeter fans with addressable RGB illumination are installed behind the front panel to accentuate the wave design and the installed hardware with up to 16.3 million colors.

Efficient Cooling for Today's Hardware

In addition to the case’s visual aspects, a good airflow for cooling current hardware systems is provided by the air-permeable front panel in conjunction with the three RGB fans that are pre-installed behind it, as well as another 120-millimeter RGB fan on the rear panel. If necessary, the cooling performance can be supplemented by two additional fans with a diameter of up to 140 millimeters under the top panel and also a 120-millimeter fan on the top of the power supply tunnel.

Up-to-Date Ports

For the top ports near the front of the case, Sharkoon provides two standard USB 3.0 ports as well as the usual audio connections. In addition, the RGB Wave has a Type-C port with the USB 3.2 Gen 2 specification, allowing the connection of modern mobile devices for fast and varied data transfer.

Broad Compatibility for Hardware

Thanks to a tidily configured interior, graphics cards measuring up to 33.5 centimeters can be installed inside this compact midi-ATX case, as well as CPU coolers up to 15.7 centimeters and power supply units up to 17.5 centimeters. In addition, the case has space for a total of five SSDs; and two 3.5-inch HDDs can be accommodated in the HDD/SSD cage if no SSDs are already installed inside this.

Sharkoon Technologies, an international supplier of high-quality, high-performance PC components and peripherals, has now introduced the 3-Port USB 3.2 Gen 1 Aluminium Hub + RJ45 Ethernet Adapter and the 4-Port USB 3.2 Gen 1 Aluminium Hub. Both hubs have an aluminum casing and allow the quick and easy expansion of computers and mobile devices.

3-Port USB 3.2 Gen 1 Aluminium Hub + RJ45 Ethernet Adapter

The 3-Port USB 3.2 Gen 1 Aluminum Hub + RJ45 Ethernet Adapter has been especially developed for laptops and other mobile devices and can expand these with three additional USB 3.2 Gen 1 ports as well as an RJ45 network connection. The hub supports fast data transfer rates of up to 5 Gbit per second as well as Gigabit Ethernet with 10, 100 and 1,000 Mbit per second. The hub connects to devices via a USB Type-A plug. However, the supplied adapter also makes it possible to connect to devices which have a USB Type-C port, and Windows, macOS, ChromeOS and Linux are supported. Thanks to its compact design and robust aluminum casing, the hub should be easy to transport and be ready for use wherever it is taken.

4-Port USB 3.2 Gen 1 Aluminium Hub

Users who do not require an RJ45 ethernet adapter can, instead, turn to the 4-Port USB 3.2 Gen 1 Aluminium Hub. It expands computers with four additional USB 3.2 Gen 1 ports and, like the 3-port hub, is made of robust aluminum. Along with the included USB Type-C adapter, the hub can be used on mobile devices which operate through Windows, macOS, ChromeOS and Linux. In addition, it delivers fast data transfer of up to 5 Gbit per second and is conveniently connected via an integrated USB cable that has a length of 45 centimeters as well as a common USB Type-A plug.

Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. With the SKILLER SAC20 and the SKILLER SAC20 S4, Sharkoon now presents two PBT keycap sets for mechanical keyboards that have been developed in cooperation with the keycap specialist Tai-Hao. Both sets are available for the common ANSI layout or as an ISO version.

Made with Know-How

The SKILLER SAC20 keycap sets were created in cooperation with the long-established Taiwanese company Tai-Hao, which has been in the market since 1962 and is internationally known for its quality-made keycaps. Accordingly, the SKILLER SAC20 keycaps feature elegant, abrasion-resistant lettering, being made of high-quality PBT via double-injection molding. In addition, this manufacturing process ensures a high degree of color stability and resistance to the gloss effect, which can be observed with conventional ABS keycaps after longer periods of intensive use.

SKILLER SAC20 – Suitable for all Sizes

The SKILLER SAC20 keycap set consists of either 104 keycaps to precisely suit a full, 3-block ANSI layout or 105 keycaps to suit a full ISO layout. Thanks to the ten extra keycaps that are included in the set as well as the compatibility with commonly available cross-mount switches, they should also be ideal for use with smaller keyboard layouts. As an added bonus, the set also comes with two Sharkoon keycaps and one Tai-Hao keycap, as well as a keycap puller tool.

SKILLER SAC20 S4 – Specially made for the SKILLER SGK50 S4

The SKILLER SAC20 S4 keycap set takes a different approach: It was specially developed as an addition to the SKILLER SGK50 S4 keyboard and therefore has precisely matched inscriptions on the keycap sides for either the 61 keys of the ANSI layout or the 62 keys of the ISO layout. This set also comes with two Sharkoon keycaps and one Tai-Hao keycap, as well as a keycap puller tool.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the SHARK XTend 16 and the SHARK XTend 24, Sharkoon introduces two PSU extension cables for graphics cards and mainboards. With their addressable RGB illumination, the cables provide additional highlights to the inside of the PC case.

RGB Highlights

The SHARK XTend 16 is intended for use between the power supply unit and the graphics card and has eight addressable RGB LEDs. The SHARK XTend 24, on the other hand, connects the power supply unit to the mainboard and has 24 addressable RGB LEDs. Using an RGB control that has a 5V-D-coded-G pinout, the colors and effects of both extension cables can be customized as desired. Therefore, the cables should effectively provide additional highlights inside the PC case and complement the existing illumination.

Simple installation

According to the manufacturer, both cables have an ideal length to enable an effortless installation and handling, with the SHARK XTend 16 measuring 16 centimeters and the SHARK XTend 24 measuring 24.5 centimeters. In addition, both cables are flexible to allow for more adaptability during the installation. For extensive use in any PC case and for the greatest possible compatibility with all common power supply units and graphics cards, the SHARK XTend 16 is equipped for two 6+2-pin connections. The SHARK XTend 24, on the other hand, has a 24-pin connection and is compatible with all commercially available power supply units and mainboards that have a 24-pin ATX connector.

– Sharkoon Technologies is an international supplier of high-performance, high-quality PC components and peripherals. Sharkoon has now widened its comprehensive range of gaming equipment to include two new desks. Both models, the SKILLER SGD10 and the SKILLER SGD20, come with a tabletop-sized mouse mat and provide enough space for all the monitors and peripherals, as well as the PC. The gaming desks also offer an extensive cable management and a headset holder.

Resilient

With a tabletop that is 160 centimeters long and 80 centimeters wide, the SKILLER SGD10 should offer enough space for the PC, the monitors, all the peripherals, plus several office utensils. If anyone needs even more space, they can turn to the SKILLER SGD20, whose tabletop is somewhat larger with a length of 180 centimeters and a width of 85 centimeters. Thanks to a robust steel frame construction, both models have a load capacity of up to 100 kilograms, and, in addition, the height of the desks can be adjusted in three stages via the extra-large legs. To ensure that every move can be performed unhindered during the game, the manufacturer has equipped both models with a mouse mat that covers the entire top of the desk.

Neat and Tidy

For extensive cable management, both gaming tables have two cable outlets near the rear edge of the tabletop. Through these, cables can be routed, out of sight, into a cable channel at the back of the desk. As well as these two cable outlets, the SKILLER SGD20 has another opening in the middle of the tabletop. With this inconspicuous, additional outlet, the peripherals’ cabling should be more easily tamed on the SGD20’s larger surface. Another cable channel can be attached magnetically onto either the right or the left leg of both models. As an extra feature, the desks also come with a headset holder that can be attached at the front of the desk, as desired, either to the left or to the right of the user.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the PureWriter RGB White, Sharkoon now presents a new, radiant white edition of the popular PureWriter keyboard, appearing in two versions: as a model with a three-block layout and as a TKL model. The three-block version comes with four additional multimedia keys above the number pad for easy volume control and for opening the mailbox. Users can also choose between two Kailh switch types: the feedbackless Kailh Choc Red and the Kailh Choc Blue, which has tactile and acoustic feedback.

One Design in Two Versions

The PureWriter RGB White is available either with a three-block layout or with a TKL layout. The three-block version also has four multimedia keys to open the email program and to adjust or mute the volume.

Two Types of Low-Profile Kailh Switches

The height of the key caps is 6.2 millimeters, and due to the reduced tension in the wrists, a more ergonomic way of working should be possible, whether at home or in the office. The user can also choose between two types of Kailh switches: the red switches, which are particularly suitable for gamers thanks to their linear switch properties and a short 1.5-millimeter distance to the actuation point; and the blue switches, which are particularly suitable for prolific writers thanks to their tactile switch properties and the clearly audible feedback. Both types of switch offer an operating life cycle of at least 50 million keystrokes.

Steplessly Adjustable RGB Illumination

The lighting of the PureWriter RGB can be configured without software. Using key combinations, the keyboard can be illuminated with various effects. Key combinations can also be used to modify individual effects as desired.

For Practical Use

There are two detachable USB Micro-B cables in different lengths for the PureWriter RGB White: one 50 centimeters long and one 150 centimeters long. This should always ensure practical cable management at the desk.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the launch of the Vertical Graphics Card Kit 4.0, the Angled Graphics Card Kit 4.0 and the Compact VGCK 4.0, Sharkoon has now widened its range of kits for the vertical installation of graphics cards. All three kits correspond functionally to the previous models, but now with the PCIe-4.0 standard, they are designed for the latest graphics cards and mainboards and perform with transmission rates of up to 252 Gigabits per second.

A Suitable Kit for Each Kind of PC Case

The graphics card kits allow graphics cards to be installed vertically in compatible PC cases, which provides an even more pleasing result for the presentation of the cards' illuminated elements. The Vertical Graphics Card Kit 4.0 is currently compatible with the ELITE SHARK CA200, ELITE SHARK CA300 and the TG7M RGB cases. The Angled Graphics Card Kit 4.0 fits perfectly into the special configuration of the REV300 case. The Compact VGCK 4.0, on the other hand, covers the micro-ATX cases of the MS-Y and MS-Z series. Further PC cases should be added to this lineup in the future.

Modern, Fast Standard for Data Transfer

The three kits consist of mounts and riser cables and provide the PCI-4.0 data transfer standard with a fast transmission speed of up to 252 Gigabits per second. They are therefore especially suitable for newer mainboards and graphics cards. For older setups, Sharkoon’s previous 3.0 models are still suitable.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. Sharkoon has now widened its range of gaming chair products by introducing three ergonomic headrest and lumbar cushions with memory foam. Particularly with regard to long gaming sessions, the cushions have been specially developed to support a healthy sitting posture.

Fully Ergonomic

The two headrest cushions, the SKILLER SHC10 and the SKILLER SHC20, can be easily attached, using their adjustable strap, to the top end of a gaming chair that has a high backrest. The cushions are designed to efficiently relieve the neck, especially during longer gaming sessions. While the SHC10 has a classic shape, the U-form of the SHC20 should also make it suitable as a travel cushion, providing additional support for any head position. For the overall relief of the spine, the SKILLER SLC20 lumber cushion is designed to support the lumbar vertebrae in the lower back. The cushion can be simply placed on the gaming chair and requires no attachment.

Comfortable and Convenient

All three cushions have a soft fabric cover that can be easily opened with its zipper. The cover can then be removed and cleaned by hand. The inner material is a high-quality memory foam, which adapts exactly to the user's body shape and then returns to its original form as soon as the pressure is removed.

Sharkoon Technologies, an international supplier of high-quality, high-performance PC components and peripherals, now presents the TK5M RGB. With its modern mesh front panel, four pre-installed 120-millimeter fans and a port for fast USB-C Type-C Gen 2, this compact ATX case been developed for users who value usability, affordability and maximum performance.

Efficient Airflow

With the TK5M RGB, Sharkoon focuses in particular on a well-thought-out airflow. At the core of this is the combination of an air-permeable mesh front and four pre-installed, addressable RGB 120-millimeter fans. Three of these fans provide an optimized air intake behind the front panel, while another fan is responsible for removing the heated air through the rear of the case. If the user wishes to expand the airflow, two more 120-millimeter fans or two larger 140-millimeter fans can be installed under the top panel to provide an additional discharge of used air.

Fast Data Transfer

Another feature of the case is an uncomplicated and fast data transfer. In addition to two USB 3.0 ports, the top panel of the TK5M RGB is also provided with a USB 3.2 Gen. 2 port for quick data access. With a speed of up to 10 gigabits per second, the modern transmission standard offers a data transfer rate that is up to twice as fast as Gen 1 alongside an uncomplicated connection of mobile devices.

Modern Presentation

Due to the case's protruding front frame with its rounded corners, the TK5M RGB appears distinctly modern and yet also classic enough that the looks do not distract from the showcasing of the installed hardware. An included RGB controller synchronizes the illumination of the four built-in fans, which provide for an atmospheric presentation behind the tempered glass side panel. Cable pass-throughs inside the case as well as a power supply tunnel and detachable dust filters all support the tidy presentation.

Optimized Arrangement of Space

Despite its compact size, the TK5M RGB can also accommodate larger hardware. The manufacturer specifies a maximum graphics card length of up to 31 centimeters or, with the front fan removed, 33.5 centimeters. A power supply unit with a length of up to 17.5 centimeters and a CPU cooler with a height of up to 15.7 centimeters can also be installed.

Plentiful Data Storage

The TK5M RGB has also been provided with enough space for data storage: Two 3.5-inch hard drives can be installed in and on the HDD/SSD cage in the underside of the case. Alternatively, a total of two 2.5-inch SSDs can be installed in and on the cage. Two more SSDs can be placed next to the mainboard tray and a fifth on the power supply tunnel.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, now presents the SB2. This is a successor to its popular sound card and features an accessible microphone mute and the quick and simple control of the volume. The sound card requires no drivers, enabling fast and easy use on all computers and laptops. In addition, thanks to the sound card, any headset or headphones with 3.5 mm audio plugs can be connected. The personalized configuration of the audio is made possible using the 10-band equalizer available with the software. The extra-large buttons allow quick and simple volume control and microphone mute.

Various Options for Customization

An optional software to configure the audio according to personal taste and requirements can be downloaded from the manufacturer's website. In addition to virtual 7.1 sound, configurations can also be made using a 10-band equalizer. In addition, quick settings are available in the form of 12 preset equalizer modes. These can be used to tailor the audio to, for example, different styles of music.

A Welcome Addition to the Headset

The large buttons allow easy and accessible volume adjustment and microphone mute. The SB2 has two 3.5mm audio ports for microphone and headphones, whereby the headphone port also functions as a TRRS connection for headsets.

With these ports, all common headsets with audio plugs can be connected to the sound card. It can be connected to all common computers and laptops with a free USB-A port.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the SilentStorm 120 PWM and the SilentStorm 140 PWM, Sharkoon is now launching two fans which each have PWM control. Available as 120-milimeter and 140-milimeter RGB LED fans, and at a maximum speed of 1,400 revolutions per minute, they should always achieve the best possible cooling for the PC case thanks to control from the mainboard. Both models also have nine addressable LEDs and replaceable vibration dampers in two different colors.

Continually Good Performance

Thanks to PWM control, the speed of the SilentStorm PWM fans is controlled exactly as required by the mainboard, up to a maximum speed of 1,400 revolutions per minute. The SilentStorm 140 PWM thus generates an airflow volume of up to 121.9 cubic meters per hour, while the SilentStorm 120 PWM has an airflow volume of up to 93.6 cubic meters per hour.

Runs Quietly

Thanks to PWM fan control and a fluid dynamic bearing, both fan models should be pleasantly quiet, even during maximum performance. At full power, the SilentStorm PWM 120 reaches a maximum of 20 decibels, while the SilentStorm 140 PWM reaches a maximum of 35 decibels.

Customizable RGB illumination

Both fans also have addressable RGB lighting that can be controlled with common illumination software such as Asus Aura Sync and MSI Mystic Light Sync. For the greatest possible compatibility, the RGB LEDs can be connected to the mainboard or to an RGB controller via either a three-pin 5V-D-G or a four-pin 5V-D-coded-G connector.

Variable Looks

The SilentStorm 120 PWM and the SilentStorm 140 PWM are supplied with replaceable vibration dampers in white and grey. Apart from reducing vibration onto the PC, the vibration dampers thus provide a better compatibility to the looks of the existing PC case.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, has now introduced the MS-Y1000 and the MS-Z1000. These are two micro-ATX PC cases made of steel, each with a front panel that is elegantly designed with a pattern of Y-formed or Z-formed airflow openings. Four pre-installed fans should enable an optimal cooling, while the air-permeable front panel provides a constant flow of air into the case. Despite the compact design, large components such as a 240-millimeter radiator can be installed in the top of the case. The MS-Y1000 and MS-Z1000 are available in either black or white.

Always an Eye-Catcher

The cases appear with a unique design in two variations, whereby the MS-Z1000 gets its name from the Z-shaped openings on the steel front panel, and the MS-Y1000 gets its name from the Y-shaped openings. The simple black or white color scheme allows the case to blend into almost any surroundings. The side panel on the left of the case has two parts: a tempered glass window and a grille. Each part can be swapped in its position and mounted either on the top or the bottom of the case.

Optimal Cooling Performance

To effectively cool the inside of the MS-Y1000 and the MS-Z1000, four fans are already pre-installed: two 120 mm PWM fans under the top panel, one 120 mm PWM fan on the bottom panel, and one 80 mm PWM fan on the rear panel. An additional 120-millimeter fan can be installed on the bottom panel.

For Vertical Installation: The Compact VGCK

With the optionally available kit, the Compact VGCK, graphics cards with a length of up to 27 centimeters can be vertically installed in the MS-Y1000 or MS-Z1000. The vertical installation avoids any bending of the card and enables a better presentation of lit elements such as a GPU cooler with RGB illumination. The installation of the kit is very simple: It is attached into the case in just three steps.

Lots of Room in a Small Space

Despite its compact form factor, various large components can be installed inside: A power supply unit with a length of up to 16 centimeters can be placed in the power supply tunnel which is behind the front panel in the top of the case. Next to this, a 240-millimeter radiator with a height of up to 5.5 centimeters (including the fans) can be installed. Up to three 2.5-inch data storage drives or one 3.5-inch drive can also be installed in the case.

Sharkoon Technologies is an international supplier of high-quality, high-performance quality PC components and peripherals. With the SKILLER SGS30, Sharkoon introduces a high-quality gaming chair in two model versions: one with a stylish synthetic leather cover and another with a breathable fabric cover. For the extra relaxation of the spine, both versions come with headrest and lumbar cushions made of memory foam. The backrest of the chair can be reclined and locked at up to 165 degrees, allowing the user to lie back and take a rest. The seat base is thickly padded, making it particularly comfortable. The class class-4 gas lift piston and the robust aluminum five-star base enable a secure hold even under demanding conditions.

Colorful Selection

The SKILLER SGS30 is available in two different versions: one version with a classic fabric cover and another with a stylish synthetic leather cover. The fabric version is available in a black and light grey color scheme with seams along the contours of the backrest. The synthetic leather version is available in four different color schemes: black with subtle color accents in either beige or white; and black with playful color accents in either pink or red.

Especially Comfortable

The SKILLER SGS30 has a particularly thickly padded seat base that should invite the user to hours of sitting. This is supplemented with headrest and lumbar cushions made of memory foam. The cushions support the spine by relieving pressure when sitting for long periods. The armrests can be adjusted in height and can be moved forwards or backwards, and they can also be adjusted at an angle to the left or right.

Solidly Built

The frame construction of the SKILLER SGS30 is made of steel, and the five-star base is made of aluminium. This should ensure a secure hold at all times, even when the gaming chair is subjected to demanding use. The five 75-millimeter wheels with lock function support the stability, as does the class-4 gas lift piston.

Invites to Relax

The SKILLER SGS30 has an integrated tilt mechanism underneath the seat base, which allows the chair to be tilted backwards by up to 14 degrees. The backrest, on the other hand, can be reclined at an angle of up to 165 degrees.

Sharkoon Technologies is an international supplier of high-quality, high-performance PC components and peripherals. With the V1000 RGB, Sharkoon has now widened its popular series of micro-ATX cases by introducing the first version with RGB elements. This micro-ATX case comes with three pre-installed 120-millimeter RGB fans and a side panel made of tempered glass. As with the previous models, the power supply unit and its adjacent cables can be concealed in the tunnel at the bottom of the case. Hardware cabling can also be led out of view using the cable pass-throughs of the mainboard tray. Despite the compact form factor, a 240-millimeter radiator or a 40-centimeter graphics card can be installed inside.

Tidy Presentation

A power supply unit with a length of up to 24 centimeters can be accommodated in the power supply tunnel. Using cable pass-throughs, cabling can be routed through and behind the mainboard tray to enable an orderly cable management.

Always Well Cooled

The V1000 RGB comes with three pre-installed 120-millimeter RGB fans inside: two behind the front panel and one at the rear panel. Under the top panel, either three 120-millimeter fans or two 140-millimeter fans can be installed. As an alternative to having fans behind the front panel, a 240-millimeter radiator can be installed instead. The height of the radiator including fans can be up to 5.9 centimeters.

Compact Case for Large Components

Despite its compact form factor, larger components can also be installed in the V1000 RGB. Graphics cards with a length of up to 40 centimeters fit into the case as well as a CPU cooler with a height of 15.8 centimeters.

Lots of Room for Data Storage

If a lot of data storage is required, the V1000 RGB offers a number of options for installing HDDs and SSDs: A total of six 2.5-inch drives or a total of two 3.5-inch drives can be installed. There is also the option of installing a 5.25-inch drive.

Brightly Lit

In order to light up the case, the RGB controller of the V1000 RGB can be connected to the mainboard's RGB control using a mainboard pinout of 5V-D-G or 5V-D-coded-G. Selected lighting effects can then be activated as desired through the RGB controller. The RGB of the case is compatible with all common programs for RGB control, such as MSI Mystic Light Sync or ASUS Aura Sync. Alternatively, the RGB controller can also be used to manually select pre-set lighting modes using the reset button on the I/O panel.

Sharkoon Technologies, an international supplier of high-quality, high-performance PC components and peripherals, now introduces the SKILLER SGH50. This is a high-performance gaming headset with Hi-Res Audio certification and carefully balanced audio drivers for immersive gaming and intense music enjoyment. To fit the head, the ear cups and headband adjust automatically and, together with their soft synthetic leather cushioning, should ensure lasting comfort.

Immersive Audio

According to the manufacturer, the audio drivers of the SKILLER SGH50 were continuously optimized during an ongoing process in order to achieve an expressive and crystal-clear sound. In addition, the SKILLER SGH50 has Hi-Res Audio certification as well as a certified frequency range from 10 hertz to 40 kilohertz. In games, opponents can be acoustically located, and explosions can be powerfully reproduced. When listening to music, the sounds of treble, mid and bass are harmoniously balanced so that no details are lost.

Clear and Understandable

The microphone of the SKILLER SGH50 can be detached if necessary, and it is equipped with a pop filter which should effectively filter plosive sounds, enabling clear communication in video conferences and voice chats.

Fits Any Head

According to the manufacturer, particular emphasis has been placed on comfortable wearing. The ear cups, which are padded with supple synthetic leather, and the headband automatically adapt to the shape of the head. The SKILLER SGH50 should therefore be comfortable to wear even after hours of use.

Durable and Modular

According to the manufacturer, the cables are particularly robust and durable, thanks to their TPE sheathing. The modular configuration of the cables allows easy connection to all devices with audio ports. Also, the inline controller can be used to accessibly mute the microphone and adjust the volume.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Now, with the TG7M RGB, Sharkoon is introducing a PC case that should match up to cases of a higher class. In addition to an air-permeable mesh front panel, the case has four pre-installed 120-millimeter RGB PWM fans. As the first case in the series, a 360-millimeter radiator can be installed not only behind the front panel of the TG7M RGB, but also under the top panel. Graphics cards can be installed vertically in the case using a separately available kit. In addition to two USB 3.0 ports, the I/O panel also has a USB-C 3.2 Gen 2 port.

Built for Convincing Cooling Results

According to the manufacturer, the TG7M RGB is especially designed for efficient cooling: In addition to a mesh grille on the front panel, four 120-millimeter PWM RGB fans have been pre-installed in the case: three at the front and one at the rear of the case. Three fans with an edge-to-edge length of 120 millimeters can also be installed under the top panel. The TG7M RGB is the first case of the TG series where a 360-millimeter radiator can be installed either behind the front panel or under the top panel. Depending on the installed hardware, the size of the mainboard and the height of the RAM, there is at least 5 centimeters of space available under the top panel. Behind the front panel there is space for a radiator with a height of up to 6 centimeters.

Tidy Presentation of Hardware

Like the previous models of the series, the TG7M RGB has a side panel made of tempered glass on the left. To ensure a tidy presentation of the built-in components, the screws of the panel are not directly visible from the outside. The front panel is framed on its left and right by a light-grey metal wing which rounds off the sharp edges of the casing. The cable management inside the case with several cable pass-throughs should ensure an unobstructed view of the installed hardware. By means of an RGB control on the mainboard with a pinout of 5V-D-G or 5V-D-coded-G, the illumination can be personalized as desired. Behind the tempered-glass side panel there is also a power supply tunnel with a window for the constant view of the power supply unit.

Spaciously Built

Despite its compact design, the TG7M RGB has plenty of space, even for large hardware components. For example, a graphics card 38 centimeters long can also be installed vertically using an optionally available graphics card kit. Power supply units with a length of up to 22 centimeters can be installed in the power supply tunnel on the underside of the case. The case also has space for up to four 2.5-inch and two 3.5-inch data storage drives.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Now, with the TG4M RGB, Sharkoon presents a version of its popular PC case with a mesh front panel. For an immediately optimized airflow, the ATX case also offers four pre-installed and fully addressable RGB fans with a diameter of 120 millimeters. And, despite its compact design, it should also be able to accommodate demanding hardware components.

Optimized Airflow

Instead of a front panel made of tempered glass, the TG4M RGB is equipped with an air-permeable mesh grille. The characteristic look of the TG series with a see-through front and side panel has been retained, but this time, the aim is to optimize the airflow. This is supported by three pre-installed 120-millimeter fans behind the front panel and another identical fan at the rear panel. All fans can be illuminated according to personal preference via the supplied RGB controller and using a modern mainboard which has the appropriate connection. The integration into existing lighting synchronization systems is also possible.

A Tidy Presentation for Hardware

As with the other cases of the TG series, the TG4M RGB also has a side panel made of tempered glass, through which the built-in hardware can be seen. Together with the illuminated fans, this gives the series its characteristic look, which is intended to especially appeal to gamers. So that no cables interfere with the presentation, these can be removed from view, when necessary, using the cable pass-throughs in the mainboard tray. A detachable dust filter is located behind the front fans for the required protection from dust.

Spacious, Despite the Compact Design

The TG4M RGB has very space-saving external dimensions of 45.5 x 20.0 x 43 centimeters, but it should still be able to accommodate high-performance hardware components. According to the manufacturer, there is room for graphics cards with a length of up to 37.5 centimeters, as well as CPU coolers up to 16 centimeters in height, and power supply units up to 26.5 centimeters in length. In addition, there is space for up to two 3.5-inch HDDs and up to four SSDs. Using the screw slots, these can be mounted onto the mainboard tray and, via the HDD/SSD cage, onto the bottom of the case.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, has expanded its range of gaming chairs with a new entry-level model: The SKILLER SGS20 is available with either a fabric cover or a synthetic leather cover and with four different color accents. The gaming chair offers the familiar ergonomic adjustment options from Sharkoon, such as the tilt function, the adjustable backrest and the armrests that can be adjusted in three ways. But in particular, the extra-wide seat base of 55 centimeters promises a high level of seating comfort.

Sporty Gaming Design

The SKILLER SGS20 is available as a standard version with a synthetic leather cover or as a version with a fabric cover. The synthetic leather version is designed to offer a classic look that fits in well anywhere and is easy to clean. The fabric version, on the other hand, with its breathable fabric cover should provide an even more comfortable seating experience. Both types of chair have the same design of streamlined color highlights, which are available in either grey, blue, red or orange. These color accents are intended to stylishly complement the predominant black of the chair.

Ergonomic Adjustment Options

In addition to the look, both versions offer the ergonomic adjustment options which are familiar from Sharkoon. The backrest can be adjusted to a wide angle of 90 to 160 degrees, while the armrests can be adjusted according to height and angle, and they can also be moved back or forward. A conventional tilt function including tilt lock is also available, as well as optional cushions to support the neck and spine.

Comfortable Gaming

With a seat base measuring 55 centimeters, the SKILLER SGS20 stands out clearly from other entry-level models from the manufacturer. The gaming chair should therefore offer comfortable sitting also to larger users or to those who appreciate a high degree of freedom of movement. The chair is designed for a user height of up to 185 centimeters and a user weight up to 120 kilograms. The basis of this design is the use of a robust steel frame construction, a steel five-star base as well as a class-4 gas lift piston.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, has expanded its range of audio products with two headsets, each with a different focus: The eye-catching RUSH ER40 USB headset with its 3D-effect RGB illumination is aimed at style-conscious gamers, while the B2, in subtle black, cuts a fine figure with its modular cables and detachable microphone. These allow the B2 to be used as pure headphones whether for home or for travel. When it comes to sound and comfort, both headsets are equipped with powerful 50-millimeter drivers and breathable fabric ear pads.

Fully Designed for Gaming: RUSH ER40

Visually and technically, the ER40 comes fully in line with the rest of the popular RUSH series and is therefore especially designed for gaming. In addition to an uncomplicated and rounded design, Sharkoon is using, for the first time, an RGB illumination that has a seemingly spatial and thus striking effect, and which can be operated in two different modes. An adjustable headband and movable ear cups are designed to be comfortable to wear even after extensive gaming sessions. The headset is installed with 50-millimeter drivers, which should deliver the accustomed, punchy audio which is required for immersive gaming sessions. The connection via a 240-centimeter long USB cable ensures ample freedom of movement.

Stylish and High-Performance: B2

As the successor to the B1 headset, the B2 also relies on a stylish design all in black. Due to the detachable microphone, the B2 can also be used as headphones without any hassle. And thanks to a cable with an ideal length of 110 centimeters and TRRS plug, it can even be conveniently used on mobile devices. Further connection options with USB and audio plugs are offered by modular cable segments with a total length of 250 centimeters. According to the manufacturer, the soft fabric surface of the breathable ear pads is especially designed for long periods of comfortable wearing. In addition, the movable ear cups and the headband, which is bound in synthetic leather, adapt to the shape of the head. 50-millimeter drivers are also used for the B2 to provide the appropriate audio. If the B2 is operated via USB, the inline controller will provide a hardware equalizer with three modes as well as the usual adjustments such as microphone mute and volume control.

Sharkoon Audio Center

The audio for both the RUSH ER40 and the B2 can be customized using the downloadable Sharkoon Audio Center. In addition to general settings for the headset audio or for the microphone, profiles can be created, and various effects can be selected and added. Particular attention can be paid to the virtual 7.1 surround sound and to the 10-band equalizer, with which users can make all the settings for their personal audio preferences.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, now presents the SKILLER SGK50 S4 - Sharkoon's first mechanical 60 percent keyboard. Its hot-swap function allows switches to be installed and removed easily, and all switches with 3 and 5 pins are supported. The Kailh switches that are typical of Sharkoon are already pre-installed on the keyboard: The linear red switches, the tactile brown switches or the clicky blue switches. But if the factory-lubricated Gateron switches are preferred, these can be purchased separately with the Sharkoon Switch Set. The keyboard has two pairs of feet and can therefore be positioned at up to three different angles. In addition, two macros with up to 16 macro actions can be recorded or overwritten without the use of any separate software.

Space-Saving Format

The compact layout of 60 percent saves a considerable amount of space on the desk, allowing the mouse to be moved more freely, while the keyboard can be positioned more conveniently while gaming. Thanks to the multiple assignment of the keys, all the functions of a TKL keyboard are provided. This means that the SKILLER SGK50 S4 can still demonstrate full functionality with its handy and compact size.

The Required Switches

A total of three types of switches from the Kailh brand are available: The linear red switch with an imperceptible actuation point, which, thanks to its low operating force, is primarily aimed at gamers; the tactile brown switch with an actuation point which is not audible but which can be felt and is therefore suitable for both gaming and for office work; and the clicky blue switch, which is especially suitable for prolific writers who prefer the sensation of a typewriter. All switches have a travel path to the actuation point of 1.9 millimeters and an actuation force of 50 grams, as well as having an operating life cycle of 70 million keystrokes.

Complete Creative Freedom

Thanks to the hot-swap function, switches can be installed and removed in a few simple steps. A keycap puller tool and a switch puller tool are supplied with the keyboard for this purpose. All switches with 3 and 5 pins can be installed.

Completely without Software.

With just a few key clicks, two macros with up to 16 macro actions can be recorded and overwritten without the use of software. The illumination of the SKILLER SGK50 S4 can also be set up just as easily: Using key combinations, lighting effects can be selected, and their brightness can be adjusted.

Additional Switch Types Available

In addition to the three switches available for this keyboard, Sharkoon also offers 8 different switch sets, each with 35 switches from the Kailh and Gateron brands. All switches have either linear or tactile properties, while the Gateron switches are also factory lubricated. According to the manufacturer, this should enable the switches to be operated more smoothly and deepen their sound.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SHARK Blades PWM and the SHARK Disc PWM, Sharkoon now presents its first PWM fans. Through the mainboard's control, and with a maximum speed of 1,400 revolutions per minute, these fans should enable an optimal cooling of the PC case. In addition to a wide range of illumination colors, the two fans have different designs: The SHARK Disc PWM is glass-transparent, allowing the illumination to shimmer through its borders. The SHARK Blades PWM, on the other hand, is kept in minimalist black and has fan blades with protruding lines for a dynamic display when in operation. Thanks to the RGB LED effects, the fans should blend seamlessly into the PC case with all the other illuminated components.

Precisely Tailored Performance

The SHARK Disc PWM and the SHARK Blades PWM each offer a speed of up to 1,400 revolutions per minute with an airflow volume of up to 94.8 cubic meters per hour for the SHARK Blades PWM and 82.35 cubic meters per hour for the SHARK Disc PWM. The speed can be controlled by the mainboard.

Smooth Performance

Even at full speed, both the SHARK Blades PWM and the SHARK Disc PWM are barely louder than a whisper in the room. Their volume is specified at around 24.8 dB(A). The fluid dynamic bearing also supports the smooth performance.

Creative Illumination

A compatible RGB controller for the mainboard can be used for setting the 9 RGB LEDs of the SHARK Disc PWM and the 20 different RGB LEDs of the SHARK Blades PWM. The lighting offers a selection of up to 16.8 million colors.

High Compatibility

The lighting effects of the SHARK Blade PWM and the SHARK Disc PWM can be controlled with the software Asus Aura Sync, MSI Mystic Light Sync and Gigabyte RGB Fusion 2.0 Utility. For the greatest possible compatibility, the RGB LEDs can be connected to the mainboard either via a 5V-D-G connection or via a four-pin 5V-D-coded-G connection.

Reduced Case Vibration

The rubberized contact points reduce the case vibration and further support the smooth running of the fans.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, has now introduced two new mouse mats: the SKILLER SGP30 Big Hex and the 1337 V2 Big. The Big Hex presents itself with a hyper-realistic 3D motif design, while the 1337 V2 Big comes in minimalist black. Both mouse mats are 120 centimeters long and 60 centimeters wide, making them Sharkoon's largest mouse mats so far.

Extraordinarily large

Both the SKILLER SGP30 Big Hex and the 1337 V2 Big, with their length of 120 centimeters and a width of 60 centimeters, are the largest mouse mats from Sharkoon to date. They can therefore cover a large part of the tabletop and offer ample room for mouse movements.

Particularly Robust

According to the manufacturer, the rubber underside always offers a firm hold, even under demanding conditions. Also, thanks to its sublimation printing, the hexagon motif of the SKILLER SGP30 Big Hex should be able to withstand a high degree of intensive use - just as much as the minimalist black surface of the 1337 V2 Big.

No Fraying

The robust stitching along the edges should support a long service life without fraying at the edges, and, according to the manufacturer, both the SKILLER SGP30 Big Hex and the 1337 V2 Big will hardly show any signs of wear even over a long period of demanding use.

Suitable for Cleaning

The enormous gliding ability of the two mats should be suitable for quick mouse movements and rapid reactions. Moreover, as water simply rolls off the mats, their water-repellent properties make them suitable for cleaning with a soft, slightly damp cloth.

Sharkoon Technologies, an international supplier of high-performance quality PC components and peripherals, now presents its latest gaming keyboard, the SKILLER SGK60. This is a three-block keyboard with multimedia keys for the convenient control of videos and music, and which also has a macro key for keeping the upper hand in any game. The SGK60 comes with Kailh BOX switches as standard, whereby the user is free to choose from three switch types for the keyboard. In addition, 14 especially durable PBT keycaps are included. Thanks to double-injection technology, these should offer long-lasting use, free of wear and tear. The edges of the keyboard are diamond cut for an overall elegant appearance.

Kailh BOX Switches

Thanks to the high-quality mechanical switches from Kailh, the keyboard is particularly beneficial for professional gamers. The red switches are worthwhile for gamers thanks to their linear switch characteristics and the low operating force required. The brown switches are suitable for both work and gaming due to their tactile characteristic with an inaudible feedback. Frequent writers can enjoy the white switches, which should give them the sensation of a typewriter when using the keyboard.

Creative Freedom via the Software

The software for the keyboard can be downloaded from the Sharkoon website. This can be used to produce the various illumination effects and color combinations for the keyboard keys as well as for the Edge Light, the lighting located along the rear edge of the SGK60. There are fifteen effects available for the keys and ten available for the Edge Light. The colors of the illumination effects can be adjusted as desired. The software also has a macro manager to record macros with up to 390 macro actions in total. The settings of the individual actions allow themselves to be modified as required.

Made for Durability

The SGK60 is especially characterized by its stable, long-lasting Kailh-BOX switches: They all have an operating life cycle of at least 80 million keystrokes, while the design form protects the switch from dust and dirt. In addition, 14 especially durable PBT keycaps are included. Thanks to double-injection technology, these should offer long-lasting use without showing signs of wear.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SKILLER SFM11, Sharkoon now presents a hard-wearing floor-protection mat in four different motif designs. With a diameter of 120 centimeters, it offers a wide range of movement, which is particularly advantageous in hectic game situations. The underside is made of nonslip silicone, which means that the mat should always hold its ground, even during the most forceful movements from above. The thickness of five millimeters protects any surface from scratches caused by chair casters and effectively muffles noises. In addition, the polyester surface allows the mat to be easily cleaned.

Choice of Four Motif Designs

With the SFM11, there is a choice between four different motifs. The “Gaming Area” design imitates the surfing style of the 1960s in light pastel colors. The “Hex” design represents a hyper-realistic 3D depth effect. The “Retro” design adorns a city skyline with the style of the 1980s. And for the “Cubes” design, the name “Sharkoon” forms a cube in three rich colors.

Noise Dampening, Nonslip and Hard-Wearing

The five-millimeter material thickness enables effective dampening of noise from moving chairs. The silicone underside keeps the mat firmly in place, and, thanks to the thick, multiple stitching as well as the heat transfer printing, this floor protection mat has been made to be long-lasting.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Sharkoon now presents a new mechanical keyboard: the SKILLER SGK3 White. This is a keyboard which boasts long-lasting mechanical switches as well as a durable overall design. The white finish gives the keyboard an unobtrusive look, while the integrated RGB lighting can be customized using the downloadable software.

Responsive Kailh Switches

In order to suit different user needs, Sharkoon offers the SKILLER SGK3 White in different switch versions. The model with red switches is characterized by a linear switch characteristic without clicking noises or resistance and is therefore ideally suited for frequent gamers. For prolific writers in office settings and for casual gamers, the versions with the tactile blue or tactile brown switches are suitable options. With an operating force of 50 grams, all three types of switches actuate after only 1.9 millimeters.

A Variety of Adjustment Options Using with the Software

Thanks to the downloadable software, extensive settings can be made, allowing the keyboard to be configured according to preference. For example, individual keys can be re-assigned, and macros can be created, saved and edited. In addition, the various illumination settings of the SKILLER SGK3 White are made fully available through the software, providing a wide range of customization. The software also allows quick and easy access to more than 15 preprogrammed lighting effects and can be used to create personalized lighting profiles. The white surface of the keyboard housing complements the illumination by providing a reflection of the chosen colors.

Durable Design

Sharkoon has paid attention to the choice of components when designing the SKILLER SGK3 White. Whether the red, blue or brown ones are chosen, the durable mechanical switches promise a long device life. The package also includes an additional keycap set, the SKILLER SAC14. The set's keycaps are made of PBT, which is a particularly robust material, and can support the user by highlighting frequently hit keys. With a life cycle of over 50 million keystrokes, the keyboard demonstrates a high degree of overall durability. The upper surface of the keyboard is made of metal, which should also contribute to the resilience and service life of the SKILLER SGK3.

Sharkoon Technologies is an international supplier of high-performance, quality PC components and peripherals. With the CA700 from the ELITE SHARK series, Sharkoon now presents its first open-frame PC case. Apart from the futuristic design, it should also impress with its cleverly designed interior. This provides room for up to eight fans and allows the simultaneous operation of two 360-millimeter radiators. In addition, the case offers extensive modification options: It can, for example, be tilted and locked in up to four positions via its base.

High-Quality Open-Frame Design

Five pre-installed, fully addressable PWM fans, with a diameter of 120 millimeters, and a case design which is open on all sides should all ensure the ideal cooling, even with power-hungry hardware. However, if anyone wants the case to be both water-cooled and even more eye-catching, then the spacious interior offers a particularly creative solution: For future-proof heat dissipation, a 360-millimeter radiator can be installed in the top of the case, and, at the same time, another 360-millimeter radiator can be operated next to the mainboard tray.

Extravagant - Inside and Outside

So that the presentation of the built-in hardware can be just as extravagant as the PC case itself, the CA700 comes with two mounting frames to vertically install a graphics card: one mounting frame for cards that require two slots and another for cards that require three slots. The manufacturer has also included the necessary riser cable in the case's package contents. The large side panel made of tempered glass allows the graphics card as well as the built-in fans or other illuminated elements to come into their own.

Practical and Convenient Features

In addition to its most conspicuous highlights, the ELITE SHARK CA700 offers many other smaller features which provide ease and convenience for creative hardware installation. Thus, for proper cable management, the case has several cable pass-throughs, and hook-and-loop cable ties are also supplied. And for additional flexibility, the water-cooling pump or the reservoir can be attached in one of two positions. For safe and easy handling, the tempered glass side panel is supported with a mounting bracket, and the front and top of the case have practical panels that can be easily opened and locked into position when necessary. According to personal taste, the body of the CA700 can be tilted and locked at four different angles via its base.

Lots of Space for Large Components

With dimensions of 63.2 x 25.0 x 67.0 centimeters, the ELITE SHARK CA700 is also the largest Sharkoon PC case to date and should thus offer a correspondingly large amount of space for the biggest components. For example, the maximum length of the graphics card is 47.5 centimeters, the maximum length of the power supply is 19.5 centimeters and the maximum height of the CPU cooler is 16.5 centimeters. In addition, there is room for six 2.5-inch SSDs and two 3.5-inch HDDs.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SKILLER SGS2 Jr., Sharkoon now presents its first ever gaming chair which has been especially made for children. Its ergonomic form and a backrest which can be reclined up to 135 degrees allow users to comfortably relax after doing their homework or between those occasional sessions of gaming. At the same time, a breathable upholstery provides further comfort for hours of gaming fun.

Small but Mighty!

The Junior version only differs from the original SGS2 in its size, presenting itself with a sporty design and catching the eye with a choice of four dynamic color schemes. The ergonomic shape and adjustable seat-height not only allow modification for the sitting posture, but also provide a long service life as the user gets older.

Comfort without End

The user can also lean back with ease on the SGS2 Jr.: The backrest can be reclined to 135 degrees, and a relaxing break can be taken for a few moments after a studying hard for school. A spring supported tilt mechanism provides additional comfort.

Breathable Upholstery

As far as comfort is concerned, the SGS2 Jr. not only offers its mechanical features, but it also has a breathable textile covering. The durability of the covering contributes to the longevity of the chair, and it should easily meet the demands of everyday use. Neck and lumbar cushions have been included with the chair to avoid the signs of a stiff neck or back pain - even after long periods of sitting. They can be attached or removed within seconds, and the cushion covers are easy to clean.

Secure Seating

The five-star base is made of a solid synthetic material and ensures a permanent, secure stand at all times, even during demanding use. The chair offers itself as a stable construction and is therefore suitable for children and young people up to a weight of 65 kilograms.

Sharkoon Technologies is an international supplier of high-performance, quality PC components and peripherals. With the REV300, Sharkoon now presents a PC case of a different kind. Besides seven pre-installed PWM RGB fans for optimal cooling, the case also comes with addressable fan LEDs for customized lighting. In addition, since the tempered glass side panel is placed on the right-hand side of the case, the REV300 offers the possibility for a better presentation of the illuminated hardware components.

Optimal Results for Cooling

With seven pre-installed, addressable PWM fans, the REV300 is equipped with maximum cooling capacity as standard: There are three 140-millimeter fans behind the front panel and three 120-millimeter models at the rear of the case, as well as one more with 120 millimeters under the top panel. These RGB fans are supported by the front panel's mesh grille which facilitates the airflow. Water cooling can also be built into the REV300: A radiator of up to 360 millimeters can be installed at the rear, and there is even space for a radiator of up to 420 millimeters at the front, provided that it does not exceed 3.2 centimeters in height. Furthermore, it should not be longer than 46.5 centimeters and no wider than 14.1 centimeters.

Especially Innovative

The PC cases of the REV series are known for the unconventional positioning of components such as the graphics card, which can thus be better presented. The REV300 is no exception: Thanks to the mainboard which can be installed at a 90-degree rotation, all the components can be advantageously displayed through the glass panel on the right-hand side of the case. The tempered glass panel itself is attached with a magnetic closure to the front the case and with hinges to the back, making it quick and easy to open and close. In addition to the novel installation of components, the user is also offered a USB-C port in addition to the four usual USB ports on the I/O panel.

A True Colossus

The design and the size of the case should result in an impressive presentation of the case itself as well as the components which are installed inside. Slightly protruding corners form a frame for the mesh-covered front panel, and the effect is a dynamic, elegant presentation of the three RGB fans. Its simplicity also emphasizes the impressive illumination of the fans, while the installed RGB components are showcased from behind the glass panel.

Immense Amount for Room for Hardware

With its enormous dimensions, the REV300 is particularly suitable for those who value large amounts of space for high-quality components. Graphics cards up to 34.5 centimeters in length can be installed in the case without any problems, as can CPU coolers up to 17.7 centimeters.

Possibilities without Limits

Power supplies with a maximum length of 27 centimeters can also be easily installed inside the case. In addition, the Angled Graphics Card Kit should also not go unmentioned. This is a mounting which has been specially designed for the REV300 and allows graphics cards to be showcased to their full advantage.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the TG6M RGB, Sharkoon now presents a variation of its popular TG6 RGB ATX case. With this latest addition to the “TG” PC case series, particular importance has been given to a strong airflow, and the tempered glass of the front panel has been thus replaced by an air-permeable mesh grille. And this time, the fans have circularly arranged LEDs, bringing the case closer to the traditional look of previous models.

Strong Airflow

Thanks to the front panel with the mesh grille, the TG6M RGB aims to ensure a continuously optimal temperature, even when the system is in full operation. Behind the front panel, three 120-millimeter addressable RGB LED fans with rubberized contact points are pre-installed, with no visible screws and in a modular framework. A fourth fan of the same type ensures that the heated air is removed through the back of the case. As an option, three additional 120-millimeter or two 140-millimeter fans can be installed in the top of the case, which is protected by a dust filter. Additional dust filters in the front and in the underside of the case should provide additional protection against dust and dirt.

Optional Water Cooling

Like the previous TG6 model, the TG6M RGB has a completely detachable fan tray. If desired, this facilitates the installation of a radiator behind the front panel. A radiator with a length of up to 360 millimeters and an installation height of 5.2 centimeters will find room here.

Designed for Eye-Catching Light Effects

The pre-installed 120-millimeter fans should not only ensure a strong airflow, but also provide a vivid illumination of the built-in hardware. The tempered glass side panel, which is unobtrusively attached to the rear of the case with thumbscrews, draws the attention to the user's personally configured hardware. To set the stage for this, there is a pre-installed RGB controller, provided, as usual, by Sharkoon in its PC cases. The controller allows the connection of up to eight LED elements. Colors and effects can then be freely customized using the software of compatible mainboards which have a 5V-D-Coded-G or 5V-D-G pinout. A manual control option is available for mainboards without a connection for addressable LEDs. The manual control can be used to switch through twenty lighting effects using the reset button. It is also possible to switch off the entire lighting.

Tidy Space for Components.

The TG6M RGB offers just as much space for high-performance components as its predecessor: There is enough room for graphics cards with a length of up to 40 cm and CPU coolers with a height of up to 16.7 cm. Power supplies with a maximum length of up to 20.5 cm can also be accommodated. Up to three 3.5-inch or four 2.5-inch data storage drives can be installed in the case: in a moveable HDD/SSD cage, or behind the mainboard tray or on the power supply tunnel. There are also several cable pass-throughs in the mainboard tray to keep the cabling tidy.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Sharkoon is now launching a new 120 mm RGB LED fan onto the market: the SHARK Disc. The fan aims to make its mark not only with its constant airflow and low-noise operation, but also with its addressable RGB LEDs and a high compatibility.

Colorful RGB Illumination

The SHARK Disc fan from Sharkoon is equipped with nine addressable LEDs, which allow lighting effects to be produced in a range of 16.8 million colors. The illumination can also be customized using the software of compatible mainboards which have a 5V-D-G or a 5V-D-coded-G pinout.

High Compatibility

The SHARK Disc fan is compatible for use with Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and most other synchronization software, allowing an easy integration into corresponding systems.

Smooth Operation

The SHARK Disc fan is equipped with a fluid dynamic bearing, which keeps the noise level low even during continuous operation. And at full operation, the fan will not exceed the mark of 17.5 decibels.

Decoupled Running

Thanks to its rubberized contact points, the direct contact of the SHARK Disc fan with the PC case is reduced, resulting in optimized running smoothness with minimized case vibration.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Sharkoon now presents its latest mouse mat, the SKILLER SGP30 XXL, which aims to impress not only with its workmanship but also with a variety of motifs to choose from. The selection of thematic patterns and tones should ensure that there is the right mouse mat for every taste.

Generous Dimensions

With a length of 900 millimeters and a width of 400 millimeters, the SKILLER SGP30 XXL is almost as big as a table top. There is thus enough space for a keyboard and a mouse as well as other accessories to easily fit on the mat. In addition, the SGP30 XXL should provide ample space for freedom of movement, allowing sweeping maneuvers with the mouse.

Colorful Selection of Motifs

So that there is something for every taste, Sharkoon offers the SKILLER SGP30 XXL in a wide range of motifs. Different patterns are offered with either striking, bright colors or with more subtle, inconspicuous tones, presenting the customer with a varied range of designs.

Quality Workmanship

Thanks to the sublimation printing process, the SKILLER SGP30 XXL is resistant to abrasion, and the mouse mat should also offer optimal sliding properties without frictional drag. The stitched edges prevent the mouse mat from fraying, and, thanks to the rubber base, the SKILLER SGP30 XXL will a give a firm hold on the tabletop at all times. Due to the flexible material, the mouse mat is also easy to transport, as it can simply be rolled up or folded.

Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the Light² 180, Sharkoon introduces the newest member of the Light² family. The gaming mouse aims to impress with an extremely low weight and easy handling. It boasts a high-performance PMW3360 sensor with up to 12,000 DPI and a symmetrical design with a honeycomb-structured upper shell.

Light and Easy to Use

A particularly pleasant handling is offered by the low weight of the Light² 180 at only 63 grams. The honeycomb structure of the upper shell should support a secure hold in the hand while it also contributes to the light weight of the Light² 180. However, the shell can be exchanged for a closed version, which is supplied with the mouse, in just a few simple steps – allowing the mouse to be adapted to individual needs. With dimensions of 120 x 63.5 x 39 mm, the Light² 180 is not only one of the lightest, but also the most compact representative of the Sharkoon Light² series. Thanks to its symmetrical shape, the Light² 180 should offer comfortable use, regardless of the preferred grip and playing style.

Precision Equipment

So that the Light² 180 can be controlled accurately, the mouse is equipped with an optical PixArt PMW3360 sensor. With its maximum resolution of 12,000 DPI, this enables precise maneuvers. DPI settings can be adjusted along seven levels using the downloadable software. The levels can be selected at any time using the DPI switch of the mouse.

Unrestricted Room for Maneuver

So that nothing stands in the way of the uncomplicated use of the Light² 180, Sharkoon has not only focused on reducing the weight. Thanks to its three mouse feet made of 100% PTFE, the mouse glides smoothly over any surface. It should be thus possible to execute fast and fluid movements with high precision. The textile-braided cable, which is extremely robust thanks to its sheathing, provides additional flexibility.

Stylish Illumination

The Light² 180 sets colorful accents via the light strip at its rear, the mouse wheel, which is also provided with RGB lighting, and the illuminated Sharkoon logo inside the mouse. Thanks to the downloadable software, a wide variety of settings can be made with the lighting, enabling a high degree of customization.

Quality Switches and More

The downloadable software also allows the six buttons of the Light² 180 to be freely configured with different functions as well as recorded macros. In addition, Omron switches in the left and right mouse buttons, with a lifespan of over 20 million clicks, ensure the longevity of the mouse.

Pohlheim, 9 March 2021 - Sharkoon Technologies is an international supplier of high-performance, quality PC components and peripherals. Sharkoon has now widened its product range with a white edition of its popular RGB Slider PC case. The RGB Slider White has a simple and minimalistic design, but the case still comes with features which are special for its price range, such as a side panel made of tempered glass and the RGB LED strip integrated in the front panel.

Simple but Stylish Design

With its new white finish, the RGB Slider presents itself again with a minimalist and unobtrusive look. The restrained presentation is only interrupted by the RGB-LED strip, which provides visual variety on the white front panel. Part of the strip has a subtle form which seems to slide across its otherwise straight line, thus giving the PC case its name. Using the built-in RGB controller, the front of the case can be illuminated in fourteen preset color modes. It can also be freely adjusted using the software of compatible mainboards with the support of Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome Sync. Additional RGB components with a 5V-D-coded-G or 5V-D-G pinout can be connected in the case using the installed RGB controller.

Clear Hardware Presentation

The side panel made of tempered glass on the left side of the case provides a clear view of the interior and the installed components. Because it is rested into the frame of the case and then secured at the rear panel, the surface of the side panel remains free of visible screws.

Various Options for Installing Fans

In order to ensure that the individual components have adequate cooling, the RGB Slider White case, like its black counterpart, offers a number of options for fan installation. In addition to the pre-installed 120 mm fan in the rear, there is also space for up to three optional 120 mm fans behind the front panel. In addition, up to two 120 mm fans or two 140 mm fans can be accommodated under the top panel. As an option, another 120 mm fan can be mounted on top of the power supply tunnel.

Designed for Data Storage.

The case of the RGB Slider offers enough space to accommodate several data storage drives at the same time. Altogether, three SSDs can be mounted on the mainboard tray and on the top of the power supply tunnel. The HDD/SSD cage mounted inside the tunnel can accommodate up to two 3.5" HDDs and, if necessary, additional SSDs.

Extensive Hardware Build

As with the previous version, larger types of hardware can also be built into the casing of the RGB Slider White, despite its compact dimensions. A CPU cooler up to 15.7 cm in size can be installed in the case, leaving enough space for a graphics card of up to 33.5 cm.

Pohlheim, 4 March 2021 – Sharkoon Technologies is an international supplier of high-performance, quality PC components and peripherals. With the CA300H, Sharkoon now presents another PC case in the premium ELITE SHARK series. Like the other cases in the series, this sturdy ATX tower is designed for showcasing quality high-end hardware, and, with its generously dimensioned interior, it offers a wide variety of installation options.

Case with Impressive Design

From the outside, the case aims to impress with an overall appearance of sturdiness combined with elegance. The side panels are made of tempered glass, allowing an optimal view into the interior of the case. The top panel of the CA300H is made of metal, while the frame of the front panel is made of polished aluminum. The aesthetic highlight of the case is provided by the ornate geometrical pattern on the front panel, which is emphasized by the light of the addressable RGB LED fans which are installed behind it. The LEDs of all the fans, the I/O panel and further RGB components can be adjusted as desired via the addressable RGB controller.

RGB Illuminated I/O Panel on the Side of the Case

In addition to the striking front panel, the CA300H has another special detail to offer: The RGB lit I/O panel is not conventionally positioned on the top of the front panel but is located on the side of the case. This means that the controls and connections are within easy reach, especially when, for example, the tower is placed for showcasing on the tabletop. In addition to the common connections for audio and USB, the CA300H also has a USB Type-C port.

Effective Cooling Performance thanks to Constant Airflow

For a continuous airflow, three RGB LED fans in the front and one RGB LED fan at the rear of the case are pre-installed inside the CA300H. Moreover, the opened top panel, with its perforated cover, offers sufficient space for locating additional fans or a radiator. The three 120 mm RGB LED fans pre-installed in the front can also be replaced by larger ones with a diameter of 140 millimeters. As an option, an up to 420 mm radiator can be installed behind the front panel, while an up to 360 mm radiator can be installed under the top panel.

Showcase for High-End Hardware

The two tempered glass side panels of the CA300H allow an attractive presentation of the built-in hardware. On the right side of the case, the lower part of the glass panel is toned black. This conceals the inside of the power supply tunnel, so that nothing distracts from the general appearance. Nevertheless, SSDs with RGB elements or imposing HDDs can still come into their own. A hinged compartment, in which cables can be stowed and thus kept out of sight, ensures a tidy overall impression.

Spacious Interior

The interior of the CA300H is generously dimensioned and provided with a well-thought-out layout so that there is also room for complex systems. Graphics cards with a length of up to 42.5 cm can be accommodated in the casing and, just as easily, so can a 24 cm long power supply or a 16.5 cm high CPU cooler. In addition, up to seven 2.5" SSDs or up to four 3.5" hard drives can be installed in the case.

Pohlheim, 28 January 2021 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Sharkoon now presents the SKILLER SGK30. This is a mechanical keyboard which has durable mechanical switches, available with or without feedback, and should thus be suitable for prolific writers and casual gamers as well as eSports enthusiasts. It also has an integrated RGB illumination which can be customized thanks to the downloadable software.

Various Setting Options

Using the downloadable software of the SKILLER SGK30, numerous settings can be made, allowing the keyboard to be modified according to personal preference. Once created, the modifications can be saved in up to 20 game profiles. Also, thanks to the macro function, input commands can be created and saved, while preset function keys enable access to various multimedia actions.

Customizable RGB Illumination

The integrated RGB illumination of the SKILLER SGK30 provides colorful plays of light via the downloadable software. The software gives access to more than 15 pre-programmed lighting effects at the push of a button, providing atmospheric variations to suit the occasion. The software also allows further various lighting adjustments to be made, according to the user's own taste.

Durable and Compact Design

When designing the SKILLER SGK30, Sharkoon gave attention to the choice of the components which would be used for the keyboard. The durable mechanical switches, which are available as either blue or red variants, and the textile braided cable should promise a long service life. With at least 50 million keystrokes, the keyboard also has an above-average durability. The USB connector is gold-plated for interference-free transmission. With a length of 430 millimeters and a width of 144 millimeters, the SKILLER SGK30 is also very compact and lies conveniently flat with a height of only 35 millimeters.

Pohlheim, 15 December 2020 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SHARK Force II, Sharkoon has developed on its popular all-rounder gaming mouse and now introduces a higher performing upgrade with a more powerful sensor and six selectable DPI levels. According to Sharkoon, the ergonomic form and feel of the mouse remains unchanged from the predecessor and offers a particularly pleasant usability and handling.

More Performance and Flexibility

With the SHARK Force II, Sharkoon has revised the predecessor model with an upgrade in performance. Inside the mouse, the work is now being done by an effective PixArt PAW3519 optical sensor. With the six preset DPI levels of up to 4,200 DPI, the mouse can be moved with high precision even during demanding applications. The DPI levels can be switched through at the push of a button to enable even more flexibility when gaming or working. In comparison to the predecessor model, the illumination of the SHARK Force logo serves as a visual indication, giving the user feedback as to the selected DPI level.

Ergonomic Design

Like its predecessor, the SHARK Force II offers a striking design, and the curved sides at back of the mouse offer ergonomic advantages, especially for right-handers. The rubberized surface of the mouse and the thumb rest provide a firm hold for the hand. The two thumb buttons enable additional functions for gaming and for everyday use on the PC.

Pohlheim, 3 December 2020 - Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. Sharkoon now presents the Light² S, a gaming mouse that is extremely smooth to handle due to its low weight. The gaming mouse not only promises unrestricted freedom of movement, but also the symmetrical shape of the mouse makes it suitable for both right and left handers. The downloadable software also offers additional features for a high degree of customization.

Ambidextrous Design

Due to its completely symmetrical design, the Light² S can be used with either hand and is therefore suitable for both right-handers and left-handers. Corresponding to this, the Light² S has two thumb buttons on each of its sides. These can be freely assigned via the downloadable software, which allows the functions of all the mouse buttons to be modified to suit the user's needs. According to Sharkoon, because of the uniform shape of the gaming mouse, it should lie comfortably in the hand and, in conjunction with the special honeycomb structure, ensure a firm grip for both right-handed and left-handed users.

A Robust Lightweight

As the latest gaming mouse in the Light² range from Sharkoon, the Light² S also remains true to the tradition of the series and, thanks to the honeycomb structure of the housing, weighs only 78 grams. This should result in smooth handling and a noticeably feather-light feel. Nevertheless, according to the manufacturer, the mouse is very robust thanks to its well-designed housing and should therefore also be suitable for long periods of use.

Unrestricted Flexibility

According to the manufacturer, the light weight of the Light² S should allow quick and fluid movements at all times so that the user can always keep events under full control. The uncomplicated handling is also supported by the four mouse feet made of 100 percent PTFE, which allow the mouse to glide smoothly over the mouse pad and other surfaces. In addition, the ultra-flexible, textile braided cable should provide maximum flexibility.

Precise Handling

Perfect tracking and top degrees of precision are provided by the high-performance PixArt PAW3327 optical sensor. With a resolution of up to 6,200 DPI, the sensor should allow high-precision maneuvers and, using the Light² S software, can also be customized within five freely adjustable levels. With the help of the DPI switch, the levels can also be easily switched through at any time, always enabling situational adjustment according to different genres and usage behavior.

Varied Illumination

The atmospheric lighting of the Light² S is generated by a light strip running around the mouse. The strip sets colorful accents on the mouse body and emphasizes its streamlined design. In addition, the illuminated Sharkoon logo is recognizable as a subtle highlight through the honeycomb structure at the back of the mouse. Via the downloadable software of the Light² S, the lighting can also be customized with a wide selection of effects and colors from the entire RGB spectrum.

With the Light² 200 White Edition from the same product range, Sharkoon has also introduced another gaming mouse. This was launched on 22 October this year and corresponds to its black counterpart. At 62 grams, the Light² 200 White Edition is not only one of the lightest mice in the world but is also extremely accurate with its high-precision sensor of up to 16,000 DPI. With five mouse feet made of PTFE for very smooth gliding properties and a customizable modular design, the Light² 200 White Edition from Sharkoon provides technology at an e-sport level.

Pohlheim, 1 December 2020 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the TG5 RGB Silent PCGH Edition, Sharkoon presents an ATX case that aims to impress not only with its looks but also with its low noise level. The case is based on the visual design of the predecessor model. However, in cooperation with the computer magazine PCGH, a redesign has been made in order to keep the noise level as low as possible.

Reduced Noise Levels

For the design of the TG5 RGB Silent PCGH Edition, corresponding changes were made to the case in order to be able to reduce the overall volume of the system during operation. For this purpose, insulating mats have been integrated in the top and side panel, which, in combination with the completely closed covering of the case, contribute to a reduction of noise. In addition, special fans are installed in the case which maintain a quiet and smooth operation at 800 revolutions per minute without sacrifices being made in cooling performance.

Colorful Air System

According to the manufacturer, the air-cooling system built into the TG5 RGB Silent PCGH Edition generates an even airflow in addition to setting colorful accents. Three 120 mm fans with addressable RGB LEDs attached behind the front panel illuminate almost the entire front of the case, while a 120 mm RGB LED fan attached at the rear illuminates the inside of the case. The LEDs can be specifically controlled and illuminated as desired using the software of compatible mainboards which have a pin assignment of 5V-D-coded-G or 5V-D-G.

Spacious Interior

According to the manufacturer, the TG5 RGB Silent PCGH Edition offers enough space to also accommodate high-performance hardware. Graphics cards up to 40 centimeters in length can be built into the case as well as power supplies with a maximum length of up to 20.5 centimeters or CPU coolers with a height of up to 16.7 centimeters. Data storage drives of different sizes can also be accommodated. There is space for up to three hard drives with a size of 3.5 inches or up to four SSDs inside the housing.

Chic Showcasing

The tempered glass of the front panel provides a clear view of the three illuminated RGB LED fans which are installed at the front of the case. The tempered glass side panel, on the other hand, provides a clear view of the interior of the case and the hardware components which are installed here. The side panel is rested in the frame of the casing and screwed on at the back of the case so that no visible screws affect the looks.

Tidy Inside

The power supply or storage drives can be hidden in the power supply tunnel or behind the mainboard tray in the right-hand side of the case. In addition, the integrated cable pass-throughs ensure that the cabling disappears from the field of vision, resulting in a look of tidiness inside the case.

Pohlheim, 24 November 2020 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SK3 RGB and the TK4 RGB, Sharkoon presents two compact ATX cases which aim to impress not only with their outward looks but also with what they can offer inside. Stylish glass panels allow a view of the colorful play of colors, which should thus come into their own in the otherwise unobtrusively designed PC cases.

Visually Impressive

With the tempered glass covering on the left side of the SK3 RGB, the case offers a clear view of the installed hardware in the light of the built-in RGB LED fan. This has a diameter of 120 millimeters and is mounted on the rear of the case. In addition to this, the TK4 RGB case has a glass front panel that allows an almost unobstructed view of the RGB lighting inside the casing. The pre-installed 120-millimeter RGB LED fans in both cases should provide an atmospheric illumination of the inner components. With the SK3 RGB, the inconspicuous front panel in carbon fiber style gives a look of elegance without distracting from the colorful light effects inside the case.

Tidy Minimalism

Both the SK3 RGB and the TK4 RGB come in a minimalist design that dispenses with unnecessary gimmicks and should thus contribute to a tidy overall impression. There are various cable openings in the mainboard tray to keep bothersome cables out of sight.

Diverse Cooling Options

The pre-installed RGB LED fans should provide not just a stylish look, but also an optimal airflow and so keep the components sufficiently cool even after hours of operation. The side air inlets at the front of the TK4 RGB, in addition to the three fans which are installed here, will ensure a sufficient air intake. Apart from a pre-installed fan behind the front panel and on the rear panel, the SK3 RGB offers space for two more fans at the front. Both cases offer space for two 120-millimeter fans or two 140-millimeter fans under the top panel.

No Claustrophobia for Hardware

The compact dimensions of the cases should take up little space under the desk, but, at the same time, give the hardware enough space to allow a variety of installation options and a high degree of individuality. Graphics cards up to a length of 33.5 centimeters and CPU coolers up to 15.7 centimeters can be easily accommodated in both models.

Enough Space for Data Storage

Both cases offer sufficient installation options for different storage drive configurations, and so enabling enough data storage capacity for all requirements. Three SSDs can be accommodated at the top of the power supply tunnel or on the mainboard tray, and two 3.5-inch HDDs or additional SSDs can also be installed in the HDD/SSD cage.

Pohlheim, 17 November 2020 – Sharkoon Technologies is an international supplier of quality, high-performance PC components and peripherals. Sharkoon Technologies now presents the RGB Slider, a new midi ATX case with a compact format. The case has a minimalist and simple design, and despite its low price range, it still has special features such as a side panel made of tempered glass and a front panel with an integrated RGB LED strip.

Simple Yet Chic Design

Thanks to its black finish and simple form, the RGB Slider makes a straightforward and unobtrusive impression. For subtle visual variation, the matt black front panel contains an RGB LED strip that can be illuminated in 14 preset color modes via the built-in addressable RGB controller. The lighting of the RGB LED strip can be freely adjusted through compatible mainboards with a 5V-D-coded-G or 5V-D-G pin header and using software such as Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome SYNC. The integrated RGB controller also allows the connection of further RGB components.

Full View into the Case

The RGB Slider possesses a side panel made of tempered glass, located on the left side of the case. This enables a full view of the interior, and the installed hardware components let themselves be seen. The surface of the side panel remains free of visible screws, as the panel is rested into the frame and firmly attached from the rear of the case.

Range of Options for Fan Installation

In order to provide the case with an optimal airflow, the RGB Slider has various installation options for cooling fans. The 120 mm fan which is already pre-installed at the rear of the case can be supplemented with additional fans if required. Behind the front panel, there are locations for up to three 120 mm fans, and under the top panel there is space for two 120 mm or two 140 mm fans. For additionally cooling the installed storage drives, another 120 mm fan can be mounted directly above the power supply tunnel.

Designed for Plenty of Storage

Inside the RGB Slider, a variety of data storage drives will all find room at the same time. Up to three SSDs can be mounted on the mainboard tray or on top of the power supply tunnel. The tunnel itself contains an HDD/SSD cage, in which two 3.5” HDDs can be accommodated or, instead of these, further SSDs.

Takes on Large Components

Despite its compact dimensions, the interior of the RGB Slider is also suitable for an extensive hardware build. The small case presents the possibility of also installing larger examples of hardware. Thus, a CPU cooler can have a size of up to 15.7 cm while a graphics card with up 33.5 cm length will still have sufficient room available.

Pohlheim, 12 November 2020 – Sharkoon Technologies is an international supplier of high-performance quality PC components and peripherals. With the SKILLER SGS40, Sharkoon now presents a spacious gaming chair, which promises maximum comfort due to the generous dimensions provided by a large seat base and a high backrest. Available in four versions, the SKILLER SGS40 also offers a variety of features and is suitable for both gaming and working.

Stylish and Comfortable

Der SKILLER SGS40 is available in four versions. The versions which are furnished with a synthetic leather cover are presented with a high-quality and modern look, which lends the chair a sporty touch. The fabric covered versions, on the other hand, are equipped with a supple, breathable fabric cover, contributing to the overall comfort of the chair.

True All-Rounder

The SKILLER SGS40 has been made for everyday use at work as well as for private use at home, and, due to its generous dimensions, the chair should be able to provide an experience of comfort for almost any kind of user. The SKILLER SGS40 has an extra-large seat base with a sitting area of 59.5 x 53 centimeters as well as a backrest height of 86 centimeters and a load capacity of up to 150 kilograms. The chair is thus suitable for many kinds of user and can unproblematically accommodate a body height of even up to two meters.

Ideal for Gaming and Work

The flexible 4D adjustable armrests can be easily adjusted horizontally and vertically to any arm length and can also be adjusted to the required horizontal angle. The extra-large seat base and the lumbar support is combined with a backrest which can be adjusted at an angle from 90° to 160°, making it possible to sit comfortably as well as inviting the user to relax.

Robust Manufacture

With its the robust steel frame construction, the SKILLER SGS40 offers the necessary stability and sufficient support for gaming sessions as well as at work and so help ensure that the user sits securely. The sturdy gas lift piston and the 75-millimeter wheels with a lock function give the chair additional stability and a firm hold.

Relaxed Gaming and Working

The SKILLER SGS40 not only offers a robust manufacture but should also offer the user a comfortable experience. The spring-loaded conventional tilt, which can be adjusted and locked in steps from 0° to 14°, supports user's natural urge to move and also serves as an extra feature for relaxing during breaks.

Pohlheim, 10 November 2020 - Sharkoon Technologies is an international supplier of quality, high-performance PC components and peripherals. With the RUSH ER30, Sharkoon now presents another highlight in the RUSH ER series. The fourth headset in the series does away with any unnecessary ballast and again just focuses on those things that are important for smooth communication while gaming.

Intensive Sound Experience

With its large, high-performing 50-millimeter drivers, the circumaural stereo headset should be able to deliver an impressive sound with powerfully transmitted bass tones, and so provide a convincing feeling of being in the middle of the action.

Smooth Communication

For effective strategic moves and to avoid any misunderstandings, the microphone can be muted and can also be flexibly adapted to individual needs to enable clear voice transmission at all times.

Easy Usability

Thanks to its USB connector, the RUSH ER30 is "Plug & Play" and is quickly ready to use, allowing the user to fully concentrate on immediate events. The volume and microphone mute can be controlled simply and intuitively on the left earcup. Thanks to the generous 220 centimeters of cable length, the headset should also be able to reach to the sofa for comfortable use at home.

Distinctive Design with RGB illumination

Like its predecessors, the RUSH ER30 aims to make its mark with a distinctive look, presenting itself in a recognizably modern design. For the first time in the series, this model has been equipped with an illumination to provide a focal point of changing colors.

Lasting Comfort

With its adjustable headband as well as the supple synthetic leather ear pads, the RUSH ER30 has been made for comfortable wearing. According to the manufacturer, the ear pads can be replaced by the fabric ones, which are also included with the headset, in a matter of seconds. The fabric ear pads are breathable and should thus be optimal for wearing during heated gaming sessions.

Pohlheim, 24 September 2020 – Sharkoon Technologies is an international supplier of quality, high-performance PC components and peripherals. With the SKILLER SGH30, Sharkoon now presents a newcomer for the versatile SKILLER series. The USB gaming headset with subtle RGB elements has 40-millimeter drivers and a built-in USB sound card for virtual 7.1 sound. With the accompanying software, the sound can be adjusted as desired using a selection of preset effects or the integrated 10-band equalizer. The SKILLER SGH30 is equipped with soft ear pads and a flexible headband for comfortable wearing.

In the Middle of the Action

The closed headphones of the SKILLER SGH30 have 40-millimeter drivers, which should create a balanced sound that is equally suitable for films, music or games. The virtual 7.1 surround sound is especially suitable for gaming or watching films, creating a spatial sound and thus providing an immersive listening experience. For clear voice transmission and communication, the SKILLER SGH30 has a flexible microphone with an omnidirectional characteristic and a pop filter.

Software for Exact Sound Adjustment

Using the downloadable software for the SKILLER SGH30, the playback and the 7.1 sound can be adjusted using a variety of settings. There are a number of setting options to choose from, as well as a wide variety of presets that are also especially balanced for music or films. Using the 10-band equalizer, mids, treble and bass can be finely tuned as desired. There are also some effects available with which recordings made through the microphone can be modified.

Earcups with RGB illumination

With its elegant but simple metal frame, the headset is characterized by a subtle design. For visual variety, this is complemented with an integrated RGB illumination. With a flowing change of colors, the illumination emphasizes the characteristic S of the SKILLER series, which can be seen on the ear cups.

Comfortable to Wear

The SKILLER SGH30 has been developed with a focus on comfort. For this purpose, the ear pads are covered with a soft synthetic leather, so that the ear cups should still feel comfortable around the ears even after hours of wear. Due to the metal frame, the headset sits firmly and securely at all times, while the spring-loaded headband adapts flexibly to the wearer's head without having to be manually adjusted.

Quick and Easy to Use

The SKILLER SGH30 can be quickly and easily connected to PCs or notebooks for immediate operation via its USB plug. With a length of 240 centimeters and a textile braiding, the headset's cable is both convenient and flexible. There are also dedicated buttons on the left ear cup that can be used to quickly and easily adjust the volume or mute the microphone.

Pohlheim, 17 September 2020 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. With the CA300T, Sharkoon now presents another PC case in the premium ELITE SHARK series. Like the other cases in the series, this large and sturdy ATX tower is designed for showcasing quality high-end hardware. This is made possible with a casing made of metal, two side panels made of tempered glass, and well-thought-out installation options.

Solid Case with Elegant Looks

The use of high-quality materials provides the CA300T with the overall impression of an elegant and solid case. The side panels are made of tempered glass. The top of the case is made of solid metal while the front panel has a frame made of polished aluminum. The front panel has a somewhat futuristic design with its geometrically cut pattern, which is illuminated from behind by three RGB LED fans. The LEDs of all the fans can be controlled as desired via the software of compatible mainboards which have a pinout of 5V-D-coded-G or 5V-D-G.

I/O Panel with RGB Illumination on the Side of Case

A special detail that not only sets the CA300T apart from other Sharkoon cases but also from most other cases on the market is the offset I/O panel with RGB lighting. Instead of being placed above the front panel, the I/O panel has been positioned on the side of the case. This means that the controls and connections are easy to reach, especially when the tower is positioned on the tabletop. In addition to the common connections for audio and USB, the CA300T also has a USB-C port.

Constant Airflow for Optimal Cooling

For a continuous airflow, three RGB LED fans in the front and one RGB LED fan at the rear are pre-installed inside the CA300T. The front panel is provided with a mesh grille, which allows sufficient air to flow into the casing. Thanks to the opened top panel with its perforated cover, the CA300T offers an additional location for fans or radiators. 420 mm radiators can be installed at the front, while radiators up to 360 mm can be installed under the top panel. The three 120 mm RGB LED fans behind the front panel can also be replaced by larger ones with a diameter of 140 mm.

High-End Hardware in the Spotlight

So that the installed components can be presented at their best, the CA300T is equipped with two side panels made of tempered glass. These are free of visible screws on their surface and can be easily placed into the frame of the casing in a few simple steps. On the left side, the glass is fully transparent, giving a complete view of the interior of the case and the installed hardware. The right side panel is tinted black at the lower end to conceal the power supply tunnel behind it. SSDs with RGB elements or imposing HDDs will still come into their own. Within the case there is also a hinged compartment in which the cables can be stowed and thus hidden.

Suitable for Large Components

The interior of the CA300T is generously dimensioned and provided with a well-thought-out layout for complex systems and large pieces of hardware. Graphics cards with a length of up to 42.5 cm can be accommodated as well as power supplies with a length of 24 cm or CPU coolers with a height of 16.5 cm. Furthermore, up to seven 2.5" or four 3.5" storage drives can find room within the large case.

Pohlheim, 8 September 2020 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon is now introducing the latest case to the REV series: the REV100 ATX midi tower. Like its predecessors, it features the same innovative case structure which has made the series so popular. The mainboard mount is rotated by 90 degrees with the tempered glass side panel located on the right-hand side. Because of its more compact size, the REV100 is ideal for smaller desks.

Minimalist Design

The front panel of the REV100 has a geometric, angular design with a surface which resembles brushed metal. Highlighting the minimalist front panel design are its mesh grid and the RGB LED strip. In addition, the back of the case is illuminated with a pre-installed, addressable RGB LED fan. Both RGB LED components can be correspondingly adjusted using the pre-installed controller.

A Case Configuration with a Difference

Just like its predecessors, the REV100 offers the unique and innovative case design for which the REV series is known. Because the mainboard is mounted rotated by 90 degrees, so are all the other components inside the case. These are thus installed vertically. There is also a compartment under the top panel with plenty of space to neatly stow cables.

Away from the Usual

As a difference to the usual, the inside of the case is not viewed from the left, but from the right. Therefore, the models of the REV series are particularly suitable for being placed on the left side of the desk. Below the tempered glass, there is a black covering so that the view inside is not disturbed by unsightly cables.

A Case Optimized for Airflow

Even though the REV100 is the smallest case of the series, it offers sufficient airflow with an RGB LED fan in the back of the case and another pre-installed 120-millimeter fan at the front. Here, the optimally sized mesh panel contributes to the airflow. In addition, the detachable top cover is perforated, and is thus air permeable. To prevent unwanted dust and dirt, there are removable dust filters behind the front panel and in the bottom panel.

Space-Saving ATX Tower

With dimensions of 45.2 x 21.5 x 44.4 centimeters, the REV100 is compact and fits easily into any setup. Whether on or next to the desk, the REV100 cuts a fine figure everywhere. So that there is enough space for all components despite the small size, the case does without a power supply tunnel.

Pohlheim, 15. July 2020 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon is expanding further into the field of ultra-light gaming mice and introduces the entry-level Light² 100. With its characteristic lightweight, an ultra-flexible cable and mouse feet made of 100 percent PTFE, this is another model which puts emphasis on smooth and comfortable use. In addition, visual highlights are provided by the RGB illumination, which can be configured via the extensive gaming software.

Optimized, Fatigue-Free Use

With the Light² 100, Sharkoon has put special focus on optimized use and the greatest possible comfort. In addition to a closed upper shell, the gaming mouse has a classic, gradually sloping form designed for right-handed people and which is suitable for either small or large hands as well as all types of grips. Even when it has no upper shell with a honeycomb structure, the Light² 100 only weighs 78 grams. This supports fluid movements and quick flicks from the wrist, while, at the same time, reducing signs of cramping and fatigue of the hand. The mouse feet are made of especially low-friction polytetrafluoroethylene and the textile braided cable provides more flexibility than conventional mouse cables. Thus, the gaming mouse is entirely designed for being moved with the fewest possible barriers.

RGB Illumination with Numerous Effects

Although its handling can stay unobtrusively in the background, the Light² 100 comes visually to the fore thanks to its RGB illumination. This is to be found in the mouse wheel, in the “Light” logo and underneath on the rear of the mouse with its luminous strip. The lighting not only provides visual highlights, but also serves as an indicator when changing the preset DPI levels. For that personal touch, the illumination can be customized with numerous colors and effects using the downloadable gaming software.

Gaming Software for Personal Settings

In addition to the illumination, various other aspects of the Light² 100 can be adjusted and set via the gaming software. Apart from essential functions such as setting the mouse speed and sensitivity, all the buttons can also be individually reassigned, and the DPI levels can be adjusted. The settings are saved, as required, in up to five separate profiles. An extensive macro recording is, of course, also possible.

Pohlheim, 24 June 2020 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. With the REV 220 ATX midi tower, Sharkoon now presents another PC case in the REV series. Like the REV200, this case also possesses a clever and revolutionary case configuration: in comparison to conventional PC cases, Sharkoon has designed for a mainboard which is turned 90 degrees, while the rest of the hardware is thus installed vertically. The PC case is supplied with five pre-installed 120-millimeter fans for the necessary airflow. A cable compartment at the top and a multi-functional tunnel at the bottom also ensure a neat and tidy appearance inside the case.

Chic Front Panel with Carbon Fiber Look

he front of the REV220 has an aluminium plate with a diamond cut. This impressively sets the stage with an RGB background illumination. The plate is placed on a front panel which has a carbon fiber look, providing a distinctly qualitative design to the casing.

A Case Configuration with a Difference

The REV case series distinguishes itself with a revolutionary case configuration, whereby the mainboard is turned 90 degrees when mounted, and the other hardware components are thus installed vertically. The REV220 also has this rather untypical structure and therefore offers all the positive advantages of the predecessor REV200, while the user can experience an entirely different feeling either when installing hardware or when modding. In addition, the cable compartment under the top panel and the power supply tunnel on the bottom panel both ensure tidiness inside the case.

A Fresh Wind from Five Pre-Installed Fans

There are ventilation slots on the sides of the front panel, through which three of the pre-installed 120-millimeter fans ensure a constant airflow. This is supported by two further 120-millimeter fans in the back of the case, which, with their addressable RGB lighting, contribute to an ideal illumination of the hardware inside. In order to further optimize cooling performance, it is also possible to install two 140-millimeter fans in place of the three 120-millimeter models. The front of the case also allows for the installation of a radiator with up to 360 millimeters. In the back of the case, the two pre-installed fans can be replaced by two 140 millimeter versions or a radiator with up to 240 millimeters. The magnetic cover on the top of the case is perforated and thus also supports the air exchange.

The View Inside

The side panel, made of tempered glass, not only completes the timeless and elegant design of the REV220, but it also offers an unobstructed view of the installed hardware. For this purpose, the glass is securely attached via screws on the back of the case. In combination with the RGB lighting of the two addressable fans and the RGB highlight of the front panel, the PC case becomes a real eye-catcher on the top of any desk. And thanks to its reversed design, the case can also be easily placed on the left side of the desk. The fans in the back of the case are also compatible with the RGB synchronization technologies Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion and ASRock Polychrome SYNC. For mainboards without a suitable RGB connection possessing the pinout 5V-D-G or 5V-D-coded-G, the lighting can be controlled via a switch on the top of the case. For an even more extensive illumination, additional, optional LED components can be connected to the pre-installed RGB controller.

Plenty of Room for Components

The REV220 does not lack space for components: Graphics cards with a length of up to 32.3 centimeters, power supplies with a maximum length of 20 centimeters and CPU coolers with a height of up to 16.5 centimeters will fit into the casing. In addition, up to two 3.5-inch hard drives and two SSDs can be installed in the removable cage within the power supply tunnel. Behind the mainboard tray, there are locations for two more SSDs.

Pohlheim, 17 June 2020 – Sharkoon Technologies is an international supplier of top-performing, high-quality PC components and peripherals. Sharkoon now presents its most comprehensive redesign in the 17-year history of the company. As with the original version, the new, modernized logo maintains the effect of being readily recognized due to the shark's fin at its prefix. At the same time, with its rounder emblem design and a straight-lined text, the new logo stands for the continuing development of the company, going hand in hand with the diverse requirements of the PC community.

Sharkoon Technologies was founded in 2003 in the midst of the emerging case modding scene and had the aim of providing creative enthusiasts with new possibilities for fulfilling their hobby. A short time later, the company's first own PC components and peripheral devices were added. These came with illumination, which was still unique at the time, while also focusing on both innovation and cost efficiency. Since then, Sharkoon has developed further still, along with the rapid changes of the gaming industry as well as with customer expectations. Sharkoon, in 2020, no longer stands just for cost-effective gaming equipment and practical PC accessories. In the course of international expansion strategies in new markets as well as changing demands through e-sports cooperations - for example, with Alternate aTTaX or the Eintracht Frankfurt E-Sport Academy - expectations have not only changed toward products, but also in regard to the recognizability of the brand within the global environment.

As with the original version, which was conceived in 2003, the new company logo consists of a stylized shark fin as well as a company name. With its characteristic, triangular form as well as the chosen position and size, the fin provides a high degree of recognizability and stands for stability and performance. The choice of a clearer typeface reflects the affiliation of the brand to the gaming industry, while at the same time ensuring optimal legibility on different sizes of surfaces. The emblem, which is separated from the company lettering, results in a more homogeneous and rounded appearance. This harmonizes optimally with modern product design and can also be utilized, when required, without the company name which comes after it. The shark fin thus allows itself to be used more diversely and without the company name, while avoiding any loss in its recognizability.

The new logo is now to be seen on all newly appearing Sharkoon products.

Pohlheim, 22 April 2020 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. With the TG5 Pro RGB, Sharkoon now presents the reworked version of its RGB illuminated bestseller. Like the original version, the new ATX midi tower presents itself in with an elegant glass-look and with plenty of space inside for the high-performance hardware components. In contrast to the original TG5 RGB, the fans have been replaced with the new addressable models, providing a more extensive illumination.

Designed for Viewing and with a More Extensive Illumination

To optimally present the installed hardware, both the side and front panels of the TG5 Pro RGB are made of tempered glass. So nothing disturbs the view into the inside of the case, the power supply, the cabling and the hard drives can all be concealed in the power supply tunnel or behind the mainboard tray. Four pre-installed 120 mm fans with transparent fan trays and semi-transparent blades all provide an all-encompassing illumination for the hardware. Via the pre-installed controller in combination with the software of compatible mainboards, up to eight connected LED components can be set and controlled. The mainboard must have an RGB connection with the pinout 5V-D-coded-G or 5V-D-G. Even without the appropriate connection, up to twenty lighting effects can be selected using a dedicated button above the front panel.

Maximal Airflow with Locations for up to Seven Fans

Apart from the atmospheric illumination, the four pre-installed 120 mm fans also provide a strong throughput of air for effectively cooling the installed hardware. Three fans are pre-installed behind the front panel, and another fan is already mounted on the rear panel. If required, three more 120 mm or two 140 mm fans can be installed under the top panel. For enthusiasts of water-cooling systems, the front panel of the TG5 Pro RGB offers up to 5.2 cm space for a radiator. Thanks to extra-long slots, the HDD/SSD Cage, which is inside the power supply tunnel, can be variably positioned to create additional space.

Spacious Design Inside

he TG5 Pro RGB offers a spacious interior for high-performance components. There is enough room for graphics cards with a length of up to 40 cm and CPU coolers with a height of up to 16.7 cm. Power supplies with a maximum length of up to 20.5 cm can also be accommodated. In addition, enough space has been allowed for data storage with installation locations for up to three 3.5" drives or four 2.5" drives.

Pohlheim, 15. April 2020 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. They now widen their range of power supplies and introduce the cost-efficient SHP Bronze. This 80 PLUS Bronze certified, ATX form factor power supply is available in two performance classes and is ideal for beginners and system integrators alike, due to its unobtrusive design and excellent price-performance ratio.

Effective Choice for a Variety of Systems

The Sharkoon SHP power supply series has always captivated with its cost-effective power supply models which are suitable for a variety of systems – from office PCs to discreet gaming computers. The SHP Bronze is no exception and is therefore available in two performance classes: one with 500 watts output and another with 600 watts output. Both models have an energy efficiency of up to 85 percent and have been awarded the 80 PLUS Bronze certificate. The standard built-in connections also include an 8-pin and a 4+4-pin CPU connector, which can also be used to supply sufficient power to high performance systems. A quiet, yet strong, 120 millimeter fan ensures continuous cooling.

Easy to Integrate, High Quality Design

The SHP Bronze is deliberately outfitted in an inconspicuous, completely black design including a black fan grill and black textile-sheathed cables. Thanks to this modern, high performance design, it can be integrated into existing systems as well as office PCs or gaming computers.

Pohlheim, 27 January 2020 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon presents the Light² 200, an ultra-lightweight gaming mouse of only 62 grams. The mouse has a precise sensor of up to 16,000 DPI, an extremely flexible cable and five mouse feet made of pure PTFE. The Light² 200 is therefore particularly suitable for PC games and applications that require fast and precise operation.

Lightweight, Durable Construction

The Light² 200 has a honeycomb structure that extends over the sides, the bottom and the top cover of the mouse. This construction reduces the weight of the mouse to 62 grams, making it one of the lightest gaming mice available. In addition, it has five mouse feet made of pure PTFE as well as a flexible, textile braided cable.

Customizable Design

For visual variation, the housing of the Light² 200 has a modular design. The magnetically attached honeycombed top cover can be replaced with an alternative cover that has a closed structure, which makes the mouse only about 3 grams heavier. The mouse also comes with three additional interchangeable DPI buttons, which possess different sizes and colors. Both the scroll wheel and the rear of the mouse are equipped with RGB lighting, which can be altered with choice of various colors and effects.

High Resolution Sensor and Omron Switches

The Light² 200 uses an optical PixArt 3389 sensor with a resolution of up to 16,000 DPI. The DPI can be adapted in seven steps to suit different requirements and situations. The gaming mouse has six programmable buttons, the left and right mouse buttons being equipped with Omron switches for a lifespan of up to 20 million clicks.

Freely Configurable with Software

A variety of further settings for the Light² 200 are possible via the downloadable software found on the Sharkoon website. With this, the button assignments of the mouse can be modified as desired, including macros which can be recorded through the software and then assigned to any button. Furthermore, the lighting, DPI levels and other options are configurable with the software.

Pohlheim, 16 January 2020 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. For the start of the New Year, Sharkoon now introduces four new accessories for gamers. These products are: Sharkoon Backpack, SKILLER SGP2 XXL mouse mat, X-Rest ALU headset stand and the ELITE SHARK WR200 wrist rest.

Sharkoon Backpack

The Sharkoon Backpack is made of high-quality 600D polyester, which is characterized by a high degree of scuff and abrasion resistance. Apart from being robust, the material is water-repellent and easy to clean. And with a volume of 16 liters as well as a variety of compartments and pockets, the backpack offers enough space for notebooks, valuables or simply everything needed for short trips. For mobile devices such as notebooks or tablets, padded compartments are available. These have a Velcro strap to keep the devices securely inside. A hidden pocket on the back panel protects documents and other things from unwanted hands. The pocket on the shoulder strap and the compartment on the top of the backpack both enable easier handling and quicker access to cash or EC cards. There is also a special space for a power bank in the backpack. This can be connected via an integrated extension cable which has a type A USB plug. Thus, smartphones or other compatible devices can be conveniently charged via the USB port on the outside.

Gaming Mouse Mat: SKILLER SGP2 XXL

With a respective length and width of 900 x 400 millimeters, the SKILLER SGP2 XXL offers enough space for all the gaming peripherals. Thanks to the rubber underside, the mouse pad always stays firmly on the table without slipping. In addition, the surface of the mat is ideally protected from abrasion because the graffiti style images have been applied with the process of sublimation printing. Thus, even after heated gaming sessions, the mat will always look as stylish as ever. The stitched edging of the mouse mat also protects from fraying.

Headset Stand: X-Rest ALU

The discreet, yet robust headset stand, the X-Rest ALU, is the perfect companion for gaming headsets. These will not only find a firm and tidy place on the desk, but they will also be presented with style. The X-Rest ALU takes up little space on the desk and can always be placed within easy reach. In addition, the silicone feet ensure a particularly stable stand without slipping. The silicone pad on the top of the bracket also gives the headset a secure hold.

Ergonomic Wrist Rest: ELITE SHARK WR200

The keyboard wrist rest from the ELITE SHARK series raises the arms and thus provides for decreased muscle tension when working and gaming. The wrist rest is covered with easy-to-clean synthetic leather while the inside is made of comfortable memory foam. This adapts optimally to the user after a short time, thus ensuring a comfortable posture. In addition, a non-slip underside provides the necessary hold, even during hectic game situations. The wrist rest measures 478 x 100 x 24 millimeters and therefore suits any standard keyboard which has a standard layout with number pad.

Pohlheim, 12 December 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now introduces two new midi ATX towers: the RGB LIT 100 and RGB LIT 200. These are two strikingly impressive PC cases, which features a tempered glass front and side panel, an addressable RGB fan in the back plus an LED strip at the bottom of the glass side panel. The front of the RGB LIT 100 catches the eye with its circuit-board pattern and the RGB LIT 200 with its pattern of jagged waves. In addition, both cases provide enough space for fans, powerful hardware and up to six SSDs.

Eye-Catching Reflective Front Panel

Both RGB LIT cases benefit from an impressive RGB lighting in the front, which can be flexibly programmed and synchronized with other compatible lighting elements. The front panel itself is made of tempered glass. With the LIT 100, this has a reflective circuit board pattern, while the LIT 200 has a reflective design of jagged waves. Inside the front, there are LED strips that emit an individualized lighting over the entire pattern.

Clever Airflow for Cool Hardware

Behind the conspicuous front panel of each RGB LIT case there is a 120 millimeter fan. This works together with an additional RGB illuminated fan at the back of the case to ensure a constant airflow. Through vents in the front, the necessary fresh air is drawn inward and then transported through to the back of the case. To further emphasize the RGB lighting at the front, the rear fan has been equipped with addressable LEDs. In addition, up to four additional fans can be installed: two in the front and two in the top of the case. However, the installation of water cooling is also no problem for the RGB LIT cases. In the front, a 6.4 centimeter thick radiator including fans will find room, and in the top of the case, 5.5 centimeters space is available.

Stylish and Practical

The RGB LIT cases not only offer an elegant and impressive appearance, but the two models can also convince from the inside. Useful features such as a power supply tunnel, several cable pass-throughs and dust filters behind each air intake all ensure a neat and tidy interior. In addition, enough space is provided to accommodate graphics cards with a length of up to 35 centimeters. There is also enough space available for CPU coolers with a height of up to 15.7 centimeters and a power supply with a maximum length of 21.5 centimeters.

Hardware on Stage

Inside, the RGB lighting caters for a spectacular illumination of the components. This is mainly due to the addressable LED strip at the bottom of the glass side panel, which provides a variety of effects and an illumination across the inside of the housing. Thanks to the tempered glass side panel, the user has an unrestricted view of the inside of the case. The trick: The side panel is attached on the back of the case via barely noticeable thumbscrews.

Sufficient Room for Data Storage

Both cases can accommodate up to six SSDs, which can be mounted behind the mainboard tray or on the power supply tunnel. In addition, there is an HDD/SSD cage within the tunnel, which can either accommodate two more SSDs or two 3.5 inch hard drives.

Pohlheim, 9 December 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now introduces the Mobile DAC and the Mobile DAC PD. These are two audio converters that are compatible with the most popular Android-based mobile devices. Both devices deliver a high-resolution audio amplification of sound output for headsets and headphones which have a TRRS connection, and, in addition, they provide quality voice transmission thanks to an integrated microphone input. Therefore, podcasters and streamers will also benefit from the Mobile DACs.

USB Type-C and Compact Designs

The Mobile DAC and the Mobile DAC PD are each equipped with an up-to-date USB Type-C plug for connecting to compatible Android smartphones and tablets. Output devices which use TRRS plugs can then be operated via the DAC device, while the short cable of the Mobile DAC always ensures an uncomplicated handling. Thanks to their compact design, each of these audio converters can fit into any pocket, providing the opportunity to enhance audio experience and microphone transmission anywhere and everywhere.

Mobile DAC PD: Charge as You Go

Unlike the Mobile DAC, the Mobile DAC PD not only has a TRRS port and a USB Type-C plug, but it also has a USB Type-C port. This offers the function "Power Delivery" and can thus charge the connected device during use with a power supply of up to 60 watts.

Japan Audio Society Confirms High-Quality Audio Experience.

The Japan Audio Society (JAS) has confirmed the high-resolution audio experience of the Mobile DAC and Mobile DAC PD. Both devices provide a sampling frequency of 96 kilohertz at 24 bits and an outstanding signal-to-noise ratio of 100 decibels.

Sound Experience at the Touch of a Button

Both DACs are not only compatible with common headphone remote controls, but each also has a switchable hardware equalizer. Thanks to the presets, the linearly tuned sound can be further individualized. Classic settings with either accentuated bass or accentuated highs can be chosen.

Pohlheim, 14 November 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Now, with the REV200, Sharkoon introduces a real revolution in midi ATX towers. Compared to conventional models, the well thought out construction of the case allows the mainboard to be rotated 90 degrees and the remaining hardware to be installed vertically. This provides an easy and a particularly striking presentation of the components. In addition, the five pre-installed 120-millimeter RGB fans provide the necessary airflow as well as the appropriate illumination to set the scene for the hardware. The cable compartment under the top panel and the multi-functional tunnel on the underside both ensure an especially tidy appearance.

REVolutionary Case Configuration

Thanks to the innovative construction, the PC can now be placed on the left side of the desk without foregoing the view into the inside of the case. To make this possible, Sharkoon has positioned the tempered glass side panel onto the right-hand side of the case. If the desk thus has its left side against the wall, the user still has a view into the case interior. And another positive effect of this configuration is that gamers who have their PCs on top of their desk will have more space to move around the mouse. Moreover, in combination with the glass element and triangular, offset surfaces on the front panel, the case is definitely an eye-catcher.

Clever Airflow

The REV200 comes with three addressable 120-millimeter fans in the front and two identical fans in the back of the case. The graphics card and other components are thereby optimally cooled. The REV200 also has a special feature for the power supply: This can be mounted decoupled in two different directions. In addition, the PC case is especially made for the installation of a water cooling: Not only in the front, but also in the rear of the case is there the possibility to mount a 240-millimeter radiator. And by removing the tunnel cover and one of the two integrated hard drive cages, it is even possible to install a 360-millimeter radiator.

Impressive Illumination

Spectacular RGB lighting is provided by the four pre-installed 120 millimeter fans with multi-layered illumination. These are equipped with encircling addressable LEDs on three levels, producing multi-layered effects. In addition, the case comes with a pre-installed RGB controller for up to eight LED components. This enables color and effect control of the four fans and, if desired, four additional LED components via the synchronization software of compatible mainboards. The mainboards should have connections with 5V-D-coded-G or 5V-D-G pinouts. But also, even if the mainboard has no connection for addressable LEDs, numerous lighting effects can be still be selected. For this purpose, a dedicated button is available on the top of the case.

Tidy Cable Management

For an especially tidy look, the REV200 offers clever ways to conceal the cabling. On the one hand, there are a number of cable pass-throughs within the case, and on the other hand, there is a spacious cable compartment in the top of the case. A magnetic cover on the top panel protects the compartment from dust and dirt and provides the user with quick access. Inside the cable compartment, Sharkoon has also provided a cable clip to neatly bundle and lead the connecting cables out through the back of the case. With two centimeters of space between the mainboard tray and the side panel, there is enough space to neatly store the cables. Here, and within the tunnel in the bottom of the case, the storage media (up to two hard drives and four SSDs) can conveniently disappear.

Inside: Plenty of Room and Protected from Dust

With this revolutionary case layout, no compromises must be made when choosing hardware. The case can hold large graphics cards up to 32.3 centimeters in length, CPU coolers up to 16.5 centimeters in height, and power supplies up to 20 centimeters in length. The radiator in the front can have a maximum thickness of 6.4 centimeters including the fans, while for the radiator in the back of the case, this can be up to 6 centimeters. Thanks to removable dust filters in the front and bottom panels, the hardware is also effectively protected against dust and dirt.

Pohlheim, 06 November 2019 -Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon introduces the SKILLER SGK5, an RGB illuminated rubber dome keyboard for gamers. The keyboard has n-key rollover support, handy multimedia keys and a detachable wrist rest.

Customizable RGB Illumination

The SKILLER SGK5 has an RGB background illumination with six zones and a range of 16.8 million colors. Preconfigured lighting effects are ready to use, and these can be selected, via dedicated keys, even without the use of software. For more personalized effects, a software is available as a free download, which allows the illumination to be modified as desired.

Full Control with N-Key Rollover

Commonly, rubber dome keyboards only have 2-key rollover, whereby a maximum of two keystrokes will be simultaneously registered. However, thanks to the SKILLER SGK5’s n-key rollover, a number of keys can be pressed at the same time, and this will be reliably communicated to the keyboard’s system. In combination with anti-ghosting technology, gamers will never lose control of the game, even when things get hectic.

Wrist Rest for More Comfort

The detachable wrist rest of the SKILLER SGK5 can be magnetically fixed onto the keyboard with ease and provides optimal typing comfort. If the wrist rest is not needed, it can be just as easily removed.

Fast Reacting Rubber Dome Switches

For inputs with an especially quick response, the SKILLER SGK5 is equipped with mid-height, quick-triggering keys with a keycap height of only seven millimeters. The life cycle of the rubber domes amounts to at least ten million keystrokes, and the keyboard can thus be expected to have a long lifespan. If desired, it is also possible to adjust the key response time.

Practical Special Keys for Gaming and Multimedia

In addition, Sharkoon has equipped the keyboard with dedicated keys for lighting effects, macros and game profiles. The keys enable uncomplicated use in everyday situations and while gaming. With two integrated rotary knobs on the top right corner of the keyboard, the volume and illumination brightness can be intuitively adjusted.

Gaming Software for Full Modification

With the free, downloadable gaming software from Sharkoon, not only the illumination but also numerous keyboard functions can be controlled. Macros and multimedia commands can be easily programmed, reassigned and saved in a number of profiles. Adjustments are saved in the onboard memory of the SKILLER SGK5.

Pohlheim, 29. October 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon introduces a new midi ATX tower, the TG6 RGB. This PC case combines the chic look of glass with a spacious interior, where a water-cooling system will find enough room. In addition, the installed components are put perfectly into the scene by the four pre-installed 120 millimeter fans with their multi-layered RGB illumination.

Case Design with Strong Airflow

The four pre-installed 120 millimeter addressable RGB fans provide the necessary airflow. Three of them are in the front of the case and one in the back. Thanks to the new, modular frame design, no screws are visible on the fans. The rubberized contact points and the aerodynamic fan blades provide quiet running and a high rate of airflow. Optionally, three additional 120 millimeter or two 140 millimeter fans can be installed under the top panel. In order to protect the fans and hardware from dust and dirt, the top, bottom and front panels all have removable filters, the top panel filter being attached magnetically.

Radiator Installation Made Easy

With a mounting height of up to 5.2 centimeters, the front of the case provides enough space for the installation of a radiator. The installation of heat exchangers or fans is both innovative and easy thanks to a completely detachable fan tray. With this, a 360 millimeter radiator can be mounted quickly and easily, making the TG6 RGB more than ideal for the installation of water cooling.

Multi-Layered RGB Illumination

Spectacular RGB lighting is provided by the four pre-installed 120 millimeter fans with multi-layered illumination. These are equipped with encircling addressable LEDs on three levels, producing multi-layered effects. In addition, the case comes with a pre-installed RGB controller for up to eight LED components. This enables color and effect control of the four fans and, if desired, four additional LED components via the synchronization software of compatible mainboards. The mainboards should have connections with 5V-D-coded-G or 5V-D-G pinouts. But also, even if the mainboard has no connection for addressable LEDs, numerous lighting effects can be still be selected. For this purpose, a dedicated button is available on the top of the case.

Tempered Glass for the Best View

Not only the side panel, but also the front of the TG6 RGB is made of tempered glass, providing an unhindered view of the installed hardware. Only the power supply, cabling and data storage drives remain hidden in the tunnel or behind the mainboard tray, contributing to a tidy hardware installation. The HDD/SSD cage in the tunnel can also be flexibly positioned thanks to the extra-long slots in the bottom panel to create, for example, more space for a front radiator. For a neat and secure hold, the side panel is attached with thumbscrews to the back of the case. Thus, no screws are visible on the glass itself.

Plenty of Room for Components

The TG6 RGB offers enough space for components such as graphics cards with a length of up to 40 centimeters, a CPU cooler with a height of up to 16.7 centimeters, and power supplies with a maximum length of up to 20.5 centimeters. In addition, up to three 3.5” or four 2.5” drives will find room in the PC case.

Pohlheim, 24 October 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now introduces its new gaming chair, the SKILLER SGS4 Eintracht Frankfurt Sonderedition. The special edition chair supplements the product range which is already available in the design of the traditional sports club of Hesse in Germany. These products are: the Drakonia II gaming mouse, the SKILLER MECH SGK3 mechanical gaming keyboard and the mouse mats of the SGP1 series.

SKILLER SGS4 Eintracht Frankfurt Sonderedition: Ergonomic Comfort with Distinctive Eagle-Design

The SKILLER SGS4 Eintracht Frankfurt Sonderedition is the official gaming chair of the Eintracht Frankfurt eSports Academy. It is thus equipped with all the adjustment options which are necessary for intensive gaming at the level of eSports. Apart from the essential feature of height adjustment, the gaming chair has armrests which are adjustable in four directions, and, in addition, the backrest can be tilted and locked at an angle from 90° to 160°. For heated gaming situations, the chair is also equipped with a tilt mechanism which facilitates the natural movement of the user thanks to its a rocking motion. And, of course, there are the large 75 mm wheels with a lock function. These support the feeling of authenticity when using racing peripherals. The visual highlight is stitched Eagle logo on the backrest as well as the Eintracht Frankfurt lettering on the lumbar cushion.

Already Available: Peripherals and Mouse Mats in Eintracht Style

The following are already available with the Eintracht design: the Drakonia II Eintracht Frankfurt Sonderedition - with 15,000 DPI and RGB illumnation; a matching mouse mat, the SKILLER SGP1 Eintracht Frankfurt Sonderedition, available in sizes L, XL und XXL; and the mechanical keyboard, the SKILLER MECH SGK3 Eintracht Frankfurt Sonderedition, with adjustable RGB illumination and mechanical Kailh switches.

Pohlheim, 15. October 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents a new midi ATX tower, the RGB FLOW. The case catches attention with its minimalistic design, highlighted by the two integrated addressable RGB strips. Enough room is also available inside the case, where up to six fans or, alternatively, correspondingly large radiators can be installed. In addition, Sharkoon ensures various installation possibilities for HDDs and SSDs.

Air FLOW for Optimal Cooling

While the RGB strips on the front and side panels provide a stream of light, the right amount of airflow is provided by the fine mesh grille on the front panel together with the pre-installed 120-millimeter fan. To optimize this, there are four further locations ready for fan installation: a 120 millimeter fan at the front, two under the top panel and one more at the rear of the case. There is still enough space for radiators. A 360 millimeter model with a height of up to 6.4 centimeters will fit behind the front panel, and a 280 millimeter model with a height of up to 5.5 centimeters will fit in the top of the case. Dust filters on the front, top and bottom panels protect the hardware from dust and dirt. All the filters can be easily removed for quick and easy cleaning.

Direct View of Hardware

The tempered glass side panel attaches using two thumbscrews on the back of the case and offers an unimpeded view of the installed hardware. This is showcased even more effectively thanks to the LED strip situated underneath the glass panel.

Addressable LEDs for the Necessary FLOW

The RGB FLOW is equipped on both the front and side with an LED strip. Both strips are daisy-chained and can be connected to the integrated RGB controller. The controller has connections for three additional LED components, and this way, a synchronized lighting with 14 effects can be achieved even without software and a compatible mainboard. The effects are selected using the reset switch of the case. Alternatively, the RGB controller can be connected to a mainboard with a 4- or 3-pin RGB connection (pinout 5V-D-coded-G or V-D-G). This enables the illumination to be integrated into the most common RGB synchronization technology of leading mainboard manufacturers.

Enough Room for Enough Data Storage 

Up to six SSDs have locations on and in the power supply tunnel and behind the mainboard tray. For either SSDs or 3.5” hard drives, an SSD/HDD cage is available alongside the power supply. The cage can be easily moved a few centimeters via the extra-long thumbscrew slots, or it can be completely removed. To preclude unwanted noise from the HDDs, the HDD trays have been provided with rubber contact points.

Compact Yet Roomy Case

Despite the compact design, graphics cards with a length of up to 35 centimeters and CPU coolers with a height of up to 16.5 centimeters will find room. For power supplies, 21.5 centimeters is available in a tunnel, which itself contributes to a tidy and orderly appearance for the installed hardware.

Pohlheim, 19 September 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents the ELBRUS 1 and the ELBRUS 2: two models of comfortable and ergonomic gaming chairs. Each model uses different materials has a different design. For maximum durability, the gaming chairs are made with an integrated steel frame and have a sturdy five-star base.

ELBRUS 1: Tilt Mechanism for More Comfort.

To relieve the back and for more comfort, the ELBRUS 1 is equipped with a tilt mechanism. The pleasant rocking motion provided by this mechanism helps the user to relax during long gaming sessions. The handle for locking and unlocking the tilt mechanism is within easy reach on the underside of the chair.

ELBRUS 2: Adjustable for Personal Needs.

As with the ELBRUS 1, the ELBRUS 2 is also equipped with a tilt mechanism. Moreover, the ELBRUS 2 can be even further adjusted to the requirements of the user. Not only the seat height but also the horizontal angle of the arm rests and the angle of the backrest can be modified. The backrest can be steplessly reclined and locked at an angle between 90° and 160°, offering a comfortable sitting position for any kind of situation.

Padded Armrests to Flip Up or Down.

For maximum freedom of movement when, for example, using racing peripherals, the user can simply flip up the armrests of the ELBRUS 1. No levers or tools are required to do this: the armrests are easily pushed up by hand. However, when folded down, the padding of the armrests contributes to the overall comfort of the chair and provides relaxation for the arms.

Extra Padding for Back and Neck.

While the ELBRUS 1 has extra padding on the armrests, the ELBRUS2 specifically provides this for the head and the lumber area of the back. Here, Sharkoon has included two cushions which have a soft textile cover and can be flexibly fastened onto the chair as required.

ELBRUS 1 with Easy-to-Clean and Breathable Textile Cover.

For comfortable sitting in summer and winter, the ELBRUS 1 is upholstered with a breathable and easily maintained textile cover. At the warmest time of the year, this provides ideal water vapor permeability and dissipation of warmth. In contrast, during the winter, the cover offers immediate warmth and coziness. Cleaning the cover is also uncomplicated as this can be done with a non-fluff cloth and conventional cleaning agents.

Synthetic Leather Cover for ELBRUS 2.

In contrast to the ELBRUS 1, the ELBRUS 2 is upholstered with sturdy synthetic leather. The material is easy to maintain and can impress with a high degree of durability. The colored stitching sets a distinct accent for each color version of the chair.

Maximum Load up to 120 Kg and 150 Kg.

Both gaming chairs are equipped inside with a stable steel frame and are placed on a sturdy five-star base, which, like the frame, is also made of steel. The ELBRUS 1 is made for a maximum load of 120 Kg while the ELBRUS 2 can take up to 150 kg. Both chairs are designed for users with a maximum body height of 190 cm. The five wheels under the five-star base provide a stable hold as well as full freedom of movement. The wheels of the ELBRUS 1 have a diameter of 50 millimeters and those of the ELBRUS 2 have a diameter of 60 millimeters.

Pohlheim, 25 July 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents its new monitor stands, which are available in two versions: the PURE and the POWER. At first glance, both versions appear the same. A closer look, however, reveals their differences in features: The PURE version creates extra storage space available under the monitor, while, in addition to this, the POWER version also offers a USB hub and a wireless charging station.

More Space on the Desk

Both the Monitor Stand PURE and the Monitor Stand POWER support an ergonomic sitting position by raising the screen. In addition, the monitor stands provide extra storage room on top of the desk. Thus, underneath the raised monitor, peripherals will find newly gained space measuring 440 x 190 x 46 millimeters, where keyboards can also find a home.

Wireless Charging with the Monitor Stand POWER

With the Monitor Stand POWER, compatible devices can be conveniently and easily charged using the integrated wireless charging station. This is a contact surface on the top, right-hand side of the monitor stand, where the device is simply placed for charging. The device could be a wireless mouse (like the Sharkoon SKILLER SGM3) or a smartphone, for example. The charging occurs with an output power of five watts maximum.

Steady and Stable Screen Raiser

For a firm and steady hold, both versions of the monitor stand have been made of steel with a thickness of 1.3 millimeters and can therefore support larger devices with a weight of up to 20 kilograms without difficulty. In addition, the nonslip feet on the underside contribute to the overall stability of the monitor stands.

Connections Always within Reach: Monitor Stand POWER

In contrast to the Monitor Stand PURE, up to four USB devices or four flash drives can be plugged into the Monitor Stand POWER for operation. A 100-centimeter-long cable connects the integrated USB hub to a USB 3.0 port on the PC. Having to inconveniently search for available ports on the host computer thus becomes unnecessary.

Pohlheim, 18 July 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents the SKILLER SGM3, its first wireless gaming mouse. In the wireless mode, the mouse is powered by a lithium-ion battery, which can be charged either wirelessly or through a USB cable. Along with the RGB illumination, useful features such as a DPI and battery indication are, of course, included.

Endless Gaming Fun

The SKILLER SGM3 is equipped with an optical sensor which has 6,000 DPI and a polling rate of 1,000 hertz. The default settings for the DPI levels, the mouse speed and the button assignments can all be changed as desired using the high-performance gaming software.

Practical RGB Highlight

The SKILLER logo on the top surface of the SKILLER SGM3 helps the user to keep track of things. The logo not only indicates the currently selected DPI level, but it also shows a warning if the battery charge is low. A specific illumination color for each DPI level can be freely chosen from a spectrum of 16.8 million colors. The DPI levels themselves can also be configurated as desired.

Wireless or Wired

For wireless operation, the SKILLER SGM3 uses 2.4 GHz frequency communication, which is realized via the supplied USB nano receiver. Alternatively, the gaming mouse can be operated through a cable connection. To do this, Sharkoon has also included a textile braided USB cable. Using a switch on the underside of the mouse, either one of the two operating modes can be effortlessly selected.

User-Friendly

Whether for gaming or for work, the SKILLER SGM3 always provides an optimal grip thanks to the rubber surfaces on either side of the mouse. Moreover, the gaming mouse has a total of seven buttons which can all be reassigned with new functions through the gaming software. However, even without the software, all the mouse buttons will be recognized thanks to plug and play.

Hours of Gaming

The SKILLER SGM3 is equipped with a lithium-ion battery which guarantees hours of gaming enjoyment. The battery can be conveniently recharged either wirelessly or even during the game using the included USB cable. Monitor the battery level either in the software or thanks to the illuminated SKILLER logo, which blinks as soon as the battery reaches a critically low level.

Pohlheim, 3 July 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents their latest PC cases, the CA200M and the CA200G, from the new premium series, ELITE SHARK. Both cases stand aside from price-conscious criteria and are dedicated to a presentation of elegance and sophistication as well as extensive room for high-end hardware. Of course, tempered glass side panels and RGB illumination are not forgotten.

ELITE SHARK CA200M: Abundant Room Inside with Optimum Airflow

Next to an elegant side panel made of tempered glass, the CA200M also has a front panel with a fine mesh grille which caters for an enhanced throughput of air. Thus, the PC case not only allows an optimal view into the inside workings of the case, but it also provides the installed components with an ideal airflow. The hinged side panel enables quick and easy access to the inside of the case.

ELITE SHARK CA200G: Pure Elegance

Just like the case version described above, the CA200G also has a hinged side panel made of tempered glass. However, there is just one difference that characterizes this version: instead of a mesh grille, the main element of the CA200G’s front panel is made of glass. Due to its reflective tint, the glass is almost non-translucent and is thus a perfect background for the RGB illumination.

Ample Space for High-End Components

As well as ATX and E-ATX mainboards, graphics cards with a length of up to 42.5 centimeters will also find room in the CA200M and CA200G full towers. In addition, CPU coolers with a height up to 16.5 centimeters and power supplies with a length of up to 24 centimeters have space within the generous dimensions inside the cases. Apart from the complete system cabling, four 3.5 inch hard drives and seven 2.5 inch SSDs can all be installed.

Sophistication in Color

Both PC cases are not only equipped with LED strip lighting on the front panel, but they are also pre-installed with a 120 mm addressable LED fan on the back panel. Via mainboards with headers for addressable LEDs, it is also possible to connect up to six more lighting components. Using the pin configuration 5V-D-coded-G or 5V-D-G, these elements can be illuminated within a range of 16.8 million colors. However, even without this connection on mainboards, the illumination can still be adjusted. This occurs through the integrated RGB controller which allows 20 preset lighting effects to be selected using the case’s dedicated illuminated switch.

Graphics Card Installation: Classic or Vertical

Whichever version of the ELITE SHARK CA200 you choose, there are no limits to the installation of graphics cards. These can be conventionally mounted or even mounted vertically. For classical horizontal installation, a graphics card holder is included as an accessory, which is simply installed with thumbscrews. The holder, with a protective rubber cover, prevents the graphics card from sagging. Two additional expansion slots are available on the case for vertically positioned graphics cards. To install these, a vertical graphics card kit is separately available from Sharkoon.

Optimum Airflow in both Versions

In both the CA200M and the CA200G there are seven locations for fans. In addition, the case will support dual radiator setups: 420 millimeter radiators can be installed in the front of the case, and 360 millimeter heat-exchangers can be placed under the top panel. With a special mount and extra-long installation slots inside the case, Sharkoon has also catered for the easy installation of a reservoir and water-cooling pump. And to avoid dust and dirt from entering the case, every opening for airflow has a removable dust filter.

Pohlheim, 25 June 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents the Gaming DAC Pro S. This is a digital-to-analog converter which transforms a normal headset into a high-performance sound system. To do this, the Gaming DAC Pro S is equipped with a sampling frequency which is certified for high-resolution and a signal-to-noise ratio of 100 decibels.

Captivating Sound with High-Resolution Audio

With the Gaming DAC Pro S, acoustic details can be experienced at their fullest. This is made possible thanks to the high-resolution sampling frequency of 96 kHz at 24 bits and a high output of 2 volts. In addition, the audio converter produces a listening experience for audiophiles through precisely directed ambient sounds. Thus, in gaming, an accurate determination of direction and distance is possible as well as a continually clear voice transmission.

No Software Needed – Just DAC and Play

For the best possible ease of use, no software is needed for the Gaming DAC Pro S. The digital-to-analog converter only has to be connected to a USB port and then a headset or loudspeaker - and for this, a gold-plated port for a TRRS/stereo plug is provided. Those who wish to use android devices are not left out as a separately available OTG adapter can also be used with the Gaming DAC Pro S.

High-Resolution and Certified Sound Quality

To ensure a high sampling frequency and a sound dynamic of studio quality, the Gaming DAC Pro S is certified to fulfil the requirements of the Japan Audio Society (JAS). On the basis of this, the converter ensures a modern and high-resolution audio quality.

Compact and Portable

With the size and format of a common USB flash drive, the Gaming DAC Pro S is easy to transport and always ready for use. On the computer, the digital-to-analog converter takes up no more room than the connection plug of a peripheral device, and yet it will add a significant enhancement to the sound.

Crystal Clear Sound without Interference

Thanks to the excellent signal-to-noise ratio of 100 decibels, the Gaming DAC Pro S can guarantee crystal clear sound. The device offers an alternative to built-in system sound cards and thus avoids background noise which, for example, can emanate from the power supply.

Pohlheim, 06 June 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents the ELBRUS 3. This is a comfortable and ergonomic gaming chair in a design that has taken its inspiration from the world of motor racing. The steel frame inside the chair and the sturdy five-star base both provide a maximum degree of stability.

Ergonomically Adjustable.

The ELBRUS 3 has various adjustment features and so can be easily adapted to the ergonomic requirements of the user. To do this, the chair not only has an adjustable backrest and seat height but has also been provided with fully variable armrests. These can be changed in height, length and to a horizontal angle. The user has thus various possibilities for finding a healthy and comfortable sitting position.

Various Functions for Relaxation

For creative relaxation during breaks, the ELBRUS 3 has been equipped with an adjustable backrest. This can be locked at different angles using an extra-large adjustment handle. The user can recline in a position anywhere between 90° and 160°. While gaming, extra motion is provided by the tilt mechanism, allowing the chair to be rocked. The mechanism can be locked or unlocked via an additional handle on the underside of the chair.

Soft Padding with Synthetic Leather Cover

For long periods of sitting, comfort is provided by the particularly soft padding of the upholstery with its synthetic leather cover. The padding adapts ideally to the body form of the user and, together with the raised sides of the seat base, ensures a feeling of comfort. Extra room for the legs is found on the larger than usual seat base.

Maximum Load up to 150 Kilograms.

The ELBRUS 3 is certified for safety and stability up to a weight of 150 kilograms. This is ensured with the sturdy five-star base and the stable steel frame construction. The class-4 gas lift piston enhances the entire stability of the ELBRUS 3. In addition, the gaming chair is suitable for users with a body size of up to 190 centimeters.

Unrestricted Movement.

The five wheels of the gaming chair have a diameter of 60 millimeters and are especially designed for interior floors and allow unrestricted mobility on even surfaces.

Pohlheim, 02. April 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals, offering performance at a reasonable price. Sharkoon now presents the SKILLER SGD1. This is a robust gaming and work desk with ergonomic features and a modern gaming design. The integrated cable management system ensures tidy cabling for the connected peripherals and hardware.

Ergonomic Tabletop

To support prolonged gaming and work sessions which are free of fatigue, Sharkoon has provided the tabletop with chamfered edges. With this ergonomic feature, wrists and hands can be comfortably rested. In addition, the projected sides of the desk serve as rests for the elbows.

Modern SKILLER Design for Gamers

With the base-black of the tabletop and the contrasting blue and black of the legs, the gaming desk offers the perfect platform for matching peripherals from the SKILLER series. The sportive design of the SKILLER SGD1 makes it more than suitable for style-conscious gamers.

Stable thanks to Solid Materials

The four legs of the SKILLER SGD1 are made of robust steel and offer a high degree of stability thanks to their special triangular configuration. In addition, the feet can be adjusted in height to help achieve the perfect seating height or to compensate for any unevenness of the floor.

Cable Management System for More Tidiness

More tidiness on the gaming desk is ensured by the integrated cable management system on the underside of the tabletop. Cables can be laid neatly behind the recess at the back of the desk and led into the cable management system. This can be flexibly installed, as desired, in one of two directions.

Availability

The SKILLER SGD1 gaming desk is now available.

Pohlheim, 19 March 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon now presents the WPM Gold ZERO. This is an 80 PLUS Gold certified power supply unit using current technology and manufactured with high-quality components. In addition, tidy installation within the PC housing is made possible thanks to the semi-modular configuration of the cable connections.

Certified Efficiency

Due to an efficiency of up to 90 percent, the WPM Gold ZERO has been certified with 80 PLUS Gold. This certification verifies the promised optimization of energy usage and provides assurance that the device will save on electrical power.

Stable Voltage with Modern LLC Technology

With the WPM Gold ZERO, Sharkoon relies on state-of-the-art technology including superior LLC resonant converters. These ensure low switching losses and thus enable a higher efficiency. Through the power supply’s technological design and its use of premium components, noise and heat levels are reduced to a minimum.

ZERO RPM Function for a Silent Operation

In addition to high-quality components, Sharkoon has equipped the device with the ZERO RPM function. As the name of this function implies, this suspends the rotation of the power supply’s fan at low to moderate loads to enable a silent operation. If cooling is then later required by the system, the fan rotation is re-activated.

RYZEN Compatible and Semi-Modular

The semi-modular design enables the tidy and uncomplicated installation of the power supply, and the cables can be selected and installed according to the needs of the user. The exceptions to this are the cables for the ATX and the 4+4-pin CPU connections. The CPU cable supplies optimal power also to high-performance systems. Even PCs with AMD RYZEN processors can be operated without any additional adapters via one of the two PCIe / CPU sockets, which can also be used for connecting to graphics cards.

Price and Availability

The power supply WPM Gold ZERO from Sharkoon is now available in three classes of performance.

Pohlheim, 5. March 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon will be supporting the German Bundesliga and sports club Eintracht Frankfurt with the foundation and establishment of an eSport academy. This also includes sponsoring in the form of hardware. The existing EA Sports FIFA team has already been equipped with gaming peripherals and gaming chairs to realize an ideal basis for the players. In addition, the future League of Legends eSport Team will be receiving the right equipment for its start.

A Common Approach

The technology company based in Pohlheim in the German state of Hesse feels connected to the traditional Frankfurt club not only because of the common residency in the region, but also because of the integral approach to the training and promotion of local talents: from courses for all young aspirants, right up to the promotion of top players. In this sense, Eintracht Frankfurt stands for a sustainable basis of (club) community, passion and ability. These are elements which also characterize Sharkoon Technologies and which have made it one of the leading manufacturers of gaming peripherals and computer accessories over the past 15 years, from the beginnings as a local supplier of PC case modifications.

Performance in Focus

For the start of the virtual national league, Sharkoon has already equipped the two EA Sports FIFA players, Maik "Sn0wGoogles" Kubitzki and Marko "Makibest" Mihaljevi, with the SKILLER SGS4 gaming chairs. These award-winning bestsellers were especially designed for use in eSports. In addition to comfortable covers made of synthetic leather, their development focused on the performance of the players. The gaming chairs are therefore fully adjustable to the needs of the players, including the seat height, the armrests and the backrest. In addition to the gaming chairs, it is planned to provide the League of Legends Team with mouse pads, keyboards, mice and headsets from the manufacturer's high-performance range.

“With Sharkoon, we have found a local partner who already has expertise in eSports and who can provide us with the ideal foundation for our players. These will be exciting times for us - and we are looking forward to that," said Timm Jäger, Advisor to the Executive Board at Eintracht Frankfurt Fußball AG. Andrei Lyamin, Director of Product Development & Marketing at Sharkoon Technologies, commented: "The cooperation with Eintracht Frankfurt eSports is a big win for both sides: Eintracht has the talents and we have the right know-how and equipment. We are looking forward to future.”

Pohlheim, 28. February 2019 - Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon introduces its new ATX midi tower: the VG7-W. This PC case combines an expressive appearance with the ideal intake of air, and despite the compact dimensions, no-one should have to make great compromises when choosing the hardware for their new system. This is thanks to a structured and roomy design inside the case provided by the manufacturer.

Acrylic Side Panel Window and Illuminated Fans

The side panel of the VG7-W has a large acrylic window offering a clear view of the case interior. In contrast, the front panel offers a sporty, modern appearance combined with a good airflow supported by the air-permeable mesh grille, behind which are two pre-installed 120 mm LED fans. The rear panel has another pre-installed fan to provide a constant throughput of air. Versions are available with blue, red or green illumination. A version with RGB illumination is also available.

Addressable LEDs in the RGB Version

The three fans inside the RGB version of the VG7-W are equipped with addressable RGB LEDs to synchronize illumination effects with other components via compatible mainboards (pin configuration: 5V-D-coded-G or 5V-D-G). If the mainboard does not have the appropriate header, fourteen different lighting effects can be selected via the reset switch of the case.

Removable Dust Filters and Plenty of Space for Hardware

To protect the hardware from deposits of dust, Sharkoon has incorporated dust filters covering areas of air-intake. These can be removed for easy cleaning. Despite the compact size of the case, no considerable sacrifices have to be made when configurating the hardware system. Inside, there is enough space for graphics cards with a length of up to 37.5 cm, as well as up to four SSDs, up to three HDDs and an optical drive.

Linden, 31 January 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon introduces their new ATX midi tower series: VG6-W. This PC case series is designed for budget-conscious users with air-cooled systems. The VG6-W is equipped with either three single-color illuminated LED fans or three RGB illuminated fans as well as a striking exterior plus acrylic front and side windows.

Conspicuous Looks

The front panel of the VG6-W should especially appeal to gamers, which gives the case a unique retro-futuristic finish. The eye-like LEDs above on the front panel lend an expressive character. The angular acrylic window underneath brings the pre-installed LED fans to the fore.

Hardware on Show

The side panel of the Sharkoon VG6-W has a large acrylic window to present the built-in components of the system. All possible modifications inside the case can be optimally presented.

Compact Inside

This ATX midi tower may, at first, appear to be quite compact; but here, hardware compatibility does not have to be compromised. The interior easily incorporates mainboards up to the ATX standard, and up to four SSDs, up to three HDDs and an optical drive (5.25").

Optimal Airflow – Pre-Installed

The VG6-W comes already equipped with three 120 millimeter case fans: two at the front and one at the back. The PC case is available in four different versions: Three versions feature single-color illuminated fans with either red, green or blue lighting. Another version has illuminated fans with RGB functionality. These RGB fans each have nine addressable LEDs which can be connected to the mainboard (pin configuration 5V-D-coded-G or 5V-D-G). If the mainboard does not provide compatible lighting control, the reset switch can be used to select a total of 14 lighting effects.

Linden, 16 January 2019 – Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon presents the SilentStorm Cool Zero. This is an 80 PLUS Gold certified PC power supply with modern and superior components. Its high-quality features enable an efficient power supply and adjustable cooling.

80 PLUS Gold Certification

The SilentStorm Cool Zero has been certified 80 PLUS Gold for its efficiency of up to 92 percent at 230 volts. This verifies that the power supply unit operates cost-effectively and is ideal for energy-conscious users.

Reliable and Stable due to High- Quality Components

Sharkoon has equipped the power supply with exclusively Japanese capacitors rated at 105 degrees Celsius and a 135 millimeter fan with a fluid dynamic bearing. The latter ensures a particularly quiet and reliable operation with an average lifespan of up to 100,000 hours.

Highly Adaptable Cooling Behavior: “Fan Delay“ & “Zero RPM“

There are two switches on the back of the power supply that each activate one of two different fan functions. In the Fan Delay mode, the power supply fan continues to run for 60 seconds after shutting down. This avoids hot spots, removes remaining waste heat, and ensures complete system cooling. The Zero RPM mode fully stops fan rotation at low to medium load to enable a silent operation. When the Zero RPM mode is disabled, the fan constantly provides airflow at a low rotational speed, thus providing continuous cooling.

Stability and Longevity with Comprehensive Protection Features

In addition to high-quality capacitors, Sharkoon relies on state-of-the-art LLC resonant converter technology. This allows the SilentStorm Cool Zero to deliver a consistent and reliable voltage with high efficiency.

Of course, the power supply is equipped with all standard protection functions. Thus, it is armed against over current, over and under voltage, short circuits, overheating and overload.

Fully Modular and RYZEN Compatible

Because of the fully modular cable system, only those cables on the power supply are used which are actually needed when connecting the hardware and peripherals. The entire wiring and the interior of the PC case thus remain tidy, and the air flow is not hindered by unnecessary cables. In addition, sockets for two 4+4-pin CPU connectors ensure 100% compatibility with AMD RYZEN mainboards

Availability

The Sharkoon SilentStorm Cool Zero power supply is now available in three classes of performance.

Linden, 13 December 2018 – Sharkoon Technologies is an international supplier of PC components and peripherals which boasts performance at a reasonable price. Sharkoon now introduces the successor to its popular gaming mouse, the Drakonia. The new Drakonia II is again presented with a distinctive dragon-scale design and pleasant ergonomic form. The mouse also features a high performance optical sensor from PixArt as well as numerous programmable buttons.

Precise Sensor and Adjustable Weight

The Sharkoon Drakonia II is equipped with an optical PixArt 3360 sensor, offering a maximum of 15,000 DPI, and provides the user with six customizable DPI levels. The white illuminated DPI indicator has the essential function of signaling which level is currently selected. For further precision and a more individualized operation, the Drakonia II has an internal weight tuning system consisting of five weights, each weighing 5.6 grams, adjusting the weight by up to 28 grams in total.

Equipped for Everything Thanks to Twelve Programmable Buttons

The Drakonia II offers twelve programmable buttons, which will be particularly interesting for MMO gamers, as these can be assigned with regularly used functions. Additionally, the two thumb buttons of the predecessor model have now been upgraded to a total of six buttons. For greater durability, the left and the right mouse buttons have been equipped with robust Omron switches.

Dragon Design with RGB Illumination

The Drakonia II comes with an eye-catching dragon-scale design and is available in either green or black. The thumb button, the scroll wheel and the Drakonia logo are all supported with RGB illumination. A secure grip is ensured thanks to the texturized thumb rests found on each side of the mouse.

Wide-Ranging Gaming Software

To make the Drakonia II ready for the next battle, the Sharkoon has combined the gaming mouse with a high performing software. When using this, the DPI levels can be set and buttons can be assigned with macros and a multitude of other functions. Moreover, the software enables the customization of the colors and lighting effects. The gaming software is available as a free download from the Sharkoon website.

The Sharkoon Drakonia II is now available for retail as a green or black version.

Linden, November 2018. Sharkoon Technologies is an international supplier of PC components and peripherals which boast performance at a reasonable price. Sharkoon now presents the TG4, a more compact case version of the TG5. In addition, the manufacturer has added an RGB lit midi tower with addressable fans to its SKILLER SGC1 series. The latter model now also features a tempered glass side panel instead of acrylic. The TG4 is also comes with addressable RGB fans, but models are also available with single color fans.

Sharkoon TG4: Compact Case for Price-Conscious Gamers

The Sharkoon TG4 is more compact than the highly acclaimed and proven TG5. When developing this ATX midi tower, the focus was on a compact format with small dimensions, so unnecessary features such as mounting bays for optical drives were deliberately avoided. However, there are no major limitations to the hardware which can be used: When it comes to mainboards, mini-ITX and (micro-)ATX models can be easily mounted. The graphics card and the power supply unit can be a maximum of 37.5 and 26.5 centimeters respectively. The CPU cooler should not exceed a height of 16 centimeters. There is also room for two 3.5 inch and four 2.5 inch drives. This makes the TG4 ideal for air-cooled systems.

Modern Optics Thanks to Glass and RGB

Just like its predecessor, the TG4 has a tempered glass front and side panel, which not only provides an elegant design, but also provides a generous view of the components. The TG4 is also equipped with four pre-installed and illuminated 120 millimeter fans. Three of them are located in the front and one in the rear, which guarantees an efficient air flow.

For the lighting, the buyer has a choice of three variants, either with red, blue or RGB illuminated fans. The latter are addressable models that can be connected to an integrated 4-port RGB controller. This controller can be connected to a 3-pin connector for addressable RGB LEDs on the mainboard so that colors and effects can synchronize with the other components. Alternatively, the lighting can also be controlled manually. In this mode, 14 lighting effects are available, which can be switched through via the reset button on the case. The illumination can also be completely deactivated.

Sharkoon SKILLER SGC1 RGB Completes the Product Range

With the Sharkoon SKILLER SGC1 RGB, the manufacturer has added a version with two addressable 120 millimeter RGB LED fans and a side panel made of tempered glass to its range of cases of the same name. The models currently available are equipped with single-color fans and an acrylic side window. The new version also has a 4-port RGB controller that can be connected to the mainboard to synchronize the lighting effects with the rest of the hardware. Like the TG4, it is also possible to select the 14 lighting effects via the reset button or to switch off the illumination completely.

The Usual Wide Range of Features

Otherwise, the virtues of the SKILLER SGC1 series are of course retained. This also includes the numerous installation options: for example, mounting mainboards in mini-ITX, micro-ATX and ATX standards is no problem. It is also possible to integrate CPU coolers up to a height of 15.3 centimeters as well as graphics cards with a length of 40 centimeters and power supply units with a length of 24 centimeters. In addition, two 5.25 inch installation bays are available in which, for example, optical drives can be tool-free installed. Alternatively, 3.5 inch hard drives can also be installed. But if more space is needed, the bays can also be completely dismantled.

In the underside of the case there is a tunnel that covers the power supply and the hard drive cage, thus ensuring a tidy appearance. The cage can be moved to a certain extent and it allows the installation of two HDDs. The hard drives are decoupled from the cage by suitable rubber coatings. Sharkoon has put a cut out in the cover towards the front in order to create space for the installation of water cooling radiators; and thanks to practical extra-long slots, different sizes can be flexibly installed in the bottom and the top of the case. Numerous cable pass-throughs also allow the cables to be laid neatly. In addition, the interior is protected by removable dust filters on the front, top and bottom.

Prices and Availability

All three versions of the Sharkoon TG4 are now available. The Sharkoon SKILLER SGC1 RGB is also available now.

Linden, 21 November 2018. Sharkoon Technologies is an international supplier of PC components und peripherals which boast performance at a reasonable price. Sharkoon has now expanded their popular 1337 RGB mouse mat series with additional sizes. As before, the gaming mats offer perfect gliding properties and a nonslip base. In addition, the mouse mat has a cable guide, keeping the connecting cables tidily out of the way.

Sharkoon 1337 RGB with a robust soft surface.

The mouse mats of the 1337 RGB series possess a resilient textile surface for long durability. This has been manufactured in a way that always allows the mouse to effortlessly glide without resistance. To prevent the mouse from slipping even during heated battles, Sharkoon has again relied on a rubberized underside. What’s new, though, is the RGB illumination, which is integrated in the border of the mat. And to enable the lighting to fully come to its visible effect, the manufacturer has used a transparent nylon thread for attaching the LED strip to the mat.

Easy Use and Lighting Effects.

The colors of the illumination can be selected from a specific RGB spectrum. In addition, three different lighting modes are provided, which can be selected and adjusted by the touch of a button on the controller of the 1337 RGB mouse mat. Due to its height of only 9 mm, the controller unit remains unobtrusive even when a wide field for maneuver is needed. Sharkoon has also integrated a practical mouse cable guide for more convenience while gaming.

Various Sizes for Every Kind of Gamer.

All the gaming mouse mats of the 1337 RGB series are only 3 mm thick and thus maintain a low profile. Differences only occur when it comes to the surface size: The already available 1337 RGB measures 359 x 279 mm and is thus the ideal choice for most users. Whoever needs more space, can reach for the 1337 RGB XL, which amounts to 450 x 380 mm. And for those who also want to place their keyboard on the mousepad, the 1337 RGB XXL is available. This version measures a proud 905 x 425 mm and enables an unhindered use of the mouse.

The new bigger gaming mats of the 1337 RGB series are now available.

Linden, 29 October 2018 – Sharkoon Technologies is an international supplier of PC components und peripherals which boast performance at a reasonable price. Sharkoon now presents its latest gaming mouse: the SKILLER SGM2. The mouse concentrates on essential virtues and avoids any unnecessary extras. The result is a straightforward, ergonomic peripheral device for right-handers with plug and play installation and an optical sensor capable of 6,400 DPI – at a very competitive price.

Comfortable Use Thanks to Proven Design

The SKILLER SGM2 is well suited for right-handers due to its ergonomic form and always offers a comfortable grip thanks to the carefully chosen materials in its manufacture. The rubberized sides and its form allow the mouse to fit comfortably in hand with nearly any style of grip. Extra convenience is provided by the easily accessible thumb buttons which possess a clearly felt pressure point.

Optical Sensor with 6,400 DPI

The inside of the SKILLER SGM2 also has something to offer due to its optical sensor with a maximum DPI of 6,400. There are four steps to choose from: 400, 1,200, 3,200 and 6,400 DPI. This, in combination with a 1,000 Hertz polling rate, should always ensure precise input and maneuvers. Using the DPI switch, the resolution of the sensor can be quickly selected even during the game. The illuminated SKILLER logo serves as an indicator - with a different color for each chosen DPI level. Any complex software has been consciously avoided, resulting in mouse which can be put into use quickly and easily.

Effective RGB Illumination

The SKILLER SGM2 gaming mouse catches the eye with its classic yet colorful design: The uncomplicated appearance in black is set off by an RGB contour stripe and the lit SKILLER logo. Using the switch on the underside of the mouse, six lighting modes can be selected. If no illumination is desired, the LEDs can be completely deactivated.

The Sharkoon SKILLER SGM2 gaming mouse is now available.

Linden, 22 October 2018 – Sharkoon Technologies, is a globally active supplier of PC components and peripherals which boast performance at an affordable price. The Sharkoon brand has now expanded its range of gaming chairs and introduces the SKILLER SGS5: a premium model with an upholstery cover in real leather.

High Quality Cover Made of Real Leather

The Sharkoon SKILLER SGS5 makes its debut in the color black and offers an upholstery cover in real leather. Due to the characteristics of this breathable material, such as creases, grain and natural blemishes, the SKILLER SGS5 not only makes an especially welcoming appearance of high quality but also offers top-class comfort.

Flexible Head and Lumbar Cushions included

If needed, the included cushions can be easily attached and flexibly positioned, resting the neck and spine - which is especially important for long gaming sessions. The textile cushion covers can be easily removed and washed at 30 degrees.

High Degree of Comfort and Durable Framework

The Sharkoon SKILLER SGS5 possesses the same generous dimensions and comfort features as the SGS4: The maximum load still amounts to 150 kilograms due to fact that this new model also has a robust framework made of steel. The recommended maximum body size of the user is 200 cm, made possible by the large seating surface and wide backrest.

Aluminum Five-Star Base and Wheels with Locks

The solid five-star base, made of aluminum, and the extra-large 75 mm wheels provide additional stability. The wheels should guarantee mobility on all even floor surfaces and give a secure hold thanks to the practical lock function. Above all, racing game enthusiasts, who immerse themselves in games using racing wheels, will find this feature as a decisive advantage: Thanks to the brakes, the chair will not roll back when the pedals are pushed down.

Comfortable Padding and 4D Armrests.

Best seating comfort is promised by a supportive foam padding– with a quoted density of 70 kg/m3 - on the seat and backrest. An ergonomic sitting posture is assisted by the 4D armrests. These can be adjusted for the desired height, width and armlength. They can also be adjusted at a horizontal angle. The stable class 4 gas lift piston provides the optimal seating height. For relaxing, even during the game, the suspension supported rock function can be applied, and, using the tilt angle lock, the chair can be locked at stepped angles from 0 to 14 degrees. For prolonged gaming breaks, the backrest can be reclined and fixed at an angle from 90 to 160 degrees.

The Sharkoon SKILLER SGS5 Gaming Seat is now available.

Linden, 15th October 2018 – With the PURE STEEL, Sharkoon Technologies introduces an ATX midi tower which puts individual creativity into the foreground. The spacious case catches the eye with its minimalist steel body and almost frameless side panel made of tempered glass. In combination with a power supply tunnel which is situated in the top of the case, the side panel should provide an optimal view of the individualized hardware configuration – including the illuminated fan of the power supply. The blank and inconspicuous front panel can thus become the actual side panel. The case would therefore be appropriate as a hardware showroom to be placed on the table top. Those wishing to put a special frame around their hardware can do so using the steel chassis - with its black or white foundation - as a blank canvass for various modding ideas.

For a worthwhile display of the hardware, the PURE STEEL should also be able to incorporate demanding components such as mainboards with dual or multi-processors, CPU coolers with a maximum height of 16 cm as well as graphic cards with a maximum length of 42 cm. A rubberized support is also pre-installed which prevents any sagging of the graphics card.

The PURE STEEL has a pre-installed 120 mm fan at the back and another on the bottom panel. If the HDD/SSD mounting cover is removed from the side panel, up to six 120 mm fans can be installed. The case has extra-long slots for water cooling compatibility. The bottom of the case has sufficient space for a 360 mm radiator.

The PURE STEEL is also available as an RGB version with a black chassis. This version comes with a total of four pre-installed RGB fans all with addressable LEDs. Three fans are situated on the bottom panel and one at the back. The case has a controller for the RGB fans, and this can be used as a hub, connecting compatible mainboards with up to eight addressable RGB components. The illumination is then controlled via the mainboard software. Alternatively, for mainboards without a connection for addressable RGB, the LED components can be manually controlled using the reset switch on top of the case to select fourteen pre-set lighting effects.

The PURE STEEL is now available in a black, white and RGB version.

Linden, 30 August 2018 – Sharkoon Technologies is celebrating their 15th anniversary with a case especially made for high-end gaming hardware. The NIGHT SHARK ATX Midi Tower is the largest chassis PC case launched so far by Sharkoon. It is able to incorporate larger dual and multi-processor mainboards, graphic cards with a maximum length of 42 cm plus CPU coolers with a maximum height of 16 cm. The installed components can be clearly seen through the side panel and the case front window, both made of tempered glass. To maximize the view of all components, Sharkoon has turned its usual interior configuration on its head by placing the power supply tunnel in the top of the case. Thus, not only does the power supply fan become more visible, but also the view of all the other components are enhanced.

The NIGHT SHARK is optimized for liquid cooling. The removable HDD/SDD mounting plate in the inner side panel has special extra-long slots for the easy installation of liquid cooling reservoirs. A 240 mm or a 280 mm radiator can fit comfortably on the case front, and a 360 mm radiator can be installed on the bottom panel. A total of eight 120 mm fans, with removed HDD/SDD mounting plate, can be installed for those who prefer “classic” cooling. Instead of two 120 mm fans, two 140 mm fans can be mounted in the front of the case.

For a personalized airflow, the case is available in four different versions. The NIGHT SHARK Lite comes completely without any fans. The NIGHT SHARK Blue and the NIGHT SHARK Red have two pre-installed 120-mm LED fans in blue or red behind the front panel as well as a 120 mm blue or red LED fan on the back of the case. The NIGHT SHARK RGB also has three pre-installed 120 mm fans, two at the front and one at the back, each with addressable LED RGB rings. For controlling the LED fans, the NIGHT SHARK RGB has a pre-installed RGB hub on board. This can be used either with the mainboard software and digital RGB controller or manually via the reset button on top of the case. With older mainboards, the manual control allows the user to choose from fourteen preset lighting effects. Control via the mainboard software allows for an illumination within a range of 16.8 million colors.

The Sharkoon NIGHT SHARK is now available in a Lite version. Also available are the NIGHT SHARK Blue version and Red version and the NIGHT SHARK RGB.

Sharkoon has extended its range of gaming keyboards and introduces the SKILLER SGK4: a rubber dome keyboard with real n-key rollover support and segmented RGB background illumination, which can be adjusted within six zones. Different colors and lighting effects can be selected using the four dedicated illumination keys. The illumination can also be customized via the SGK4 software for Windows - whether for effects, frequency, direction, color or brightness.

Within the software, individual keys can be reassigned with new commands or with configurable macros. In addition, key response times, the behavior of the Windows key, and the polling rate (up to 1,000 Hz) are also customizable. All modifications can be saved in the keyboard memory in any one of four game profiles. The profiles can also be selected, via dedicated keys, during the game. Additional game profiles can be saved on the PC and, through the software, can then be loaded and stored in the onboard memory of the keyboard.

To enable quick access, the SKILLER SGK4 also features a total of twelve function keys with preset multimedia actions. In combination with the SKILLER key, these will perform actions such as starting the media player or adjusting the volume. Other combinations with the SKILLER key can, for example, lock all the keys of the keyboard or virtually swap the arrow and WASD keys.

To help prevent fatigued hands and wrists after long gaming sessions, the 3-block, classically designed keyboard comes with an integrated palm rest. The keyboard connects via a 180 cm long textile braided cable with a gold-plated USB connector.

The Sharkoon SKILLER SGK4 illuminated Gaming Keyboard is now available.

With the SKILLER SGH3, Sharkoon introduces the most versatile stereo headset of the SKILLER series. The Hi-Fi capable 53 mm drivers promise a forceful sound which can be adjusted according to personal preferences via the external USB sound card. The sound card incorporates a hardware equalizer and is supplied with the headset. The straightforward design, detachable microphone and modular cable connections should also make the headset attractive for mobile use.

The Sharkoon SKILLER SGH3 stereo gaming headset presents a design in matt black which aims to be both classic and modern. The typical characteristics of the SKILLER series can be found via the glossy black logo on the ear pads and the design of the metal head frame, which is presented in the color dark titanium. The circumaural form and generous padding of the ear pads should both effectively dampen ambient noise and provide comfortable wear of the headset. In addition, the padded headband can adjust to the user’s head thanks to its flexibility and spring-loaded suspension. This should guarantee both stability and optimal comfort.

With its 53 mm drivers, the SKILLER SGH3 aims to impress with a sound in which bass has the emphasis. If other tones are desired, the sound can be modified at any time using the external USB sound card with its hardware equalizer. The sound card provides a choice of modes with different highs and lows as well as virtual surround effects. The device can be controlled manually without software. Alternatively, with software, three virtual surround modes can be activated, balanced for music, gaming or film. For voice chats, the SKILLER SGH3 has a flexible omnidirectional microphone with pop filter. The microphone can be easily detached, allowing for the mobile use as headphones.

The SKILLER SGH3 is connected via the integrated cable, with its TRRS stereo jack, to smartphones, PS4 and the Xbox One Controller as well as notebooks and ultrabooks. The cable has a length of 110 cm for mobile use. The included extension gives a total cable length of 260 cm and has two stereo jacks, enabling the headset to be used with conventional PCs. Both the inline controller, which is integrated in the extension cable, and the external USB sound card provide both volume control and microphone mute. The external USB sound card can be connected to the headset either via a single 3.5mm TRRS cable or via two 3.5mm stereo jacks for microphone and headphones.

The Sharkoon SKILLER SGH3 stereo gaming headset, with included USB sound card, is now available.

In conjunction with the continuing RGB trend, Sharkoon introduces the Pacelight RGB Illumination Set. The set provides the fundamentals for the customized illumination of PC cases. The center-piece of the set is the Pacelight P1 RGB LED controller, which allows the control of up to eight LED components in up to 16.8 million colors. Likewise, up to four fans (with three-pin mainboard connectors) can be controlled via the intuitive software. In addition to the controller, the set gets you started with two included Pacelight F1 120 mm RGB fans and two Pacelight S1 RGB LED light strips.

The Pacelight P1 RGB LED controller is connected to the power supply unit via a SATA power cable and plugged to the mainboard via a nine-pin USB connector. Up to eight LED components with 12 V GRB connections and up to four fans (with three-pin connectors) can then be connected and controlled. For installation inside the case, the P1 has a protective silicon underlay with an adhesive surface. Alternatively, the controller can be attached with cable ties using the provided slots.

The connected fans and strips are controlled using the corresponding software. With this, the LED components can be separately customized within the full RGB spectrum and be individually provided with switchable lighting effects. In addition, the illumination can be set to automatically change according to the day of the week or to the currently active program. It can also be set to dim at a chosen time of the day. Connected fans can be easily checked for compatibility and can be adjusted within the full rpm range. A customized illumination can also be set to indicate a fan failure, should this occur.

The Pacelight F1 RGB fans were especially developed for the P1 and promise a maximum airflow of 93.22 m3/h at 23 dB(A) and 1,400 rpm. Six LEDs in the center should provide an even lighting also at full speed. The Pacelight S1 RGB LED strips each have 18 splash-proof 5050 RGB LEDs along a length of 360 mm. Because of their flexibility and width of just 10 mm, the strips can also find a hold in narrow spaces – either magnetically or by using the adhesive surface.

The Sharkoon Pacelight RGB illumination set – including the Pacelight P1 RGB LED controller, two Pacelight F1 120 mm RGB fans as well as two Pacelight S1 RGB LED strips - is now available. The Pacelight RGB fan F1 as well as the Pacelight RGB LED strip S1 are also available separately.

Sharkoon has broadened its range of gaming seats and introduces, with the SKILLER SGS4, a model that not only has the convenient functions of the SKILLER SGS3 but also offers expanded seating comfort. An improved steel frame construction is the basis of a 150 kg load capacity. Thanks to an enlarged seat cushion and backrest, the manufacturer recommends a maximum user height of 200 cm.

The Sharkoon SKILLER SGS4 has been kept in a black look. However, versions with color accents in red, green or blue are also available as well as a version in black and white. The supplied head and lumbar cushions match the color accents of the seats. The cushions can be easily attached and support the neck and spine during longer gaming sessions. The textile covers of the cushions can be simply removed and washed at 30° C.

Due to the enlarged seat cushion and backrest, more sizeable seating comfort can be offered compared to previous models. The required stability has been achieved by means of the improved steel frame construction with a consistent diameter of 22 mm. Additional stability is provided by the solid five-star base made of aluminium as well as the extra-large 75 mm wheels. These guarantee mobility on all even floors and can be blocked using the practical wheel locks.

Seating comfort is provided by a supportive foam padding (with a density specified at 70kg/ m3) in the seat cushion and backrest. In addition, the synthetic leather in these areas is perforated and breathable. An ergonomic seating posture is supported by the 4D armrests, which can be adjusted for any arm length, to the desired height or width, or to a specific horizontal angle. The stable Class-4 gas lift piston provides the optimum seat height. For relaxation, even during the game, the advanced suspension and tilt control system can be used. This allows the seat to be tilted and rocked, which, using the tilt angle lock, can be locked into a position from 0° to 14°. During extended breaks, the backrest invites the gamer to relax at a wide lockable angle between 90° and 160°.

The Sharkoon SKILLER SGS4 gaming seat is now available in five color versions.

Sharkoon widens its range of low profile keyboards, and, with the PureWriter RGB and the PureWriter TKL RGB, introduces two versions with stepless adjustable RGB illumination. Both versions – with or without number block – benefit from additional function keys with preset multimedia actions. Following from the previous PureWriter models without RGB, Sharkoon is continuing with the mechanical switches from the Kailh manufacture. Both RGB Keyboards are available with either red or blue switches.

With the Purewriter RGB and the Purewriter RGB TKL, Sharkoon has put its low-profile keyboards with stepless adjustable RGB illumination into a new light. Apart from preprogrammed lighting effects and preset lighting profiles, there is also a mode which offers an individualized choice of colors from the whole RGB spectrum. The chosen illumination can be programmed on-the-fly and saved in profiles. All settings are made directly on the keyboard and software is not needed.

The keyboard version with the number block has separate multimedia keys for volume control, or for launching the preferred email program. In addition, this and the TKL version both have function keys with preset multimedia actions, which, for example, can be used for controlling the media player.

The puristic aluminium surface remains the same, as does the frameless compact design – measuring 436 mm in length (355 mm for the version without number block) and 127 mm in width. Thanks to n-key rollover, anti-ghosting keys, a polling rate of 1,000 Hz as well as a choice of mechanical switches, the keyboards have not only been made for office use. The blue switches have an acoustic, tactile feedback with a detectable switching point; the red switches could be of interest to gamers as these have a linear characteristic and an undetectable switching and click point. Both keyboard versions have flat keycaps with a height of 6.2 mm and a lifecycle of at least 50 million key strokes.

The PureWriter RGB and the Purewriter TKL RGB connect using one of the supplied USB cables, which each a have a gold-plated micro B plug and a type A plug. The shorter cable has a length of 50 cm, which is ideal for connecting to notebooks. The longer 150 cm cable is suitable for use with conventional PCs. The keyboards are also compatible with Android devices by means of an OTG adapter.

The Sharkoon PureWriter RGB, with either red or blue mechanical switches, is available now. The Sharkoon PureWriter RGB TLK, with either red or blue switches, is also available.

Sharkoon has added a new version to the TG5 ATX PC Case launched in 2017: The Sharkoon TG5 RGB ATX Midi Tower. In addition to the tempered glass front and left side panel, the TG5 RGB ATX Midi Tower features four 120 mm RGB LED fans as well as a Sharkoon RGB LED strip. In total, six LED elements can be controlled via a 12V-G-R-B connector with the included 6-port RGB hub. The TG5 RGB is compatible with GIGABYTE RGB Fusion, MSI Mystic Light, ASUS Aura as well as other common RGB capable mainboards. For mainboards without a 12V-G-R-B connector, the TG5 RGB comes with a manual color control.

The Sharkoon TG5 RGB is especially made for fans of flashy gaming PCs who want an individualized illumination from as many as 16.8 million colors. The tempered glass left side panel provides a clear view of the illuminated components inside the case. Thanks to the cable management system, the PC case can always make a tidy impression. The front panel is designed cable-free and can thus be removed easily without pulling on any cabling. The front has three pre-installed 120 mm LED fans, and another 120 mm LED fan is pre-installed on the rear panel. In addition, a RGB LED strip is provided for the case interior. The strip can be attached magnetically and by using its adhesive tape. In total, six LED elements can be connected to mainboards with a 12V G-R-B connector and controlled, using the included 6-port RGB hub – as long as the LED elements are compatible with GIGABYTE RGB Fusion, MSI Mystic Light, ASUS Aura or other common RGB capable mainboards. For mainboards without a 12V-G-R-B connector, the TG5 RGB comes with a manual color control. This is equipped with switches, enabling the illumination of the fans and the strip in seven colors, including white. In order to strengthen airflow inside the case, the top panel provides room for up three 120 mm fans or two 140 mm fans. For water cooling, a 280 mm or a 360 mm radiator can be installed to the front of the case.

CPU coolers with a maximum height of 16.7 cm can be installed. A CPU cooler cutout in the mainboard tray facilitates the installation. Graphic cards with a maximum length of 40 cm can be inserted, and the maximum length for the power supply is 20.5 cm. Up to three 3.5" hard drives can be mounted decoupled in the tunnel’s HDD cage. If desired, the complete HDD cage can be fixed, via thumbscrews, onto the bottom of the tunnel - and using the oval hole cutouts, the cage can be positioned up to the fan on the front panel. Within the tunnel, a decoupled mounting is provided for the power supply. Two 2.5" HDD/SSDs can be mounted further behind the mainboard tray, or on the tunnel, by means of the two 2.5" mounting brackets and thumbscrews. Four detachable dust filters give protection from dirt, and the filter on the top panel has a convenient magnetic fastening. Two detachable dust filters are located along the sides of the front panel. The front panel is also equipped with two USB 3.0 and two USB 2.0 ports plus two audio ports for connecting peripheral devices.

The Sharkoon TG5 RGB ATX Midi Tower is now available from authorized retailers.

The Sharkoon 1337 mouse mat has now been on the market for over 10 years and is one of the all-time bestsellers for well-known online retailers. Since the trend for RGB illumination seems to be unstoppable, it was only natural that the manufacturer also illuminate their bestseller. With the 1337 RGB, Sharkoon now introduces the world’s first RGB illuminated textile mouse mat. Available in the dimensions of 359 x 279 x 3 mm, it is intriguing for gamers who do not just want colorful visual accents on their desktops from their input devices.

Sharkoon now offers the well-known 1337 gaming mats with illumination. The predominately black, 1337 RGB textile mouse mat provides a bordering illuminated RGB string, secured in place with DurableStitch sewing. Three total lighting modes are preset and available: Permanent illumination in one of seven preset colors, Pulsating illumination of one of these colors, and a RGB mode with automatic color change. An integrated RGB controller is located on the upper left edge of the mat, in which all settings occur through a single provided button. Also incorporated into the RGB controller is a mouse cable guide, which makes a separate mouse bungee redundant. The 1337 RGB is powered through a textile braided 180 cm long USB cable with Type A connector, making it compatible with every computer type with corresponding USB port.

The proven characteristics of the Sharkoon 1337 Gaming Mats remain unchanged: The mats were designed together with pro gamers and consist of a durable textile surface, which has minimal start and friction resistance, enabling a precise, fast and quiet mouse usage. Perfectly compatible with all conventional mouse types, or more specifically, both optical and laser sensors. The nonslip rubber base promises a secure grip on all flat surfaces. With dimensions of 359 x 279 mm, and a low height of only 3 mm, the 1337 RGB offers generous and unrestricting freedom of movement.

The Sharkoon 1337 RGB Illuminated Gaming Mouse Mat is now available from authorized retailers.

Sharkoon expands their range of gaming seats and, with the SKILLER SGS2, introduces a new seat with a breathable fabric cover. The base is made from a steel frame construction, which, in addition to its class-4 gas lift piston, promises optimal stability. Individual adjustments are possible via the 3D armrests and adjustable backrest with tilt control system. Five 60 mm wheels on the steel five-star base provide mobility. The seat offers four total color versions.

Sporty, black design with a selection of highlights in the colors red, blue, green or gray, characterize the new gaming seat from Sharkoon. This time, however, breathable fabric upholstery is used. This encases the 83 cm high foam padded backrest as well as the 39.5 x 50 cm large seat. Embroidered logos and colored stitching, matching the respective color version, additionally decorate the seat. To support an ergonomic seating posture, the gaming seat is equipped with a class-4 gas lift piston, ensuring an optimal seat height. The 3D armrests offer individuality, with adjustments possible in terms of arm length, height and horizontal angle. Breathable fabric head and lumbar cushions, which are provided, match the same color accents of the gaming seat. The lumbar cushion situates into the desired position by using the flexible straps, and both cushions fasten using clip closures. During quick breaks, the backrest can lock at a wide angle between 90° and 160°. With its tilt control system, the SGS2 offers a rocking chair atmosphere with tilt angles from 3° to 18°.

The seat has a steel frame construction with a diameter of 19 mm. A massive five-star base provides further stability, which is also made of steel. The gas lift piston can safely support a maximum weight of 110 kilograms, while the maximum height of the user is estimate at 185 cm. Five 60 mm wheels support the stable stand and ensure mobility on level surfaces. The total weight of the SGS2 is 20.8 kilograms.

The Sharkoon SKILLER SGS2 is available starting calendar week 8 from authorized retailers.

With the Sharkoon SKILLER SGC1, Sharkoon presents the first case within their SKILLER series. The Window Version offers an acrylic side window with an interior paint in the colors red, green, blue and black, plus a 120 mm LED fan in the respective matching color mounted to the rear panel. The Standard Version has a closed side panel, whereby both version designs are especially suitable as striking gaming PCs for cost-conscious gamers.

Sharkoon expands the specifically designed for gamers SKILLER series with a PC case for the very first time. With a front panel featuring a fins pattern and angular design elements, the newly introduced SGC1 case aims particularly at customers who already own SKILLER products or prefer a gaming PC in the typical design. Both versions come in black and are almost identically designed, however, the Window Version of the striking case features an acrylic side window, LED fans and interior paint in the colors red, green, blue and black. A cable management system and oval hole cutouts, for example for fans, radiators and the HDD cage, are provided inside both versions. The tunnel on the case bottom not only is intended to improve airflow inside the case, but also to conceal the power supply and hard drives from view. Audio connectors for the microphone and headphones as well as two USB 3.0 interfaces are located on top.

The front panel of the series comes with a 120 mm fan and offers installation options for an additional fan up to 140 mm. The front supports the optional ability to mount a 240 or 280 mm radiator. A pre-installed 120 mm fan is attached to the rear panel; with the Window Version, it is a 120 mm LED fan. Two 120 mm fans can attach to the side panel of the Standard Version, if needed. The top panel of the Window Version offers the possibility to install up to three 120 mm fans or two 140 mm fans, or optional, 360 or 280 mm radiators can also mount here. The tunnel provides enough space for power supplies up to 24 cm in length and includes a HDD cage, which can accommodate two 3.5" or two 2.5" hard drives decoupled. Oval hole cutouts allow flexible positioning of the HDD cage. If additional 2.5" hard drives are needed, two hard drive brackets are located behind the mainboard tray, which easily attach with thumbscrews. A CPU cooler cutout also facilitates the installation of CPU coolers with a maximum height of 16.5 cm. Cables can be routed behind the mainboard tray via the numerous cable pass-throughs. The maximum length of usable graphics cards is 40 cm. The installation of optical drives is modular, with two drive bays for 5.25" drives located in the front. The drive bays are removable, if extra space inside the case is required. A detachable dust filter is located behind the front panel and on the bottom panel on the Standard Version, while the SGC1 Window also has a magnetic fastening dust filter on the top panel.

The Sharkoon SKILLER SGC1 ATX Midi Tower is now available from authorized retailers. The Sharkoon SKILLER SGC1 Window is also now available in the color versions red, green, blue and black.

With the Sharkoon Quickstore One, the range of external enclosures with a USB 3.1 interface expands further. It features a USB Type C port and is suitable for tool-free installation of a 2.5" HDD/SSD with a maximum height of 9.5 mm. The case is compatible with Windows 7/8/10, Mac OS X and Linux. The recommended retail price is 24.99 euros.

Sharkoon has historically offered a large variety of external hard drive enclosures and, with the new Quickstore One, introduces the third portable storage solution with a USB 3.1 interface. The top cover is comprised of brushed aluminium, which is available in the color versions of black or silver, with a plastic underside in black for both versions. The compact dimensions measure 130 x 83 x 16 mm, with a weight without a built-in hard drive of 92.5 grams. The Quickstore One is aimed at those customers who prefer a completely tool-free and fast installation of 2.5" drives without having to sacrifice the high transfer rates of USB 3.1. The hard drive easily installs by hand in a few simple steps: push the underside to slide it open and insert a 2.5" HDD or SSD. Maximum height of usable drives is 9.5 mm. The enclosure offers a USB 3.1 interface with a USB Type C port. The case connects to a computer by means of the provided 100 cm long USB cable with Type C plug to Type C plug. In combination with USB 3.1, the built-in Asmedia Controller, ASM1351 and ASM1542 offer a data transfer rate of up to 10 Gbit/s. The case is compatible with both SATA Revision 3.0 and earlier SATA Revisions. A status LED next to the USB Type C port indicates data transfer. Plug and Play is provided for the supported operating systems Windows 7/8/10, Mac OS X and Linux.

The Quickstore One is now available in the color versions black and silver.

Sharkoon expands their range of input devices and introduces, with the SM1, a clip-on microphone made from metal. If offers a wide range of applications plus the SM1 supplements every type of headphones with a microphone function and, accordingly, allows it to be used as a headset.

The SM1 from Sharkoon is a metal lavalier microphone, which is particularly suitable as a complement for headphones. Thanks to its metal clip, the microphone can attached, for example, to the cable of the preferred headphones or directly to clothing. It is also suitable for applications such as lectures, presentations, video production, podcasts and streaming. Thanks to its lightweight of only 31 grams, including cable, and with its compacted dimensions, the black SM1 ensures discreet use. The 250 cm long cable guarantees maximum freedom of movement.

The directional characteristic of the microphone is unidirectional and especially designed for voice recordings. Frontal incoming sound is preferred for recording, while lateral incoming sound is accounted for extensive spatial sound. However, sound coming from behind is muted and not recorded. The SM1 is additionally equipped with a foam pop filter to assist against wind and movement noise, which is easily removable, if necessary. Specifications include an impedance of 0.68 kΩ ± 30% at a frequency range of 50 Hz to 16,000 Hz; and a sensitivity specified at -68 DB ± 3 db. The SM1 connects via a 3.5 mm microphone jack (TRS) to all conventional PCs and notebooks with a corresponding microphone port.

The Sharkoon SM1 is now available from authorized retailers.

Sharkoon expands their range of input devices for gamers and, with the SHARK FORCE PRO, introduce an optical gaming mouse in a symmetrical design. The DPI switch on the surface can adjust the sensitivity of the built-in PixArt PAW3307DL-THST sensor in four steps from 400 to 3,200 DPI. The mouse provides six buttons, with the left and right mouse buttons using Omron switches. Five color versions are available, each with color matching LED illumination on the bottom.

The Sharkoon SHARK FORCE PRO, primarily in black, aims directly at price-conscious gamers who prefer easy handling and colorful accents on their mouse mat. The new optical gaming mouse is available in five different color versions, each with a stylish narrow strip running down the surface in the colors black, white, green, red or orange. The permanent LED illumination on the bottom lights up to match the color version, whereby the black SHARK FORCE PRO illuminates blue on the bottom. The SHARK FORCE PRO is equipped with six buttons, with Omron switches in the left and right mouse buttons ensuring long operating life cycle. Two flat thumbs buttons are located on the left side of the mouse, while the surface offers a clickable mouse wheel as well as a DPI switch. The PixArt PAW3307DL-THST sensor reaches up to 3,200 DPI. Sensitivity is cycled through, and set to one of the preset steps of either 400, 1200, 2400 or 3200 DPI, using the DPI switch. Visually, the illuminated SHARK FORCE logo serves as a DPI indicator displaying the current DPI step, with the brightness ascending brighter with each higher step selected.

The SHARK FORCE PRO polling rate is 1,000 Hertz; the lift-off distance is 1.5 millimeters. Two plastic mouse feet made from PTFE promises the best possible gliding performance, the rubber surface ensures a secure hold in their hand. The lightweight mouse is only 97 grams and connects via a textile braided cable with a gold-plated USB plug.

The Sharkoon SHARK FORCE PRO Optical Gaming Mouse is now available from authorized retailers.

With the SKILLER SGH2, Sharkoon expands the lineup within their SKILLER series and introduces, for the very first time, a stereo gaming headset with USB connector. It is equipped with 50 mm drivers, projecting deep bass and clear highs. An omnidirectional microphone with flexible microphone arm promises perfect voice transmissions. Visually, the SGH2 attracts attention with its subtle mesh covers and blue LED illumination on the ear cups. The headset can operate on any PC or notebook with an available USB Type A port on Windows 7/8/10, no driver installation is needed. It is also compatible with the PlayStation 4. Connect it for use via its gold-plated USB Type A connector.

The built-in 50 mm drivers are specially designed to meet the needs of demanding gamers and have a frequency range of 20 to 20,000 hertz with a maximum output of 50 milliwatts. The attached microphone offers omnidirectional usage and promises natural voice transmissions while gaming as well as during voice chats. Thanks to the flexible microphone arm, positioning is always adaptable to individual needs. Due to its circumaural design, the extra-large ear pads effectively contribute to the suppression of ambient noise. The headset also has a spring loaded headband suspension. This allows the headset to automatically adapt to the shape of the head and, even during prolonged gaming or hectic playing situations, ensures the best possible stability as well as outstanding wear comfort.

The headset connects and operates via USB, plus has an integrated sound card, which is compatible with Windows 7/8/10 and the PlayStation 4, without driver installation. Thus, consistent headset sound characteristics are provided, for example when at LAN parties and events, even when using external devices. Also integrated is the easily accessible volume control via rotary wheel on the left ear cup. The textile braided USB cable with gold-plated Type A plug is 250 cm in length, thus providing sufficient leeway while connected to a PC.

The Sharkoon SKILLER SGH2 USB Gaming Headset is now available from authorized retailers.

With the compact S1000 and S1000 Window, Sharkoon introduces two new micro-ATX cases with an integrated tunnel for power supplies and hard drives. As a result, the power supply and hard drives are installed discreetly to the case bottom and out of sight. The S1000 Window version also offers an acrylic side window and a pre-installed 120 mm blue LED fan on the rear panel.

Fresh air is supplied through the side air intakes of the front panel, behind which a detachable dust filter is also provided. Another removable dust filter is located on the bottom of the case. Both case versions include a pre-installed 120 mm fan in the front. Suitable mounting holes are also provided for additional fans. Alternatively, despite the compact design, a 240 mm radiator can be installed with a total height of 5.9 cm including fan. To facilitate the installation of 280 mm radiators, the 5.25" drive bay is modular and, if necessary, easily removed. Located on the top of the front panel are the audio connectors for the microphone and headphone as well as two USB 3.0 ports. These are incorporated directly into the body of the case, thus allowing the front panel to be cableless removed. On the top panel of the S1000 Window is an additional, pre-installed dust filter, which is secured by magnetic fasteners, plus it is also possible to install up to three 120 fans or two 140 mm fans. With the S1000, the top panel is closed and a 120 mm fan is pre-installed on the rear panel, but without LED illumination. Another optional 120 mm fan can be installed to the side panel.

The S1000 has room for a CPU cooler with a maximum height of 15.5 cm; within the S1000 Window, the installed CPU cooler can have a maximum height of 15 cm. In both case versions, graphics cards can have a maximum length of 40 cm. The opaque tunnel offers enough space for decoupled mounting of a power supply with a maximum length of 24 cm. Inside the HDD cage, up to two 3.5" hard drives or two 2.5" SSDs can be decoupled mounted. The cage can also be slightly moved along the tunnel floor thanks to the oval whole cutouts and convenient thumbscrews, allowing more space for cabling. Air vents on the tunnel ceiling ensure optimal cooling of drives. Up to two 2.5" HDD/SSDs can mount to the back of the mainboard tray with help of two mounting brackets and attached thumbscrews. The cable management system with practical pass-throughs guarantees easy and discreet cabling.

The Sharkoon S1000 is now available from authorized retailers. The Sharkoon S1000 Window is also now available.

Sharkoon expands the lineup within their SKILLER series and introduces another keyboard with mechanical switches from Kailh: The Sharkoon SKILLER MECH SGK3 is the big brother of the recently released SGK2, which came without a number block. The new SGK3 is just as robust and offers, in addition to a number block, customizable RGB illumination with up to 16.8 million colors for the keys plus a gaming software with included macro manager.

Typical for the SKILLER MECH, the SGK3 utilizes the proven switches from Kailh. As usual, customers have the choice between blue, brown and red switches. The blue switches are tactile and provide acoustic as well as detectable feedback. The brown switches are just as tactile, while also offering a detectable switching point but no acoustic feedback. For those desiring both an undetectable switching point and click point, the linear red switches are for you. All three offer the same operating force of 50 grams as well as a 1.9 mm distance to actuation point. The operation life cycle of the keys is at least 50 million keystrokes. Visually, the SKILLER MECH SGK3 wows with its customizable RGB illumination with up to 16.8 million colors. Over twenty lighting effects come pre-programmed from the factory and, without using the software or driver installation, activate easily through a shortcut. Individual key assignment adjustments are possible without using the software, as well. The pre-programmed lighting also allows additional customization, such as to the frequency, brightness, color scheme and direction of the chosen lighting effect. Its technical aspects include n-key rollover (changeable to 6-key rollover), anti-ghosting keys, 1,000 Hz polling rate, gaming modes, arrow keys functions interchangeable with the WASD section, and function keys with preset multimedia actions.

The gaming software, with included macro manager, is free for download from the Sharkoon website without registration. In addition to programming macros, it also offers a clear selection of pre-programmed lighting effects, to include their configuration. Record up to 100 macros, each with up to 250 key sequences. Individual key assignments and multimedia actions can be stored within the three different profiles of onboard memory. If necessary, these can be exported and saved to the respective PC through the software. The SKILLER MECH SGK3 connects via a textile braided cable with gold-plated plug.

The Sharkoon SKILLER SGK3 is available with either blue, brown or red mechanical switches from authorized retailers.

With the AM5 case series, Sharkoon introduces a new Midi tower with a front panel finished with a glossy metallic car paint and available in two versions: The Sharkoon AM5 Silent offers pre-installed damping mats; the AM5 Window comes without damping mats, but with an acrylic side panel. Both versions are available with front panels painted in a mirror finish in the colors red, blue or titanium.

Airflow is possible thanks to the numerous air vents on both sides of the front panel, behind which is also a removable dust filter. The Silent version has two pre-installed 140 mm fans in the front, while the Window version comes with one pre-installed 140 mm fan. Additional pre-drilled holes for more fans are also available. Alternatively, a 280 mm or 360 mm radiator with a total height of up to 5.5 cm, including fan, can be installed. Microphone and headphone audio ports as well as two USB 2.0 and USB 3.0 ports are all located on the top panel. Easily remove the front panel at any time thanks to its cableless design. On the top panel of the Window version, there is a pre-installed dust filter with magnetic fasteners plus the possibility to mount either up to three 120 mm fans or up to two 140 mm fans. With the Silent version, as expected, the top panel is closed. On the rear panel of the AM5 Silent, a 120 mm fan is pre-installed. With the AM5 Window, the pre-installed 120 mm LED fan on the rear panel matches the color of the front panel lacquer.

The body designs of both versions are similar, therefore in both versions a CPU cooler with a maximum height of up to 16.7 cm can easily install through an opening in the mainboard tray. Maximum length of graphics cards is up to 40 cm in length. Inside the tunnel, there is sufficient space for a power supply up to 20.5 cm in length for decoupled mounting. Up to two 3.5" hard drives can be installed decoupled into the HDD cage. If necessary, the HDD cage can be positioned up against the fans in the front panel thanks to the oval hole cutouts and convenient thumbscrews on the tunnel floor. For example, if more space is needed for the power supply cabling. Up to two 2.5" HDD/SSDs can also attach behind the mainboard tray with help from two 2.5" drive bay trays and the provided thumbscrews. Optionally, the HDD cage also can accommodate up to two SSDs. Simple and discreet cabling is ensured, thanks to the sophisticated cable management system and numerous cable pass-throughs within the case.

The Sharkoon AM5 ATX Silent, with a painted front panel in either red, blue or titanium, is available from authorized retailers. The Sharkoon AM5 Window, also with a front panel painted in red, blue or titanium, is also available.

Sharkoon expands their range of flat, mechanical keyboards and introduces with the PureWriter, a low-profile keyboard with number block and dedicated multimedia keys. Recently released was the Sharkoon PureWriter TKL, the little brother in 2-block layout. Like with the TKL version, Sharkoon again uses flat, mechanical switches from the company Kailh. The Sharkoon PureWriter, in a 3-block layout, is now available with either red or blue switches.

With the PureWriter, Sharkoon now presents a flat, mechanical keyboard for lovers of the number block. It also offers separate multimedia keys for volume control, play/pause or to simply launch the preferred media player. The PureWriter is large at 436 mm long and 127 mm wide, and again frameless, compact and flat. The aluminium alloy top cover improves the stability of the keyboard. Technically, the keyboard is equipped with n-key rollover, anti-ghosting keys and a polling rate of 1,000 Hz, making it state of the art.

The new PG1350 series switches from Kailh made the flat construction of the Sharkoon PureWriter TKL a possibility. The same switches are used again in the PureWriter, or rather, the 3-block layout version: The Sharkoon PureWriter Blue offers an acoustic, tactile switch with a detectable switching point. The distance to actuation point is 1.5 mm while the operating force is 55 grams. The Sharkoon PureWriter Red offers a linear switch, undetectable switching point and click point, operating force of 45 grams and 1.5 mm distance to actuation point. Both versions have a keycap height of 6.2 mm and the keys have a minimum operating life cycle of 50 million keystrokes.

The blue LED illumination is infinitely adjustable and offers a multitude of pre-programmed lighting effects. Customized lighting can be programmed on-the-fly and saved in five profiles, for example individual lighting of single keys. All settings are made directly on the keyboard; therefore, software is not necessary and thus not included in delivery. The PureWriter connects via one of the two included USB cables, each with a gold-plated micro-B and type A plug. The 50 cm long cable is perfect to connect the keyboard with notebooks; the 150 cm long cable is suitable for conventional PCs. The PureWriter is compatible with Windows 7/8/10. With an OTG adapter, Android devices, such as smartphones and tablets, can also be used.

The Sharkoon PureWriter is now available in either red or blue mechanical switches from authorized retailers.

Sharkoon expands the lineup within their SKILLER series and introduces a new keyboard with mechanical switches from Kailh: The Sharkoon SKILLER MECH SGK2 is a robust keyboard in a 2-block layout, deliberately designed without a number block, allowing even more room on a gamer table. As a result, the SGK2 is particularly suitable for demanding use, such as in eSport.

Typical for the SKILLER MECH, the SGK2 has a reinforced metal surface, providing stability and torsion strength, and ensures stable, nonslip positioning on every table surface thanks its fold out, rubberized feet on the keyboard bottom.

As with all mechanical keyboards by Sharkoon, the SKILLER MECH SGK2 again relies on the tried and tested switches from Kailh, the micro-switch specialist from Asia. Users have the classic choice between blue, brown and red switches. The tactile blue switches are known to provide acoustic and detectable feedback. For those not needing click noise will enjoy the brown switches, which have a detectable switching point but no acoustic feedback. The red switches offer an undetectable switching point and click point. All three, however, offer the same operating force of 50 grams and a distance to actuation point of 1.9 mm. The operating life cycle of the built-in mechanical keys, according to the manufacturer, is at least 50 million keystrokes.

In addition to n-key rollover, anti-ghosting keys, gaming modes and function keys with preset multimedia actions, this gaming keyboard offers practical on-the-fly macro recording. This means macros can be recorded without software, by using a record key, in just a couple quick steps. Using the five macro keys on the side of the keyboard, the recorded macros can be easily launched at any time. Once again, just like in 2016 with the launch of the SKILLER MECH SGK1, each respective switch offers white LED illumination with an LED on every single key. The lighting is adjustable in three brightness levels, plus also offers a pulsating mode or completely turn off the keyboard illumination. The Sharkoon SKILLER MECH SGK2 connects via a textile braided cable with gold-plated USB plug.

The Sharkoon SKILLER MECH SGK2 with either blue, brown or red mechanical switches are available from authorized retailers.

Sharkoon expands their range of cases and, with the AI7000 Silent, introduce for the first time a robust ATX Midi tower with pre-installed damping mats. These damping mats effectively reduce the operating noise of the PC, without affecting the airflow inside the case. The case is especially suitable for silent PCs.

The Sharkoon AI7000 Silent is equipped with damping mats on both side panels, top panel and front panel. Sufficient space inside the case allows installation of a wide range of components: Install the power supply and up to three 3.5" hard drives decoupled within the tunnel on the case bottom. The AI7000 Silent also comes with two mounts for 2.5" drives behind the mainboard. Thanks to numerous openings, the mainboard can be discreetly cabled. CPU coolers up to a height of 17.5 cm can be installed thanks to a practical mainboard tray cutout. The maximum length of graphics cards is 38 cm; power supplies up to 23 cm in length. In the front, there is enough room for a 280 mm radiator with a total height of up to 5.7 cm, plus a fan. As with all newer Sharkoon cases, the front panel is cableless and designed for easy installation, for example, of 5.25" drives. Detachable dust filters, behind the front panel and case bottom, protect the hardware from dirt. Above the front panel, the case offers two USB 3.0, USB 2.0 and audio ports. A 19-pin mainboard connector connects the USB 3.0 ports to the mainboard and can additionally offer alternative USB 2.0 ports. Two 140 mm fans are pre-installed behind the front panel; a 140 mm fan is pre-installed on the rear panel. Accents on the front air intakes are available in the colors red, green, blue and black, which determine the color version of the case.

Also presented is the Sharkoon AI7000 Glass, with a tempered glass side panel, which provides almost identical features but does not contain damping mats. Four different color versions are available, each with a visually matching LED fan on the rear panel.

The Sharkoon AI7000 Silent is available from authorized retailers. The Sharkoon AI7000 Glass is also available.

Sharkoon expands their range of mechanical keyboards and introduces the PureWriter TKL, an innovative mechanical keyboard with low-profile switches from the micro-switch Asian specialist Kailh. These innovative, flat mechanical switches enable the compact and flat design of the Sharkoon PureWriter: TKL stands for tenkeyless – the keyboard comes without a number block. The PureWriter TKL is currently available with red and blue switches; brown switches will follow shortly.

With the PureWriter TKL, Sharkoon presents a purist keyboard for all occasions, which, in addition to its light and compact construction, stands out through its innovative mechanical switches in ultra-flat design. Thanks to the missing number block, the frameless keyboard measures a compact 355 mm in length, 127 mm wide and only 23 mm in height when the feet are folded-in, making it as flat as possible. It weighs only 503 grams. It also offers all the technical essentials with n-key rollover, anti-ghosting keys and a polling rate of 1,000 Hz.

The PureWriter TKL Blue offers the usual characteristics of the same mechanical switches or rather an acoustic, tactile feedback with a detectable switching point. The distance to actuation point is only 1.5 mm and an operating force of 55 grams. The PureWriter TKL Red offers a lineal switch and boasts both an undetectable switching point and click point with an operating force of 45 grams plus a distance to actuation point of 1.5 mm. The keycap height on both versions is only 6.2 mm and has an operating life cycle of at least 50 million keystrokes.

It also offers infinitely variable blue LED illumination with numerous pre-programmed lighting effects. Individual lighting can be programmed on-the-fly, for example to illuminate preferred keys, and saved in five profiles. Software is not necessary since all settings are made directly through the keyboard. The PureWriter TKL connects via one of the two included USB cables, with gold-plated Micro-B and Type A connectors. The intentionally short 50 cm long cable is suitable for notebooks, while the 150 cm long cable provides enough reach for conventional PCs. The PureWriter TKL is compatible with Windows 7/8/10 and, with a commercial OTG adapter, can be used with Android devices, such as smartphones and tablets.

The Sharkoon PureWriter TKL is available with either red or blue mechanical switches from authorized retailers.

With the TG5 ATX PC case, Sharkoon introduces a gaudy Midi tower with the front and one side panel made from tempered glass, which is available in four different color versions and pre-installed with color matching 120 mm LED fans from the factory.

With the cable management system and cable terminals, all cabling can be concealed between the mainboard and the non-window side panel. The power supply as well as up to three 3.5" hard drives can be installed within the tunnel, which contains ventilation slots, on the bottom of the case.

The front panel is cableless designed and thus easy to remove. CPU coolers with a maximum height of 16.7 cm can be installed, with installation simplified thanks to a cutout in the mainboard tray. Maximum length for graphics cards is 40 cm. Maximum length for installing a power supply is 20.5 cm. Pre-installed dust filters, with the top panel dust filter attaching via magnet fasteners, protect the PC from contamination. Up to two 3.5" hard drives or two 2.5" HDD/SSDs can be decoupled mounted in the HDD cage. If necessary, the entire HDD cage with thumbscrews can be attached to the bottom of the tunnel and, thanks to practical oval hole cutouts, can be positioned up against the fans on the front panel. This way, more storage space is available for power supply cabling. Behind the mainboard, the TG5 provides two vertical supports, with convenient thumbscrews, for up to two additional 2.5" HDD/SSDs.

Optimized airflow is ensured thanks to the numerous air vents on each side of the front panel. Three 120 mm LED fans are pre-installed. Alternatively, suitable pre-drilled holes are provided for either two 140 mm fans or a 360 mm radiator. A pre-installed 120 mm LED fan is mounted on the rear panel or, optionally, replace it with a 120 mm radiator. The top panel offers room to attach either a 240 mm or 120 mm radiator with a total height of up to 6 cm, plus fan. Optionally, up to three 120 mm or two 140 mm fans can be mounted beneath the magnetic dust filter. The fans or radiators can be positioned perfectly thanks to the oval hole cutouts.

Audio connectors for microphone and headphones as well as two USB 2.0 and USB 3.0 ports are located on the top of the front panel. The USB 3.0 ports are connected via a 19-pin mainboard connector, including alternative USB 2.0 plug, to ensure backward compatibility with older mainboards.

The Sharkoon TG5 ATX PC Case with either red, green, blue and white illuminated 120 mm LED fans are available from authorized retailers.

A new wind blows from Sharkoon and their range of PC power supplies expands with a new series: The Sharkoon SilentStorm Icewind power supply series is now available in two editions, black or white, in either 550, 650, and 750 Watt.

The Sharkoon SilentStorm Icewind, in a white edition, is deliberately kept in line with the colors snow white and ice blue and is aimed at users who, in addition to the technical details, also attach importance to the design of their components and their cabling. Naturally, the textile braided cable also fits perfectly into the color scheme.

Modular cables and cable combs ensure the PC stays tidy. The cables can be secured with practical cable combs and are kept intentionally modular, except for the firmly soldered 24-pin mainboard cable and 4+4-pin CPU cable. This ensures that only the immediately needed cables are used. In addition to the firmly soldered cables, a cable with three 4-pin IDE connectors as well as three cables with three SATA connectors are included; an extra two PCIe cables with a 6+2-pin connector is provided in the 550 Watt version. The 650 and 750 Watt versions connect via its two PCIe cables, each with two 6+2-pin connector. The unused cables can be easily stored in the included cable bag. Thanks to the used DC-to-DC technology, the SilentStorm Icewind benefits from increased voltage stability since the other voltages are not affected by load changes of the 12 V rail. The power supply is effectively cooled via its 135 mm fan.

The SilentStorm Icewind meets the requirements of the 80 PLUS Initiative “PLUG LOAD SOLUTIONS” with an efficiency of over 85% by 50% load and is certified “80 PLUS Bronze” for effective energy efficiency. The power supply is also certified according to current environmental standards and guarantees safety thanks to over power, over voltage, under voltage, short circuit, over current and over temperature protections. The warranty period is three years.

The SilentStorm Icewind Black, an all-black edition, is also available and offers nearly identical features such as “80 PLUS Bronze” certification, modular cable, DC-to-DC technology, 135 mm fan and a three-year warranty. Black flat cables are included instead of textile braided cables with cable combs.

The SilentStorm Icewind Power Supply Series in both black and white editions are available now from authorized retailers.

Sharkoon expands their range of gaming chairs with another model: The Sharkoon SHARK ZONE GS10 Premium Gaming Seat, from the SHARK ZONE product family, is available in typical black-yellow design. Attractive for gamers who already have SHARK ZONE series products and are looking for a chair with the right look, yet it is also for lovers of the striking style of the series.

The manufacturer again focuses on a sporty-sleek design with supportive, high-density foam padding on the seat and backrest. It utilizes a robust steel frame construction, similar to the already available SKILLER series (SGS3) seats, with a diameter of 20 to 22 millimeters.

Visually, the new premium gaming seat is kept primarily in black, with yellow highlights and design elements. The nonslip cover is made from easy to clean synthetic leather with precise embroidered logos. The head and lumbar cushions are also made from synthetic leather, likewise with SHARK ZONE design.

Additionally, its ergonomics are not lacking. With its 3D armrests, the GS10 allows individual sitting postures since the armrests can be adjusted for every arm length, desired height and to any individual horizontal angle. For a comfortable sitting position, and for extended breaks, the backrest can be set and locked at a wide range between 90° to 160°. Plus, a spring-loaded tilt function is also included, in which the tilt angle lock adjusts and locks into a stable, desired position from 0° to 14°.

A robust class-4 gas lift offers maximum weight capacity to 120 kg and easy adjustments to the seat height. The 60 mm wheels, fitted on an aluminium five-star base, offers mobility on all even surfaces.

The Sharkoon SHARK ZONE GS10 Premium Gaming Seat is now available from authorized retailers.

With the SKILLER SGS3 Gaming Seat, Sharkoon introduces their very first gaming seat. Combining sporty-sleek design with the ergonomic requirements of persistent gamers and streamers, Sharkoon utilizes a robust steel frame construction and extra-large 75 mm wheels. Thanks to the integrated locks, the SGS3 is perfectly suitable for fans of racing games, who, for example, like to press the pedals while using a racing wheel.

The Sharkoon SKILLER SGS3 Premium Gaming Seat base color is predominately black, and made from nonslip synthetic leather. Within the different color versions, stitching and design element accents are highlighted in the colors blue, red, green, black or white. Visually, the high quality embroidered logos stand out.

Supportive foam pads in the seat and backrest provide outstanding comfort while sitting. The gaming seat supports ergonomic sitting posture with its 4D adjustable armrests, allowing the armrests to be customized to any arm length in both height and width as well as individual horizontal tilt angle. A stable class-4 gas lift piston provides the necessary basis for a maximum load capacity of up to 120 kg and allows for an individually adjustable seat height. The robust steel frame of the SGS3 also improves stability and promises longevity. A spring-loaded tilt function provides a rocking chair-like atmosphere, which can be adjusted and locked into a stabile position between 0° to 14°.

The headset and lumbar cushions, with accents in their respective seat color, are easily attached and effectively support both the neck and spine during longer gaming sessions. During extended breaks, the backrest of the SKILLER SGS3 Gaming Seat can be locked at a wide angle between 90° and 160°. Thanks to its massive aluminium five-star base, the seat remains safely on the floor while the backrest is tilted. The extra-large 75 mm wheels offer mobility on all flat surfaces. Unwanted rolling is prevented thanks to practical locks.

The Sharkoon SKILLER SGS3 Premium Gaming Seat is now available in the color versions black, black/blue, black/green, black/red, and black/white in authorized retailers.

Sharkoon expands their range of gaming peripherals and introduces a solid stereo headset for demanding gamers. High quality 40 mm drivers win over not just computer gamers with its precise and powerfully specific audiophile sound. Optimum voice transmission is promised thanks to the pop filter microphone, which is also detachable.

The Sharkoon B1 Stereo Headset is all-black and leaves a solid, purist impression with its materials and workmanship. The reinforced headband, with synthetic leather and stylish stitching, is comfortably padded for optimum wear comfort. The massive height adjustors of the ear cups are made from brushed aluminium and promises corresponding longevity. Mesh metal covers decorate the outside of the matte finished ear cups. But it is the sound quality of the B1 which leaves a lasting impression. High quality, powerful 40 mm drivers are used, offering brilliant highs and sonorous bass with an audiophile sound. Thick pads from soft synthetic leather completely surrounds the ear and efficiently contributes to suppress ambient noise. The detachable microphone is equipped with a pop filter, providing optimum voice transmission. The position of the microphone can always be individually customized, thanks to its flexible microphone arm. Without the microphone, the headset is also suitable as a headphone. Thanks to its TRRS stereo jack, the B1 is not only compatible with smartphones, but also with PlayStation 4 and Xbox One controllers as well as notebooks and Ultrabooks with modern TRRS ports. The headset cable is deliberately kept short at 110 cm and is practical for mobile usage or for connecting to a controller. The headset can also connect to computers by use of its included extension cable with TRRS port and two 3.5 mm stereo jacks. An inline controller is integrated into the extension cable for convenient access to both the volume control and microphone mute. When using the extension, the total cable length is 255 cm. All connectors on B1 are gold-plated; all cables are textile braided. Transport the headset and its accessories safely and securely within the included hardcase, with recesses and mounts provided.

The Sharkoon B1 Stereo Headset is now available from authorized retailers.

Sharkoon expands their lineup within the SHARK ZONE gaming series and introduces a new laser mouse with an RGB illuminated bottom. The integrated Avago ADNS-9800 laser sensor offers a maximum 8,200 DPI and the sensitivity is individually customizable in 100 DPI increments within the included gaming software.

The Sharkoon SHARK ZONE M52 Gaming Laser Mouse comes in a symmetrical design with a rubber, black surface and eight total programmable buttons. Omron switches in the left and right mouse buttons promise a long operating life cycle of at least 10 million clicks. The Avago ADNS-9800 laser sensor achieves up to 8,200 DPI. Sensitivity can be individually adjusted, by increments of 100 DPI, within the software from 100 DPI up to 8,200 DPI. Four DPI steps are factory preset and are conveniently selected via the DPI switch on the surface. Visually, the DPI steps are displayed through the white illuminated SHARK ZONE logo, in which the brightness changes per selected step. As an optical contrast, the M52 has an RGB illuminated bottom. Within the included gaming software, individual lighting effects can be selected from a total of 32 preset colors. In addition, the brightness can be adjusted in three steps to include pulsating illumination on the bottom.

All buttons on the M52 can be assigned numerous Windows and multimedia commands via the gaming software. This includes programmable macros as well as an X-shot function, which can emulate up to 255 consecutive left clicks after a single click on an assigned key. Also, a delay of up to 255 milliseconds can be set between each X-shot. The 128 kB onboard memory allows up to five individual configurations to be stored, each within a game profile. Unlimited gaming profiles can be configured on the PC and then, when needed, a game profile can be loaded into the onboard memory of the mouse. Practical: For subsequent use of the M52 on another PC, the same configurations are not lost and can be used at any time, even without any software installation.

The lightweight mouse is only 97 grams and connects via the typical SHARK ZONE black-yellow textile braided cable and gold-plated USB plug. Maximum polling rate is 1,000 Hertz; lift-off distance is between one millimeter up to five millimeters.

The Sharkoon SHARK ZONE M52 Gaming Laser Mouse is available from authorized retailers.

Sharkoon expands their popular Rapid-Case series with their fastest one yet, which thanks to its USB 3.1 interface offers a data transfer rate of up to 10 gigabits per second.

The Sharkoon Rapid-Case 2.5" USB 3.1 Type C is an external housing which can accommodate 2.5" SATA hard drives or 2.5" SSDs with a maximum height of 9.5 mm. Thanks to its USB 3.1 interface, the Rapid-Case offers a data transfer rate of up to 10 gigabits per second as well as up to 70% increase read and 40% increase write speeds on UASP capable host controllers. The internal SATA interface of the Rapid-Case supports SATA Revision 3.0 and is also backwards compatible to previous Revisions. The Rapid-Case connects via its included cable with future-proof, two-way Type C plug to every PC, laptop and MacBook with corresponding Type C port. A discreet status LED next to the USB 3.1 interface indicates operation and data transfer.

2.5" hard drives or SSDs can be installed quickly and easily. Unscrew the two housing screws with the provided screwdriver and then connecting the hard drive to the controller board. Once that is done simply slide the hard drive with the controller board into the housing and then screw into place.

The housing is made from robust aluminum and provides optimum protection for the hard drive. It fits into every pants pocket and is ideal for carrying important data thanks to its light weight of only 83 g and slim profile. The design of the housing is deliberately minimalist-elegant with a brushed surface finish and is available in both black and silver color versions.

The Sharkoon Rapid-Case 2.5" USB 3.1 Type C is now available from authorized retailers.

Sharkoon expands their lineup within the popular SHARK ZONE gaming series and introduces a new keyboard that focuses solely on the essentials. The entire housing is completely made of metal and ensures maximum stability on the table, even during heavy use, thanks to its solid design.

The Sharkoon SHARK ZONE K15 Keyboard impresses not just through its massive appearance, which is on full display with its frameless design and freestanding keys. Additionally, the K15 has an integrated, massive palm rest, which provides fatigue free gaming and supports overall ergonomics.

For convenient use, the keyboard provides seven total function keys with preset multimedia actions. A simply keystroke, for example, will comfortably launch the media player, web browser and E-mail provider. Adjust the volume to your desired level also effortlessly. In addition, the desired gaming mode, with disabled Windows key, launches easily via a simple shortcut. On request, all keys on the keyboard can be locked. The arrow keys functions are virtually interchangeable with the WASD keys.

Typical SHARK ZONE: The gaming keyboard connects via its black/gold textile braided cable with gold-plated USB plug. No software or driver installation is required to launch and use the keyboard.

The Sharkoon SHARK ZONE K15 Gaming Keyboard is now available from authorized retailers.

Sharkoon expands their lineup of ATX cases and introduces the Sharkoon M25-W in both black and white. As an innovative unique feature, the elegant Midi tower is available from the factory with sound: Thanks to its integrated sound card, virtual 7.1 surround sound is conveniently provided through the audio front port on the case. As a result, it is ideal as a second sound source when operating speakers and headsets on a Windows PC. The M25-W dimensions are 45.0 x 21.0 x 46.5 cm (L x W x H) and weighs 6.5 kg.

The extra-large acrylic side panel offers an inside view of the case, which is illuminated by the pre-installed 120 mm LED fan on the rear panel. For internal arrangement there is a special tunnel on the case bottom, in which a power supply as well as up to three 3.5" hard drives can be inconspicuously installed plus it also ensures optimized airflow.

The mainboard and the remaining components enjoy perfect cabling thanks to the cable outlets. Maximum length for graphics cards is 40 cm; power supplies with a length of up to 20.5 cm. Pre-installed dust filters protect installed hardware from contamination. Attached on the top panel is an additional pre-installed filter with magnetic fastener. The cableless front panel is easily removable and facilitates, for example, the installation of a 5.25" drive bay. Two 120 mm fans in the front are factory installed, and pre-drilled holes for a 140 mm fan already exist. Optionally, three 120 mm or two 140 mm fans can be additionally mounted to the top panel. The front also offers the possibility to operate a 240 mm or 280 mm radiator, with a total height of 5.0 cm including fan.

The corresponding audio software for Windows allows virtual 7.1 surround plus individual equalizer functions, effects and microphone boost settings. The integrated USB sound card easily connects to the mainboard via the internal USB port. Stereo mode without driver installation is also possible.

The Sharkoon M25-W (Window) ATX Midi Tower is now available from authorized retailers. The M25-V (Value) is also alternatively available.

Sharkoon introduces another model to its popular X-Rest headset stands, this one with an innovative function: The Sharkoon X-Rest 7.1 Surround Sound Headset Stand featuring an integrated, external USB sound card. This allows easy upgrading of virtual 7.1 sound to existing Windows systems. The X-Rest 7.1 is also suitable as a second sound source when using speakers and headsets.

Angular design, textile braided cable and blue LED illumination - the Sharkoon X-Rest 7.1 maintains order, not just on the desk of a gamer. Your headset will always stand readily nearby and safely secured after each use. Thanks to its heavy base and nonslip rubber feet, the X-Rest 7.1 remains stable and can withstand stressful loads. As an additional feature, the new X-Rest provides virtual 7.1 surround sound on any Windows PC or notebook. Easily accessible operating controls on the device offer quick access to the microphone mute, volume control and equalizer settings. An invaluable advantage, especially during intense gaming sessions. A quick glance, for example, is the only thing needed to see if the microphone is muted: Once the mute function is activated, the LED illumination changes from blue to red. The X-Rest 7.1 is compatible to all headsets, regardless of whether it has a stereo jack or TRRS connector. The headset stand offers two 3.5 mm ports and automatically detects which connector is used. Therefore, all current Sharkoon headsets, even ones with the most recent TRRS cable, such as the Sharkoon SKILLER SGH1 Stereo Headset, can connect without messy cable clutter.

Not just for gamers, music fans were also considered: Eight preset equalizer modes are available and quickly selected via the equalizer button on the device. Adjust individual equalizer settings, as well as the virtual 7.1 surround sound, through the included Windows software and save the changes within each of the four different profiles. In addition, LED illumination can be completely disabled and the microphone settings, including microphone boost, can be customized. Stereo mode and the use of preset equalizer modes are also possible on PCs, Mac computers and the PS4. For this, no drivers need to be installed. The X-Rest 7.1 connects to a PC, Mac or PS4 via its textile braided USB cable, which also supplies power to the device. Total cable length is 200 cm.

The Sharkoon X-Rest 7.1 Surround Sound Headset Stand is now available from authorized retailers.

Sharkoon expands their lineup to the recently introduced SKILLER series and presents the first headset for the new gamer series: The Sharkoon SKILLER SGH1 Stereo Headset is barely noticeable while sitting on your head, thanks to its featherweight design of only 253 grams. The flexible headband suspension automatically adjusts to the contour of the head and ensures optimum wear comfort. Thanks to its modular cable system, the SGH1 is compatible with more than just standard PCs. It fully supports modern notebooks, Ultrabooks, smartphones and the newest console generations.

Two 40 mm drivers provide powerful sound, which have been specifically adapted to meet the needs of gamers. These have a frequency range of 20 to 20,000 Hertz and a maximum power of 100 milliwatts. The detachable, flexible microphone promises crystal-clear voice transmission during gaming and voice chats. For mobile use as a headset, the microphone is easily removable. The extra-large headset ear pads are circumaural and easily interchangeable: A set of synthetic leather and a set of cloth are included; change them out with just a few simple hand movements.

The SGH1 also connects to modern consoles and smartphones, thanks to its TRRS stereo jack. The textile-braided cable with gold-plated connectors is only as long as needed: The cable with TRRS stereo jack was deliberately kept short at 110 cm, for example, for convenient connection to smartphones, Ultrabooks and game controllers. The included extension, with two 3.5" mm stereo jacks, is also textile sheathed and connects to every standard PC. This connection option has an inline controller with volume control and microphone mute. The total cable length is 250 cm and offers ideal maneuverability for PC users.

The Sharkoon SKILLER SGH1 Stereo Gaming Headset is available now from authorized retailers.

Sharkoon expands their ATX Midi Tower lineup and introduces a minimalistic case series: The all-black S25 series is available in the traditional Window, Value and Standard versions, each offering various different features. The new cases are particularly suitable as a powerful computer for gaming and/or as an office PC, particularly with its sophisticated airflow.

The special construction of the inside of the case series allows discreet installation of various components. Cabling is inconspicuous and well hidden, thus not disrupting internal airflow. The power supply and up to three 3.5" hard drives can be mounted on the bottom of the case inside the tunnel, which are optimally cooled thanks to the tunnel's air vents. The cable outlets ensure orderly cabling of the mainboard and remaining components. A tower cooler up to 16.7 cm in height can be installed; the mainboard tray already has a cutout for easy installation. Maximum length for graphics cards is 40 cm; power supplies with a length of up to 20.5 cm. Up to two optical drives or up to four 2.5" HDD/SSDs can be inserted into the two 5.25" drive bays with automatically locking tool-free device installation. Complimenting this, a 5.25" to 3.5" bay cover is included within the package contents for, as an example, a 3.5" card reader. If necessary, the two 5.25" drive trays can be removed and a 280 mm radiation can be mounted in the front, if needed. Oval hole cutouts ensure perfect positioning for preferred cooling options. Inside the tunnel, two 3.5" hard drives can be decoupled mounted inside a pair of hard drive trays. Alternatively, both 3.5" drives can be removed and replaced by a 2.5" HDD/SSD, which is screwed into the tray. There is additional space on the case bottom for another 3.5" hard drive. Behind the mainboard tray, and on the tunnel, the S25 includes two brackets for two 2.5" drive trays, which easily install via thumbscrews. A pre-installed dust filter on the top and bottom of the case protect installed hardware from contamination. To clean, they are easily removed and re-attached. The front panel easily detaches without complications at any time thanks to its cableless design.

The Sharkoon S25-W ATX PC CASE, the Window version, comes with an acrylic side panel and offers two USB 3.0 and two Audio ports on the front panel. Two 120 mm fans are also pre-installed in the front, and a 120 mm LED fan on the rear panel. The top panel is equipped with a magnetic dust filter and offers room for an additional three 120 mm or two 140 mm fan. The S25-V (Value version) does not have the side window; instead, it is equipped with a metal side panel. However, a 120 mm fan is pre-installed on both the front and rear panels. The S25-S (Standard version) is also outfitted with a metal side panel and a closed top panel. The front panel offers two USB 2.0 and two Audio ports with a 120 mm fan pre-installed on the rear panel.

The Sharkoon S25-W ATX PC CASE (Window version) is available starting from the end of September. The S25-V (Value version) is now available. The S25-S (Standard version) is also now available from retailers.

Sharkoon expands their lineup of the new Skiller series and introduces an optical gaming mouse: The Sharkoon SKILLER SGM1 Gaming Mouse, with an optical PixArt PMW3336 sensor with up to 10,800 DPI. Five quickly accessible macro buttons provide decisive advantages for demanding gamers, who appreciate the benefits of comprehensive programming.

The SGM1 offers, in addition to its stylish ergonomic design, a seven-step weight tuning system. Using the six weights, each weighing four grams apiece, the weight of the mouse adjusts in seven increments between 106 to 130 grams. No tools are required; the spring-loaded locking mechanism on the bottom allows easy access to the weight tuning system tray. Durable Omron switches in the left and right mouse buttons promise stability, even during continuous use. The maximum polling rate is 1,000 Hz; lift-off distance is 2 mm. The optical aspects were also well thought-out, the RGB illumination of the mouse wheel and SKILLER logo are fully customizable. The SGM1 connects via a textile braided cable in a black-blue design with gold-plated connector, which offers sufficient room with 180 cm.

Create up to six different DPI steps using the including gaming software and cycle through them on the mouse via its DPI switch. The LED DPI indicator informs the user of the selected sensitivity of the sensor. Furthermore, through the software settings the RGB illumination, polling rate, double-click and scroll speed, angle snapping and axis sensitivity can all be cared out. For difficult shortcuts while gaming or during repetitive office work, the SGM1 offers 12 programmable buttons. This includes the illuminated 4-way scroll wheel and macro buttons. A single click can easily execute macros, keystrokes or multimedia comments. Thanks to the white illuminated macro buttons, preferred actions during gaming is always at your fingertips. Once configured, complex key sequences including delays and mouse clicks are saved as complete game profiles in the onboard memory of the SGM1.

The Sharkoon SKILLER SGM1 Gaming Mouse is now available from authorized retailers.

Sharkoon expands their lineup of the popular Skiller keyboard series and introduces their first mechanical version: The Sharkoon SKILLER MECH SGK1 boasts massive line management, reinforced aluminium alloy surface and white background illumination. The internal value of the gaming keyboard continues to impress with its n-key rollover, anti-ghosting, gaming modes and virtual interchangeable WASD section. The integrated palm rest supports ergonomics, which is ideal for long gaming sessions.

The SGK1 is available with high-quality mechanical Kailh switches, which are offered in three different versions: Brown (operating force: 45 g, switch: tactile, switching point: detectable, click point: undetectable, distance to actuation point: 2 mm), Red (operating force: operating force: 50 g, switch: linear, switching point: undetectable, click point: undetectable, distance to actuation point: 2 mm) and Blue (operating force: 50 g, switch: tactile, switching point: detectable, click point: precisely detectable, distance to actuation point: 1.9 mm). The brown switch behavior closely resembles the popular rubber dome keyboards, but offers a much longer operating life cycle of keys with a minimum of 50 million keystrokes. Prolific writers will find blue switches especially suitable, which provide the same long operating life cycle yet also give an acoustic feedback. Red switches, which again provide the same long operating life cycle, are for those who love no feedback with their switches.

The Sharkoon SKILLER MECH SGK1 is available with white LED background illumination with six brightness levels. Six lighting effects are factory pre-programmed, which are easily activated via simple shortcuts. Continuous wave, a pulsating or permanent illumination, an explosion lighting effect, tide, afterglow of the keys as well as the retro and well-known "snake" are all examples to be admired. There are also five individually programmable lighting profiles, which can also be set via a simple shortcut. The same is true also for adjusting the illumination brightness as well as the frequency of the lighting effects.

The Sharkoon SKILLER MECH SGK1, either with brown, red or blue mechanical switches, is now available from authorized retailers. Retailers please contact Beyond Technologies LTD at www.beyondtechnologies.co.uk.

Orderliness is paramount: The Sharkoon DG7000 ATX Midi Tower, designed specifically for gamers, impresses with its unique appearance and astounding functionality. The case, made from robust materials, is suitable for gaming PCs. Thanks to an optimized cable management system the DG7000 always ensures a tidy appearance, which is viewed through the acrylic side window. On the bottom of the case, up to three 3.5" hard drives and a power supply can be installed behind a stealthy panel. Two re-installed 140 mm LED fans are concealed behind the stunning front with mesh elements, a 140 mm LED is installed in the rear panel. The DG7000 is available in red, blue and green versions, each with matching colored LEDs, LED fans and interior painting. Two USB 3.0, two USB 2.0 and two Audio ports on the case front panel offers easy access for connecting peripheral devices.

The special design of the case allows discreet cabling plus provides lots of space for the installation of various components. The power supply and up to three 3.5" hard drives can be mounted decoupled behind a panel on the bottom of the case. The mainboard and the component cabling is also discreet. In addition to the CPU cooler cutout, there are numerous other openings surrounding the mainboard for all required cables. For water cooling, the DG7000 offers the possibility of a 280 mm radiator, with a total height of 5.7 cm including fan, to be attached to the front of the case. A tower cooler up to a height of 17.5 cm can be installed. Maximum length for graphic cards is 38 cm; power supplies with a maximum length of 23 cm. Pre-installed dust filters protect the installed hardware from contamination. For cleaning, they can be easily removed and put back on. Another dust filter is also pre-installed on the top panel, which can be easily removed thanks to the magnetic fastener.

Two 140 mm LED fans are pre-installed in the front; a 140 mm fan is on the rear panel, with each matching the color version of the case. Thus, the DG7000 is already equipped for a powerful yet equally silent cooling direct from the factory. To strengthen internal airflow, the top panel offers space for either up two 120 mm fans or two 140 mm fans.

The DG7000 offers tool-free installation for two 5.25" drive bays for optical drives. In total, up to five hard drives can be installed: On the bottom of the case, up to three 3.5" hard drives can be decoupled mounted. Behind the mainboard, the DG7000 provides two vertical supports, with convenient thumbscrews, for up to two 2.5" HDD/SSDs.

The Sharkoon DG7000 is now available from authorized retailers.

Sharkoon offers a new variant to their recently introduced DG7000: The Sharkoon DG7000-G ATX Midi Tower offers an improved view of installed components thanks to its extra-large side panel made of tempered glass. The tower, manufactured from robust materials, is especially suitable as a flashy gaming PC and is available in three different color versions.

The extra-large, transparent tempered glass left side panel underlines the unique look of the DG7000-G and, thanks to its optimized cable management system, always ensures a tidy appearance. Two USB 3.0, two USB 2.0 and two audio ports on the case front panel provides easy access to connect peripheral devices. Two pre-installed 140 mm LED fans are concealed behind the stunning front with mesh elements; a 140 mm LED fan is attached to the rear panel. To strengthen internal airflow, the top panel offers space for either two 120 mm fans or two 140 mm fans. The functional design of the case provides lots of space for the installation of various components and encourages discreet cabling. In addition to the CPU cooler cutout, there are numerous other openings surrounding the mainboard for all required cables. For optical drives, two 5.25" drive bays with tool-free installation are provided. On the bottom of the case, up to three 3.5" hard drives and a power supply can be installed behind a stealthy panel. The DG7000-G also provides two side-mounted vertical brackets, with convenient thumbscrews, for up to two 2.5" HDD/SSDs. A tower cooler with a height of 17.5 cm can be installed. Maximum length for graphic cards is 38 cm; power supplies with a maximum length of 23 cm. For water cooling, the tower offers the possibility of a 280 mm radiator, with a total height of 5.7 cm including fan, to be attached to the front of the case. Pre-installed dust filters protect the installed hardware from contamination. For cleaning, they can be easily removed and put back on. Another dust filter is also pre-installed on the top panel, which can be easily removed thanks to the magnetic fastener.

The Sharkoon DG7000-G ATX Midi Tower is now available in red, green and blue color versions with matching color power LEDs, pre-installed 140 mm LED fans and interior painting.

Sharkoon expands its range with a new stereo headset, which is specifically aimed at gamers and available in four colorful variations.

The Sharkoon RUSH ER2 Gaming Stereo Headset, in a closed design, provides a modular cable system and is compatible with the newest console generations, notebooks, smartphones and traditional PCs. The built-in 40 mm drivers promise well-balanced sound - the pivoting, flexible microphone delivers clear voice transmission.

Thanks to the solid ear cup suspension made from metal, soft ear pads and padded headband, the ER2 provides a secure and comfortable fit even during long gaming sessions or voice and multimedia applications.

The modular cable system with gold-plated connectors and textile braided cable offers two convenient connection possibilities: Via TRRS stereo jacks, the headset easily connects to modern consoles, notebooks and smartphones. The enclosed extension with two 3.5 mm stereo jacks allows conventional connection to every PC. The latter also includes a cable integrated volume controller including microphone mute. The cable with the TRRS stereo jack is pleasantly short at 110 cm, while the 3.5 mm stereo jacks extension lets you comfortably lean back wearing the headset due to its 250 cm cable length. Individuality with this headset is not just offered in the terms of cable length; the ER2 is available in the color variations black/red, black/green, black/blue and white/orange.

The Sharkoon RUSH ER2 Gaming Stereo Headset is available now from authorized retailers.

Sharkoon expands its range with a new stereo headset, which is specifically aimed at gamers and available in four colorful variations.

The Sharkoon RUSH ER2 Gaming Stereo Headset, in a closed design, provides a modular cable system and is compatible with the newest console generations, notebooks, smartphones and traditional PCs. The built-in 40 mm drivers promise well-balanced sound - the pivoting, flexible microphone delivers clear voice transmission.

Thanks to the solid ear cup suspension made from metal, soft ear pads and padded headband, the ER2 provides a secure and comfortable fit even during long gaming sessions or voice and multimedia applications.

The modular cable system with gold-plated connectors and textile braided cable offers two convenient connection possibilities: Via TRRS stereo jacks, the headset easily connects to modern consoles, notebooks and smartphones. The enclosed extension with two 3.5 mm stereo jacks allows conventional connection to every PC. The latter also includes a cable integrated volume controller including microphone mute. The cable with the TRRS stereo jack is pleasantly short at 110 cm, while the 3.5 mm stereo jacks extension lets you comfortably lean back wearing the headset due to its 250 cm cable length. Individuality with this headset is not just offered in the terms of cable length; the ER2 is available in the color variations black/red, black/green, black/blue and white/orange.

The Sharkoon RUSH ER2 Gaming Stereo Headset is available now from authorized retailers.

Sharkoon expands its range of peripherals and introduces a programmable mouse for gamers, which is also suitable for left-handers thanks to its symmetrical design. The Sharkoon SHARK ZONE M50 Gaming Laser Mouse, with the typical yellow cable, offers subtle yellow LED lighting and technical advantages for gamers: Avago ADNS-9800 sensor with up to 8,200 DPI plus a polling rate of 1,000 Hz and a lift-off distance from one to five millimeters. Interchangeable side panels offer individual customization for best grip and ergonomics. Omron switches in the left and right mouse buttons ensure longevity, five mouse feet offer outstanding gliding performance, and the brushed aluminium alloy bottom ensures both stability and durability. The M50 has seven total buttons, all of which are programmable, plus a precision scroll wheel. The laser mouse connects via its textile braided, yellow cable with gold-plated USB plug.

The included gaming software allows adjustments to the DPI steps, polling rate, double-click and scroll speed, angle snapping and axis sensitivity. In addition, macros can be conveniently programmed, for example, for difficult key combinations for gaming or repetitive office work. Complete gaming profiles can easily be saved in the onboard memory of the M50. Thus, even complex key sequences, including delays and mouse clicks, can be easily executed. Thanks to its internal memory, no settings are lost within the extensive gaming software.

The Sharkoon SHARK ZONE M50 Gaming Laser Mouse is available in authorized retailers. Retailers please contact Beyond Technologies LTD at www.beyondtechnologies.co.uk.

Sharkoon expands its range of peripherals and introduces a programmable mouse for gamers, which is also suitable for left-handers thanks to its symmetrical design. The Sharkoon SHARK ZONE M50 Gaming Laser Mouse, with the typical yellow cable, offers subtle yellow LED lighting and technical advantages for gamers: Avago ADNS-9800 sensor with up to 8,200 DPI plus a polling rate of 1,000 Hz and a lift-off distance from one to five millimeters. Interchangeable side panels offer individual customization for best grip and ergonomics. Omron switches in the left and right mouse buttons ensure longevity, five mouse feet offer outstanding gliding performance, and the brushed aluminium alloy bottom ensures both stability and durability. The M50 has seven total buttons, all of which are programmable, plus a precision scroll wheel. The laser mouse connects via its textile braided, yellow cable with gold-plated USB plug.

The included gaming software allows adjustments to the DPI steps, polling rate, double-click and scroll speed, angle snapping and axis sensitivity. In addition, macros can be conveniently programmed, for example, for difficult key combinations for gaming or repetitive office work. Complete gaming profiles can easily be saved in the onboard memory of the M50. Thus, even complex key sequences, including delays and mouse clicks, can be easily executed. Thanks to its internal memory, no settings are lost within the extensive gaming software.

The Sharkoon SHARK ZONE M50 Gaming Laser Mouse is available in authorized retailers.

Sharkoon expands its range of input devices and introduces a gaming mouse-keyboard set, specifically aimed at price-conscious gamers.

The Sharkoon SHARK ZONE GK15 Gaming Kit comes in the typical black-yellow SHARK ZONE design. It consists of a gaming keyboard with red, yellow and green LED illumination and a gaming mouse with LED illumination in five colors.

The rubber dome keyboard with 3-block layout has an integrated palm rest and provides function keys with preset multimedia actions. The keyboard is especially suitable for gamers thanks to its gaming mode with deactivated Windows key, interchangeable WASD section and multi-key rollover support. Its LED illumination adjusts comfortably via shortcuts and without software in the colors red, yellow and green. A pulsating effect, in addition to the illumination intensity, is selectable in which three colors on the keyboard run consecutively. The keys have an operating life cycle of a minimum of 10 million keystrokes. The keyboard connects via a yellow cable with gold-plated USB plug.

The built-in PixArt sensor inside the laser mouse provides up to 3,200 DPI. The green, blue, yellow, purple or red LED illumination adjusts via the DPI switch and each is connected to the five factory preset DPI steps. The mouse has four total buttons; the lift-off distance is 1 to 2 millimeters. Thanks to its symmetrical design, it is suitable for lefthanders. Four PTFE mouse feet ensure outstanding gliding. It also connects via its yellow cable with gold-plated USB plug.

The Sharkoon SHARK ZONE GK15 Gaming Kit is available now from authorized retailers.

Sharkoon expands its range of docking stations and introduces the fastest QuickPort to the product family, which thanks to USB 3.1, offers a data transfer rate of up to 10 gigabits per second.

The Sharkoon QuickPort USB 3.1 Type C is a compact docking station for convenient connection of a SATA hard drive to a PC or laptop. With USB 3.1 support, the QuickPort offers a transfer rate of up to 10 gigabits per second and is backwards compatible to USB 3.0 and USB 2.0. The docking station is suitable for a 2.5" HDD/SSD or a 3.5" hard drive, which slides easily into the drive bay of the QuickPort. Installation is also simple; your operating system recognizes the QuickPort without having to install a driver. If there is no hard drive inserted, a spring-loaded flap protects the inside against dust and dirt. The internal SATA interface of the docking station supports SATA Revision 3.0 and is backwards compatible to previous SATA Revisions. A status LED on the front indicates operation and data transfer. The on/off switch is located on the back, along with the power inlet and USB the USB 3.1 Type C port for connecting to a computer. A USB 3.1 cable (Type A plug to Type C plug) and

a power adapter is included, as well.

Fittingly, Sharkoon also introduces a new expansion card: The Sharkoon USB 3.1 Host Controller Card Type A+C conveniently expands a PC with two USB 3.1 ports. Here, both a Type A port and Type C port are available. Each port provides a transfer rate of up to 10 gigabits per second. The PCIe expansion card supports PCIe 2.0 x2 as well as PCIe 3.0 x1 and is backwards compatible to USB 3.0 and USB 2.0. An internal SATA power inlet provides the necessary power supply. Windows 7, 8 and 10 operating systems are supported.

For gaming pros: The Sharkoon SHARK ZONE MK80 RGB, in a 3-block layout, offers both brilliant illumination and unmatched individuality. Thanks to the premium quality switches from Kailh, the keyboard provides advantages for professional gamers. The other technical details will also leave you impressed: N-key rollover, on-the-fly macro recording, gaming mode, up to five game profiles, onboard memory, integrated media hub with audio and USB connection possibilities plus a polling rate of 1,000 Hz. A total of eight pre-programmed lighting effects, with up to 16.8 million colors, will leave a colorful lasting impression. A comfortable palm rest supports ergonomic gaming, which is of course detachable.

The mechanical Kailh switches promise an average operating life cycle of at least 60 million clicks per key. The MK80 is available with either red, brown or blue switches, each provide different characteristics: Kailh Red has an operating force of 50 g, a linear switch and undetectable switching point and click point. The distance to actuation point is 2 mm. The operating force for Kailh Brown is 45 g, the switch is tactile, the switching point is detectable and the click point is undetectable. The distance to actuation point is also 2 mm. The Kailh Blue offers a precisely detectable click point with a detectable switching point plus tactile switch. The distance to actuation point is 1.9 mm; the operating force is 50 g.

Visually the MK80 is a head turner, even without its installed software. Eight spectacular factory-made lighting effects are pre-programmed, which activate via a simple shortcut. Multicolored wave, pulsating or permanent illumination, an explosion effect or rhythmic illumination to match the music being played can all be selected, for example.

The included gaming software leaves nothing to be desired. In addition to the diverse LED illumination customization of every individual key, macros can be programmed, up to five individual game profiles can be made and appropriate shortcuts with the preferred interaction can be created. Also, key functions can be freely programmed. No customizations will ever be lost thanks to the onboard memory.

The Sharkoon SHARK ZONE MK80 RGB Brown, Sharkoon SHARK ZONE MK80 RGB Red and Sharkoon SHARK ZONE MK80 RGB Blue is now available in authorized retailers.

Design meets functionality: The illuminated SHARK ZONE K20 keyboard not only impresses with its massive appearance but also offers simple operation and easy setup. All features can be conveniently accessed using the keyboard shortcuts and software installation is not needed. With its robust materials, the keyboard housing is completely made from metal, and always promises a stabile platform on the table. In addition, the palm rest contains two nonslip silicone pads, which can be removed and cleaned with water, if necessary. Typical SHARK ZONE: The gaming keyboard connects via its striking yellow cable with gold-plated USB plug.

Individual adjustments to the illumination and color settings are easy thanks to the SHARK ZONE function key. Thus, the background illumination in the colors white, red and blue can be easily adjusted via a simple shortcut. The same applies true to the lighting effect, which cycles through the illumination intensity (50%, 100%, off) and pulsating effect. Likewise via shortcuts, the practical gaming mode with disabled Windows key can be selected. All keys on the keyboard can be locked, if desired. Also, the functions of the WASD keys can be interchanged virtually with the arrow keys.

For convenient use, the keyboard has a total of seven function keys available with preset multimedia actions. With a simple click the media player, web browser and e-mail can all be comfortably launched, for example. The desired volume level can also be easily adjusted.

The Sharkoon SHARK ZONE K20 Gaming Keyboard is available now in authorized retailers.

Stylish appearance: The solid Sharkoon BW9000 ATX Midi Tower scores with its elegant design and impressive functionality. Tool-free installation of nearly all components saves time and allows effortless assembly of individual PC systems. In addition, the BW9000 is well prepared for the installation of professional water cooling systems and offers plenty of space for radiators, bulky CPU cooler and extra-long graphics cards. Three easily accessible dust filters simplify the cleaning process of the system. Two pre-installed 140 mm fans hide behind the minimalist front with mesh elements. A 120 mm fan is pre-installed on the rear panel of the Value version. In the Window version a 120 mm LED fan is pre-installed. The indirect spot lighting of the front panel as well as the acrylic side panel of the Window version underlines the tasteful look of the case. The BW9000-W is available in both black and white. The Value version comes with a closed side panel made from metal and is available in black.

Thanks to the broad dimensions and special design of the case interior, the BW9000 provides lots of room for the installation of various components. Tower coolers with a maximum height of up to 16.5 cm can be installed. Due to the modular hard drive management, graphics cards up to a maximum of 43 cm can be used. The tower offers the possibility to install a total of two radiators for water cooling. The top panel has extra space to attach either a 280 or 360 mm radiator with a total height, including fan, up to 5.5 cm. In the front, a 280 mm radiator with a maximum height of 6.5 cm can be installed. Maximum length for power supplies is 26 cm. Dust filters in the front as well as case bottom are easily removable to facilitate cleaning A dust filter is also installed in the top panel, which can be easily removed thanks to the magnetic fastener. In addition, a useful installation opening for CPU cooler, two water cooling openings and a convenient cable management system with rubberized cable protection is provided.

Two 140 mm fans are pre-installed in the front, on the rear panel of the Value version is a 120 mm fan, while the Window version is equipped with a 120 mm LED fan. Thus, both case versions are already well prepared for powerful yet equally silent cooling of the installed components. To further strengthen internal airflow, the top panel offers space for either up to three 120 mm fans or two 140 mm fans.

End customers will find the Sharkoon BW9000-W (Window version) available from authorized retailers. The Sharkoon BW9000-V (Value version) is also now available.

Sharkoon expands its range of gaming peripherals to a new stereo headset for gamers and presents the SHARK ZONE H30. The robust construction of the SHARK ZONE H30 Stereo Headset combines durability with excellent wearing comfort and passive attenuation of ambient noise. Soft ear pads and a padded headband promises a comfortable fit even during long gaming sessions. Two 40 mm speakers provide balanced sound with deep lows and crisps highs. A solid aluminum capsule optimizes voice transmission with the detachable microphone, which also features a flexible microphone arm.

Ambient noise is effectively reduced thanks to its closed design. Sounds waves are only transmitted in one direction, from headset to user. Also, the broadcasted sound barely leaks out of the H30. Thus, gamers can acoustically insulate themselves from the outside world and concentrate even more precisely on their game.

A solid ear cup suspension made of metal also allows individual adjustments. Height adjustment is made by a screw system and guarantees continuous support without inadvertent changes to the desired settings. The entire design of the H30, including headband, is extremely robust and can withstand high stress.

For universal use, the H30 has a modular cable system with gold-plated connectors and offers two different connection methods. The headset connects to a PC via two 3.5 mm stereo jacks, one for the microphone and the other for the headphones. The total cable length in this setup, including the cable integrated volume control with microphone mute function, is 260 cm and offers generous room to maneuver. For modern connection to a laptop, smartphone or PS4, the H30 provides a 3.5 mm TRRS plug for the microphone and headphone. Total cable length in this setup is 120 cm.

End customers will find the Sharkoon SHARK ZONE H30 Stereo Headset available immediately from authorized retailers.

Now color comes into play: The popular Skiller PRO keyboard has been upgraded with an additional function and now, as the Skiller PRO+, offers for the first time customizable LED illumination in seven colors. With its familiar 3-block layout it features six macros, three profile and nine multimedia keys as well as multi-key rollover support. Individual customizing of LED illumination can be easily made via key combinations or through the gaming software. In addition to the brightness intensity, the preferred illumination can be selected from seven different colors. A pulsating effect as well as automatic color change underlines the versatility of the keyboard.

Using the gaming software, numerous individual programming of key functions in games and other applications can be effortless made. Macros, macro-loops, keystrokes, delay times and internet functions can all be used, for example. Also, the Windows key can be deactivated and the functions of the WASD keys can be interchanged virtually with the arrow keys. Thanks to programmable macros, planned actions in the computer game can be performed even quicker and are conveniently accessible via each assigned macro key. Programming is very easy and, thanks to the on-board memory, individual settings can be used on any PC system. Also, a total of three profiles can be saved within the keyboard and each can be easily activated using a special key. The gaming keyboard connects via its 150 cm long, textile braided cable with gold-plated USB plug.

End customers will find the Sharkoon Skiller PRO+ available immediately from authorized retailers.

Sharkoon expands its product range of midi towers and introduces two new case series at an attractive price. For lovers of minimalist design, the T3 case optically leans toward the popular T9 series. Gamers and fans of flashy cases will enjoy the VG5 series, particularly with its brawny front panel feature.

With a proven design the Sharkoon T3 case series impresses through its ideal functionality, easily accessible controls and modern connectivity options. Thanks to the simple design of the front panel it's best for office PCs or computers in a classic style. Colored power LEDs in the front as well a 120 mm LED fan in the Value and Window version completes the optical details for the entire series. The Standard version comes without any LED fans, which is particularly suitable for an inconspicuous computer. Thanks to the broad side panels, the entire series offers lots of space for installing components. Tower coolers with a height of up to 16 cm, graphics cards up to 38.5 cm (with the middle HDD cage removed) and power supplies up to 25 cm are all able to be installed. The cases provide three externally accessible 5.25" drive bays, two of which are equipped with tool-free installation. Internally, up to three 3.5" hard drives can be easily installed tool-free. Up to three 2.5" HDD/SDDs can be fitted into the middle HDD cage, while there is also space for an additional 2.5" HDD/SDD on the bottom of the case. The Value and Window versions also feature USB 3.0 front ports; the Standard version offers connection via USB 2.0. For an efficient airflow system inside the case, at least one 120 mm fan is located in the front, and depending on the version, up to two fans are pre-installed. Additional fans can be mounted in the front panel to further enhance airflow inside the case. A convenient cable management system as well as a CPU cooler cutout finish off the series. The Standard version is available in black. The Window and Value versions are available, with matching interior painting, in the color versions blue, green and red.

The Sharkoon VG5 series is aimed at gamers and impresses not only through its optical details but also its brawny designed front panel. The black ATX case features in the front two illuminated 120 mm LED fans, two USB 3.0 connection options and easily accessible audio ports. Especially practical: Thanks to the cableless front panel design the panel can be effortlessly removed at any time without having to first detach any cables from the front ports. This greatly simplifies the installation of 5.25" drives. Broad side panels also allow the installation of tower coolers up to 16 cm, graphics cards up to 38.5 cm (with the middle HDD cage removed) as well as power supplies up to 25 cm. The case also has a usable CPU cooler cutout, two water cooling openings, a convenient cable management system and a pre-installed dust filter on the case bottom for the power supply. In addition, the series features two 5.25" drive bays for optical drives, one of which is equipped for tool-free installation. By means of the enclosed 5.25" to 3.5" bay cover and mounting frame, a 3.5" card reader can, for example, be quickly and easily installed into one of the two 5.25" drive bays. Internally, three 3.5" hard drives can be easily installed tool-free. Up to three 2.5" HDD/SSDs can be fitted into the middle HDD cage, while there is also space for an additional 2.5" HDD/SSD on the bottom of the case. Two 120 mm LED fans come pre-installed in the front panel. Additionally, it is possible for another fan to be mounted in the rear panel and, depending on version, also installed on the side panel. The Value version is equipped with blue LED fans. The Window versions are available in the color versions black, blue, green and red with matching interior painting.

End customers will find the Sharkoon T3 ATX case in the Standard, Value and Window versions from authorized retailers. The Sharkoon VG5 case series is also now available in the Value and Window versions.

Sharkoon expands its range of docking stations and introduces two new QuickPort models for beginners who do not want to give up comfort and functionality.

The QuickPort XT Duo Clone is a docking station offering easy connection of up to two SATA hard drives via USB 3.0 to a PC or laptop. Two universal docking slots are provided for either a 2.5" or 3.5" hard drive. The internal SATA interface of the QuickPort supports Revision 3.0 and is backward compatible with older versions. External connection is made via the provided USB 3.0 cable, power supply is through an also included power adapter. One push on the practical Clone button on the back of the docking station is enough to copy all data from one hard drive directly to an empty hard drive. The QuickPort XT Duo Clone can do this independently and does not even need to be connected to a PC.

The Sharkoon QuickPort XT HC offers convenient connection between a SATA HDD via USB 3.0 to a PC or laptop and also offers an integrated two port USB 3.0 hub as well as an included card reader for SD/MMC cards. A USB 3.0 port serves here as a combo port with the card reader. The docking station is suitable for 2.5" HDD/SSD or a 3.5" HDD, which can be easily inserted into the drive bay of the QuickPort. The internal SATA port on the docking station supports SATA Revision 3.0 and is backwards compatible with older Revision versions as well. Connection to a computer occurs via the included USB 3.0 cable. The external interface, thanks to its USB 3.0 support, provides a transfer rate up to 5 Gbit/s. The same transfer rate applies for connected peripherals to the USB 3.0 hub. The integrated card reader connects via USB 2.0.

End customers will find the Sharkoon QuickPort XT Duo Clone available immediately from authorized retailers. The Sharkoon QuickPort XT HC is also available now.

Sharkoon expands its range of USB Hubs and introduces two new external

USB 3.0 models in aluminium housings for a variety of uses. Thanks to

its simple yet elegant design both hubs are suitable as ideal

complements for any PC, especially for high-quality notebooks,

ultrabooks and compute sticks.

The elegant Sharkoon 3-Port USB 3.0 Aluminium Hub + RJ45 Ethernet

Adapter allows comfortable expansion of three additional USB 3.0 ports

to any computer and also has an external network interface card. The

integrated Ethernet adapter provides Gigabit Ethernet and is therefore

well prepared for integration into fast networks. Connection to a PC

occurs via the USB 3.0 cable, a power supply is not required for

operation. Thanks to the enclosed CD with driver and manual, the PC can

simply expand with the network function of the hubs, connection to the

network occurs via RJ45. It’s supported with USB 3.0 SuperSpeed data

transfer rates up to a max. 5 Gbit/s. Therefore, the external hub is

well prepared for the quick and easy connection of external media and is

of course backwards compatible with USB 2.0 and USB 1.1. The integrated

network card provides Gigabit Ethernet with 10/100/1000 Mbit/s and is

ideal for current data transfer rates of modern networks and private

environments. The external hub is available in both black and silver.

The simple Sharkoon 4-Port USB 3.0 Aluminium Hub is also available in

black and silver, offers an additional USB port but forgoes the network

function. Connection is via Plug and Play using the USB 3.0 cable;

driver installation and power supply are not needed for operation. It

also supports USB 3.0 with data transfer rates up to a max. 5 Gbit/s,

and is of course backwards compatible with USB 2.0 and USB 1.1.

End customers will find the Sharkoon 3-Port USB 3.0 Aluminium Hub + RJ45

Ethernet Adapter from authorized retailers. The Sharkoon 4-Port USB 3.0 Aluminium Hub is also available now.

Sharkoon expands its range of input devices and presents the SHARK ZONE M51+ bundle consisting with the new SHARK ZONE M51 Gaming Laser Mouse and equally new SHARK ZONE MB10 Gaming Bungee Hub.

The SHARK ZONE M51 LASER MOUSE comes in a stylish SHARK ZONE design with an illuminated logo and, with its Avago ADNS-9800 laser sensor, is specifically designed for gamers. The rubber coating ensures maximum grip on the mouse, even with ambitious use. The mouse also has LED DPI indicators, 11 programmable buttons, 4-way scroll wheel and weight tuning system. Individual settings such as key settings, mouse speed, color settings and illumination can easily be made via the included gaming software and comfortably saved on the mouse using the onboard memory. The M51 connects via a textile braided cable with gold-plated USB plug.

The accompanying SHARK ZONE MB10 GAMING BUNGEE HUB has a flexible support arm, which optimally guides the cable to the mouse. This allows the gamer to fully concentrate on their game and not be distracted by the cable sliding about. The internal weight of the stand as well as the self-adhesive, anti-sliding pad guarantees a secure hold on the table. The integrated 4-port USB 2.0 hub also allows easy connection of USB devices. Typical SHARK ZONE: Optically, the yellow illuminated MB10 is a real eye-catcher.

End customers will find the Sharkoon SHARK ZONE M51+ Gaming Laser Mouse with MB10 Bungee Hub available now from authorized retailers. The SHARK ZONE MB10 Gaming Bungee Hub is also separately available.

Sharkoon S28 ATX case | Midi-tower in Value and Window versions | USB 3.0 | Cable management system | Tool-free devices installation | 120 mm fan pre-installed

For those who prefer it simple: The black Sharkoon S28 Value ATX case offers a minimalist appearance, without sacrificing functionality. The new midi-tower is available in either a S28 Value, with closed side panel, and a S28 Window, with acrylic side panel, version. The S28 also offers a variety of possibilities for the installation of components. The modular hard drive cage allows the use of extra-long graphics cards up to 41.5 cm. If equipped with the maximum amount of hard drives, the case offers space for graphics cards up to 32.5 cm in length. Thanks to its generous width of 21 cm, tower coolers with a height of up to 17 cm can be easily installed. The cable management system ensures discreet wiring of the built-in hardware.

In the front, there are already two quiet 120 mm fans behind the designed air intakes. In the back of the case a quiet 120 mm fan is pre-installed. Thus, the S28 is well prepared for the optimal cooling of high-performance components. The front panel provides two USB 3.0, two Audio and two USB 2.0 ports. If the installed mainboard does not have a USB 3.0 port, the USB 3.0 ports can also operate in USB 2.0 mode

The case features two 5.25" drive bays for the tool-free installation of optical drives. Up to three 3.5" hard drives as well as four 2.5" HDD/SDDs can be comfortably mounted using the enclosed rails. An additional 2.5" HDD/SSD can be mounted on the case bottom.

The Sharkoon S28 Value ATX case is now available from authorized retailers. The Sharkoon S28 Window, with acrylic side panel, is also now available.

For further questions, to request samples and/or photos, or other information please contact us.

Sharkoon expands its range of gaming keyboards and presents the SHARK ZONE K30 Illuminated Gaming Keyboard. The keyboard comes in a 3-block layout with typical SHARK ZONE design, white LED illumination and an integrated palm rest. The illumination can be adjusted in several steps directly on the keyboard, even without the installed gaming software. To run macros and/or start profiles, the K30 provides five practical macros as well as three profile keys.

The K30 is programmed by means of the enclosed gaming software. Especially practical is that five game profiles can be activated, which are executed automatically as soon as the desired game starts. Additionally provided are programmable mouse actions and individually configurable key functions, which can be easily adjusted in the gaming software. Thanks to the onboard memory all customizations are saved in the keyboard.

Multimedia applications can be comfortably used through the function keys with preset multimedia actions. Gamer types are offered an optimized multi-key rollover support as well as a maximum polling rate of 1,000 Hertz. Connection occurs via a gold-plated USB plug in SHARK ZONE optics.

End customers will find the SHARK ZONE K30 Illuminated Gaming Keyboard available the end of June from authorized retailers.

Sharkoon expands its range of external drive enclosures and presents a variant for the new USB 3.1 standard: The QuickStore Portable USB 3.1 provides an elegant dwelling for a 2.5" SATA HDD/SDD. The internal controller supports the SATA Revision 3.0 and is backward compatible to Revision 2.0 and 1.0. External connection occurs via a micro-B port. The USB 3.1 case supports Windows 8 UASP and offers a maximum transfer rate of 10 gigabits per second.

Disks with a height up to 9.5 mm can be installed. Assembly is completely tool-free and is done within a few simple steps. To do this, the case frame can be simply unlocked and slid open. With the black, brushed aluminium cover, the QuickStore Portable USB 3.1 visually impresses. A blue LED also indicates operation and data transfer. The hard drive case measures a compact 134 x 85 x 14 mm (L x W x H) and weighs only 51 grams. Packaging includes short instructions as well as a USB 3.1 cable (type-A plug to micro-B port).

Additionally, Sharkoon presents the USB 3.1 Host Controller Card with a suitable PCIe expansion card for PCs. The card supports PCIe 2.0 and PCIe 3.0 plus is available with two external USB 3.1 connectors (type-A ports). The maximum transfer rate amounts to 10 Gbit/s. The Host Controller Card allows easy connection of USB 3.1 devices to a PC and is also backward compatible to USB 3.0 and USB 2.0. Windows 7 and Windows 8 operating systems are supported. Packaging includes a CD with needed drivers and a PDF manual.

End customers will find the Sharkoon QuickStore Portable USB 3.1 available from authorized retailers. The Sharkoon USB 3.1 Host Controller Card is also now available.

The illuminated SHARK ZONE H40 Gaming Stereo Headset is specifically designed to meet the demands of gamers. The yellow LED illumination of the SHARK ZONE logos on the outside of both ear cups underlines the trendy design of the series. It persuades with its padded, adjustable headband; lightweight design of only around 350 grams and generous, soft earpieces: The H40 provides excellent comfort during wear, especially during long gaming sessions. Thanks to the metal reinforcing headband it is very sturdy and can withstand high stress.

Two professional 50 mm premium speakers provide superior sound with penetrating bass and crystal clear highs. The H40 was specifically designed to meet the sound demands of gamers, so no game deciding details were overlooked. Through the ergonomically designed in-line controller, which is even sleeker on the SHARK ZONE designed connection cable for an easier hold, the volume and microphone mute function can be easily controlled.

The side-mounted microphone arm is fully customizable and is smoothly integrated into the design. With the microphone's LED indicator, the selected operating mode is displayed at all times. Is the microphone activated? As soon as it is activated, it is illuminated yellow. It's no longer necessary for gamers to check the status of the microphone by looking at the in-line controller; they can now fully concentrate on what is happening on the game.

The SHARK ZONE H40 Gaming Stereo Headset connects via two gold-plated 3.5 mm stereo jacks, each for the microphone and headphones, as well as a gold-plated USB plug in SHARK ZONE design for the illuminating function. The 2.5 meter long cable also offers a lot of roaming ability for the gamer. Included is a useful transport bag to use for the next LAN party.

Sharkoon expands its range of computer power supply units under the SilentStorm SFX brand and presents two new SFX power supply unit series with "80 PLUS Gold" and "80 PLUS Bronze" certification. They offer the highest efficiency in a compact design for powerful computers such as multimedia or mini-PCs. With the included ATX mounting frame, the power supplies can be used in standard ATX cases.

The SilentStorm SFX Gold 500W is an "80 PLUS Gold" certified SFX power supply for high demands. It offers outstanding efficiency of over 90 percent by 50 percent load and meets the strict requirements of the independent 80 PLUS Initiative "PLUG LOAD SOLUTIONS". The compact dimensions total to only 130 x 125 x 63 mm. Thanks to the modular cable system the only cables used are those needed in the PC. For the setup of modern systems there is a 500 Watt power supply with two 6+2 pin PCIe power connectors for high-performance graphics cards. In addition to the CPU and mainboard standard connectors the SFX power supply offers four SATA, two IDE and a floppy power connector. It is compatible with Intel HASWELL CPUs. The operating noise of the power supply is effectively reduced by means of a quiet 120 mm fan and is especially suitable for lovers of Silent PCs that do not want to miss out on a powerful power supply. The SilentStorm SFX Gold 500W features over current, over temperature, over power, over voltage, under voltage and short circuit protection. The guarantee period is three years. The Sharkoon SilentStorm SFX Gold 500 Watt is available in authorized retailers.

The SilentStorm SFX Bronze is available in 350 Watt and 450 Watt. The series is "80 PLUS Bronze" certified and is best for users looking for the best price-performance. It offers outstanding efficiency of over 85 percent under 50 percent load and meets the strict requirements of the independent 80 PLUS Initiative "PLUG LOAD SOLUTIONS" for the Bronze certificate. The compact dimensions are only 130 x 125 x 63 mm (L x W x H). The Intel HASWELL compatible power supply series in the 350 Watt version provides, in addition to the standard CPU and mainboard connectors, a 6-pin PCIe connector, two SATA, two IDE and a Floppy connector. The SilentStorm SFX Bronze 450 Watt also offers an additional SATA connector as well as a 6+2-pin PCIe connector. The internal power supply components of the SilentStorm SFX Bronze series are cooled by an effective 80 mm fan. The power supplies feature over power, over voltage, under voltage as well as short circuit protection. The guarantee period is three years. The Sharkoon SilentStorm SFX Bronze series is available in authorized retailers.

The trendy SHARK ZONE C10 Mini-ITX PC Case is aimed at gamers and offers maximum flexibility within the smallest of space. With its compact dimensions of only 37.0 x 22.5 x 18.0 centimeters (L x W x H), it is ideal for mobile and space-saving use at your next LAN party. The case can be used not only horizontally, but vertically as well. Inside the case dual-slot graphics cards with a maximum length of up to 31.5 cm can be installed, and is available with a 5.25" drive bay for an optical drive and installation options for a 3.5" hard drive or a 2.5" HDD/SDD. Without the 5.25" drive bay, up to two 3.5" hard drives or two 2.5" HDD/SSDs can be installed. An additional 2.5" HDD/SDD can be mounted on the rear panel, instead of an 80 mm fan. CPU coolers with a maximum height of up to 15 cm can be used. The case has a convenient installation opening to easily mount fans. A quiet 120 mm fan is pre-installed at the top and, if needed, an additional 120 mm fan can also be mounted. If no optical drive is installed, the top also has room for a 240 mm radiator. All side panels are equipped with dust filters and offer ventilation openings. An 80 mm fan can be installed to the rear panel. The front features two USB 3.0 and Audio ports. Practical thumbscrews simplify the opening as well as closing of the case. The SHARK ZONE C10 is compatible with SFX and non-modular ATX power supplies.

The elegant QB ONE Mini-ITX PC Case offers more than enough space for all the necessary components thanks to its carefully planned layout. Its dimensions are a compact 36.8 x 22.5 x 18.0 centimeters (L x W x H). The elegant design is recommended for use in the living room as, for example, a powerful gaming PC with use in a vertical or horizontal position. All side panels offer generous ventilation openings with dust filters and thumbscrews. An optional 80 mm fan can be mounted to the rear panel. A 120 mm fan is pre-installed at the top and, if needed, an additional 120 mm fan can also be mounted. If no drive is installed, the top also has room for a 240 mm radiator. In the front, two USB 3.0, two USB 2.0 and two Audio ports are provided. Installation of a dual-slot graphics card, up to two 3.5" hard drives or two 2.5" HDD/SSDs as well as a 2.5" HDD/SSD instead of an 80 mm fan is possible in the rear panel. CPU coolers with a maximum height of up to 15 cm can also be mounted. The QB ONE Mini-ITX PC Case is also compatible with SFX and non-modular ATX power supplies.

End customers will find the Sharkoon SHARK ZONE C10 available from authorized retailers. The Sharkoon QB ONE Mini-ITX PC Case is also available.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Perfect for beginners: The low-priced RUSH ER1 Gaming Stereo Headset features 40 mm drivers and offers a pivoting microphone plus cable integrated volume control, including microphone mute function. The stylish design of the headset is aimed specifically at gamers.

Soft ear pads and a padded headband guarantees a comfortable fit, even during long gaming sessions. The circumaural headset in a closed design is suitable for PC gaming, multimedia and voice applications, for example TeamSpeak. The ER1 connects via two 3.5 mm stereo jacks, each respectively for microphone and sound.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

The Skiller PRO Illuminated Gaming Keyboard is the latest version of our popular Skiller keyboard and offers in the Pro version even more features for gamers. The blue illuminated keyboard in a 3-block standard layout, including multi-key rollover support, also offers six macro, three profile as well as nine multimedia keys. The stabile keyboard has a weight of about 888 grams; the lifetime of the keys is over 10 million keystokes.

With the included software individual programming of the keys can be easily made. For example, macros, macro-loops, keystrokes, delay times as well as media, internet and mouse functions can all be used. Furthermore, the Windows key can be disabled and the functions of the WASD keys can be interchanged with the arrow keys.

Planned actions can be performed in the game even faster through the conveniently accessible macro key. Programming is very easy and thanks to the on-board memory individual settings can be used on any PC system. In addition, three individual profiles can be stored in the keyboard and each can be activated by a special key. Also customizable is the backlight illumination: By 10 percent increments up to the maximum brightness, breathing mode or completely deactivated. A total of nine multimedia keys provide a more comfortable use of various Windows functions, such as volume control or play/pause.

The keyboard connects via its 150 cm long, textile sheathed cable with a gold-plated USB plug. Packaging includes a set of anti-sliding rubber stands.

End customers will find the Sharkoon Skiller PRO Illuminated Gaming Keyboard available from authorized retailers.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Sharkoon expands its range of inexpensive cases and introduces a new series for beginners. The VG4 series was especially designed for the visual demands of gamers and stands out due to its versatile features at an attractive price. The ATX case offers Standard, Value or Window versions. The latter has an acrylic side window and is available in four different interior finishes (black, green, blue, red) with matching LED fans. In the black version, the fans are blue illuminated.

The cases are compatible with mini-ATX, micro-ATX as well as ATX and each have a weight of around 3.5 kg. The dimensions are 445 x 200 x 430 (L x W x H). On the front of the Value and Window versions there are two USB 3.0, two USB 2.0 and two Audio connection options. The Standard version is equipped with four USB 2.0 and two Audio connection options.

Thanks to the provided side panels, tower coolers with a height of up to 16 cm can be installed. Graphics cards with a maximum length of up to 31 cm, after removing the SSD hard drive cage up to 38.5 cm, can also be mounted. A total of up to seven expansion cards can be installed. The maximum length for power supplies is 25 cm; a suitable dust filter is pre-installed on the bottom. All cases in the series offer an installation opening for a CPU cooler, two openings for optional water cooling as well as a comfortable cable management system.

A 120 mm fan and provided dust filter are pre-installed in the front of all versions. In order to further strengthen the air flow inside the case, two additional 120 mm fans can be optionally mounted on the side panel of the Value and Standard version. In the rear panel of the Value version is a 120 mm fan pre-installed, it is optional in the Standard version. The Window version is equipped with two LED fans, a fan in both the front and rear panel.

The collective series offer three 5.25" drive bays for optical drives (two or which are equipped with quick fasteners). Internally, three 3.5" hard drives can be installed using the quick fasteners. In the second mounting frame can three 2.5" HDDs/SDDs be installed, in the bottom of the cases there is space for an additional 2.5" HDD/SDD.

The Sharkoon Vg4 series is available in the versions Standard (VG4-S), Value (VG4-V) or Window (VG4-W) from authorized retailers.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Sharkoon expands its range of gaming peripherals and introduces with the SHARK ZONE a series specifically designed for gamers. The products share a distinctive black and yellow design plus familiar high Sharkoon quality with well-known, attractive price-performance ratio. First launched are the H10 Gaming Headset, the M20 Gaming Mouse as well as the P40 Mouse Mat. Additional products will follow.

The SHARK ZONE H10 Gaming Stereo Headset comes in a closed design with a cable integrated volume control, including microphone mute function. Thanks to the powerful 40 millimeter driver, the H10 offers premium gaming sound specifically for gamers. The pivoting and flexible microphone is especially optimal for voice applications, such as TeamSpeak. Thanks to the padded headband as well as the soft, circumaural ear pads the H10 provides excellent comfort during wear, especially during long gaming sessions. The H10 connects via two gold-plated 3.5 mm stereo jack connectors. The cable length is 2.5 meters. For the transport to the next LAN party, a bag is also included within the packaging. The H10 gaming stereo headset is now available from authorized retailers.

The SHARK ZONE M20 Gaming Mouse was designed specifically for the high demands of modern computer games and also appeases with its unique appearance. The left and right mouse buttons are equipped with high-quality Omron switches and guarantees a long service life. With the revolutionary third mouse button, which operates comfortably with the ring finger, gives players a clear advantage: Thanks to being freely programmable, the desired action is even faster, accessible and executed. In addition, the M20 is equipped with an optical sensor, which offers up to 3200 DPI. All nine mouse buttons are freely programmable via the included configuration software. Using the internal memory, the individual settings can be used on any PC system without any further software installation. Through the comfortable weight tuning system, the mouse weight can also be customized to the individual. Connection occurs via a gold-plated USB plug with a SHARK ZONE design. The stylish LED illumination of the M20 as well as the yellow, textile sheathed cable looks good no matter where you are. The gaming mouse is now available from authorized retailers.

The SHARK ZONE P40 Mouse Mat meets the demands of professional gamers. The extremely durable textile surface ensures minimal start and frictional resistance, and provides the best sliding properties for maximum precision with any mouse type. The rubber bottom is used as an adhesive and prevents unintentional movement of the during use. Additional advantage of the flexible material: The P40 can be easily rolled or folded for transport. With dimensions of 355 x 255 x 2.5 mm, the mouse mat provides ample space to operate your mouse perfectly. The DurableStitch sewing around the edges prevents fraying around the mouse mats surface and ensures unmatched longevity. The P40 Mouse Mat is now available in authorized retailers.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

The CA-I Mini-ITX PC Case is an elegant aluminum mini-tower in a compact design. Thanks to its elaborate compartmental layout the mini-ITX case offers a surprising amount of space for the installation of components and, in addition, uses conventional ATX power supplies (maximum length of up to 18 cm). The dimensions are 213 x 225 x 259 mm (L x W x H). The minimalist case consists of a lightweight aluminum body (weight: 1.5 kg), in which an expansion or dual-slot graphics card can be installed. Maximum length of the graphics card can be 20.7 cm; the CPU cooler can be up to 10.5 cm tall. A 120 mm fan is pre-installed on the top. An optional 60 mm fan can be mounted on the back. The front offers two USB 2.0 as well as two audio ports for quick access in connecting peripheral devices. On the top are also two USB 3.0 ports (internal 19-pin mainboard connector). The CA-I offers room internally for a 3.5" hard drive and a 2.5" HDD/SDD or two 2.5" HDDs/SDDs, which can be installed in the bottom of the mini-tower. The CA-I is now available in either the colors black and silver from authorized retailers.

The slightly larger CA-M Micro-ATX PC Case is compatible with micro-ATX as well as mini-ITX, and offers nearly identical features but also the possibility to install up to four expansion cards. The dimensions are 270 x 225 x 285 mm (L x W x H), weight is 1.8 kg. Maximum length of the graphics card can be 25 cm; the power supply can be up to 23 cm long. It also offers room internally for two 3.5" hard drives or three 2.5" HDDs/SSDs, which can be installed in the bottom of the mini-tower. The CA-M Micro-ATX PC case is now available in either the colors black or silver from authorized retailers.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

The minimalist VS4 series is ideal for both home and office PCs and stands out due to its versatile features at an attractive price. The all-black ATX cases with a black interior finish are compatible with mini-ITX, micro-ATX as well as ATX, weigh 3.5 kg each, and are available in a Standard, Value or Window version. Dimensions are 445 x 200 x 430 mm (L x W x H).

In the front of both the Value and Window version there are two USB 3.0 and two audio ports. The Standard version provides two USB 2.0 and two audio ports. Thanks to the provided side panels the entire VS4 series offers space for the hassle-free installation of tower coolers with a height of up to 16 cm. Graphics cards with a maximum length of up to 31 cm, up to 38.5 cm after removing the SSD hard drive cage, can also be installed. A total of up to seven expansion cards can be installed. The maximum length for power supplies is 25 cm; a suitable dust filter is pre-installed on the bottom. All cases in the series offer installation openings for a CPU cooler, two openings for water cooling as well as a comfortable cable management system. The Window version is available with an acrylic side panel.

A 120 mm fan and provided dust filter are pre-installed in the front of all versions. In order to further strengthen the air flow inside the case, two additional 120 mm fans can be mounted on the side panel of the Value and Standard version. On the rear panel of the Window version, an additional 120 mm fan in pre-installed; it is optional for the Standard and Value version.

The entire series offers three 5.25" drive bays for optical drives (two of which are equipped with quick fasteners) or two 5.25" drive bays and an externally accessible 3.5" bay. Internally, three 3.5" hard drives using the quick fasteners can be installed. In the second mounting frame can three 2.5" HDDS/SDDs be installed, in the bottom of the case there is space for an additional 2.5"HDD/SDD.

The Sharkoon VS4 series is available in the versions Standard (VS4-S), Value (VS4-V) or Window (VS4-W) from authorized retailers.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Sharkoon has expanded their range of gaming peripherals and presents a low-priced mouse for beginners. The SHARK Force Gaming Mouse comes in a stylish, minimalistic design as well as the trendy colors white, green, pink or black.

The new addition features a high precision optical sensor with a maximum 1600 DPI and 4000 FPS. DPI settings from 600, 1000 up to 1600 on the mouse can be adjusted using the three-level DPI button. The DPI level is displayed based on the brightness of the illuminated DPI sensor. The minimalistic and ergonomic design of the SHARK Force offers, thanks to the rubberized surface, optimal hold and always remains securely in hand. The SHARK Force also offers a precise, convenient scroll wheel. Thanks to the four mouse feet made of PTFE, the mouse slides with minimal resistance over the respective mouse pad. The heavy 160 gram mouse is connected to a PC via a textile sheathed 180 cm long cable with gold plated USB connector. The SHARK Force supports the operating systems Windows XP/Vista/7/8. Extra mouse feet are included in shipping.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com

The Sharkoon BD28 is a tailored gaming ATX case in a brawny design, which is available in the exterior colors black and gunmetal. With the black version, the colors red, blue or green can be selected for the interior finish with the front LEDs and case fans also illuminating in the corresponding color. The gunmetal edition is available with two blue LED fans and a black interior finish. The provided acrylic side panel provides insight into the inner workings. Thanks to the issued side panels and its 235 mm width, installation of very large tower coolers with a maximum height of 179 mm is ensured. Extra-long graphics cards of up to 415 mm can also be installed due to its modular hard drive management. While fully equipped with the maximum number of 2.5" hard drives/SSDs the case still offers enough space for VGA cards up to 325 mm.

A low-noise 120 mm fan is pre-installed behind the massive mesh front and also in the back of the BD28. In addition, it offers flexible fan installation possibilities with either two 120 mm, two 140 mm or one 180 mm fans can be mounted on the top with a dust filter. An additional 120 mm fan can be installed in the front.

Two USB 3.0, two USB 2.0 as well as two audio ports in the front offers fast access for the connection of peripheral devices. In the event that the mainboard does not have an internal 19-pin USB 3.0 connector, the USB 3.0 ports can also optionally be used in USB 2.0 mode.

The case offers two 5.25" drive bays for the screwless installation of optical drives. A 5.25" adapter is included for the installation of card readers or other devices in 3.5" format. Up to three 3.5" hard drives as well as four 2.5" hard drives/SSDs can be mounted without screws using the rail system and included rails. Additionally, if needed, another 2.5" hard drive/SSD can be attached to the case floor. For orderly cabling the BD28 offers a cable management system. Lastly, it offers an installation opening for a CPU cooler and two openings for water cooling.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com

Sharkoon expands its range of energy-efficient power supplies with their new WPM BRONZE series. The new series complies, with an efficiency of over 85 percent by 50 percent load as well as over 82 percent by 20 percent and 100 percent load, with the stringent requirements of the "80 PLUS BRONZE" certification.

The WPM BRONZE series also offers, in addition to its high efficiency, the latest ATX V2.3 standard. Like the recently introduced WPM V2 power supply series, the BRONZE version also provides a cable management system, which features two PCIe cables, each with one 6+2-pin connector for graphics cards. In addition, the WPM Bronze provides a cable with three 4-pin peripheral device connectors, a cable with two 4-pin peripheral device connectors and a floppy connector as well as two SATA cables with three 15-pin connectors, respectively. Therefore, the only cables used are the ones needed to install the desired PC components. This not only ensures an orderly case but also improves internal airflow.

WPM BRONZE power supplies are cooled by a quiet 140 mm fan, which provides a strong airflow at a lower revolution speed, effectively reducing operating noise. The standby power consumption is a maximum 0.3 Watt.

The WPM BRONZE power supplies are available in 400, 500, 600 and 700 Watt. Packaging includes a power cable, a set of modular cables, an instruction manual, mounting screws and a cable bag.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com

Sharkoon introduces with the new WPM V2 series the successor to the popular WPM power supplies. The WPM series in Version 2 has an efficiency of over 80% and meets the latest ATX V2.3 standard. Also new is the revised modular cable management system, which now offers two PCIe cables with a 6+2 pin connector for graphics cards. For the first time, the V2 is available in 700 watts; the predecessor was available with a maximum of 600 watts. In addition, the WPM V2 includes a cable with three 4-pin peripheral device connectors, a cable with two 4-pin peripheral device connectors, a floppy connector as well as two SATA cables, each with three 15-pin connectors. Thus, it is possible for the user to only install the cables needed for their PC components. This not only ensures order within the case, but also improves internal airflow.

WPM V2 power supplies are cooled by a quiet 140 mm fan operating at low speed and corresponding low noise volume, while ensuring high airflow. The standby power consumption is a maximum 0.3 watts.

The WPM V2 power supplies are available with 400, 500, 600 and 700 watts. Packaging includes a power cord, a set of modular cables, a manual, mounting screws and a cable bag.

End customers will find the Sharkoon WPM Power Supply V2 available for the suggested retail price starting from 39.99 euros in authorized retailers.

In 2011, Sharkoon introduced an ATX case at a competitive price with the Vaya model. Now, with the Vaya II Midi ATX PC case, the manufacturer presents the revised successor to the popular case.

Like its predecessor, the Vaya II offers various features at a fair price-performance ratio. The new version, with the dimensions of 470 x 205 x 437 mm (L x W x H), is available in the colors black and gunmetal (Value Version). The interior has a black finish. Thanks to the provided side panels, the Vaya II offers more room for easy installation of tower coolers with a maximum height of up to 16.5 cm. Graphics cards with a length of up to 26.5 cm also have room. Maximum length for a power supply is 28 cm, which can be installed on the case floor, which includes a pre-installed dust filter. For cooling, a blue 120 mm LED fan with a mesh look is already pre-installed. Optionally, an 80 mm or 120 mm fan can be installed in the back panel. In addition, the Vaya II offers installation openings for CPU coolers, three openings for water cooling as well as a cable management system.

The Vaya II also features four 5.25” drive bays for optical drives and an externally accessible 3.5” drive bay. Internally, four 3.5” hard drives can be mounted. Additionally, a 2.5” SSD/HDD can be installed on the case floor. Both the locking of optical drives and hard drives occur through our quick fasteners.

The Value Version of the Vaya II provides two USB 3.0 (internal 19-pin mainboard connector) as well as two audio ports on the front, an acrylic side panel and available in the colors black and gunmetal for the suggested retail price of 34.99 euros. In contrast to the Value Version, the Standard Version features USB 2.0 ports, a closed side panel with a fan mounting option and is available in black.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Sharkoon expands its range of products for computer enthusiasts and introduces the Shark Blades fan series in four different color variations. The 120 mm silent fan, measuring 120 x 120 x 25 mm (L x W x H), has a fan speed of 1000 revolutions per minute, with a maximum flow rate of 56 m³/h. The Shark Blades are equipped with a quiet 12 volt motor with a durable hydrodynamic bearing, which is designed for an average life span of up to 50,000 hours.

Special fan blades in the shark fin design not only provide an interesting 3D effect during fan use, but also stable airflow with reduced air resistance, thus preventing turbulence. Also, the fan blades are arranged precisely on the wheel, in order to prevent the slightest bit of vibration.

Delivery includes a set of rubber bolts for decoupled and screwless installation. The fan is connected via the 50 cm long, textile-coated cable, with 3-pin plug for a temperature-sensitive control of the mainboard. Also included is a power supply adapter (3-pin to 4-pin power connector) and screws. The Shark Blades are available in the colors black/yellow, black/red, black/blue and black/green.

A novel construction allows the installation of a 120 mm or 240 mm water cooling radiator in the top of the case. Thus, the midi tower is well prepared for space-saving installation of high-performance water cooling systems.

Externally, the 6 kg case differs only slightly from the well-known REX series, the internal structure, however, was completely revised. Only micro-ATX mainboards can be installed, thus, the Rex Water Cooling Edition wins additional mounting space for large radiators.

For the alternative installation of an air cooler, thankfully nothing will stand in the way of a tower cooler with a width up to 205 mm and a maximum height up to 165 mm. A tinted acrylic window provides insight into the housing interior and the installed components. Order is ensured through a cable management system.

The Rex Water Cooling Edition has, unlike traditional mATX cases, five slots for expansion cards. Up to two dual-slot graphics cards with a maximum length of up to 40 cm can be installed. The front bezel is mesh. Located behind it are two 120 mm Low Noise blue LED fans. An additional 120 mm LED fan is preinstalled on the back of the case. Optical drives can be installed without screws in the two available 5.25" drive bays. Furthermore, up to three 3.5" hard drives or 2.5" hard drives/SSDs can be mounted in the HDD rack system. A panel containing a mounting frame for card readers is also included. The case offers a total of six USB ports in the front panel: two USB ports on the top and four USB 2.0 ports in the front. Headsets and speakers can be comfortably connected via the two audio connections.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

The headset provides rich sound due to its high quality workmanship and thanks to the 53 millimeter premium speakers.

The lightweight, 325 gram GSone was specifically designed to meet the requirements of PC gamers. The ergonomic design, sturdy yet lightweight material characteristics and the padded, individually adjustable headband of the GSone ensures a good fit on a variety of different head shapes. The ear pads are circumaural in design and feature extra-large cushions. This results in less outside noise being perceived, while enhancing the overall wearing comfort. The gamer can thus concentrate on their game or communicating with their team. The volume can be easily adjusted by use of a dial on the right ear cup.

The flexible and robust microphone is especially designed for voice applications such as, for example, TeamSpeak. The microphone self-mutes by simply folding up the microphone arm (Tilt-up Mute). The Sharkoon GSone connects through a 250 cm long, textile-sheathed cable with two 3.5 millimeter stereo jack, for the headphones and microphone, respectively.

For further questions, to request samples and/or photos, or other information please contact us or got to

www.sharkoon.com

The cases are nearly identical and differ mainly in just the optics.

True to the motto "Save on space - not on possibilities!" the cases in the series provide, despite their compact size of 415 x 185 x 360 millimeters, space for up to eight hard drives/SSDs, which can be decoupled installed. In addition, graphics cards up to 340 millimeters in length as well as CPU coolers with a maximum height of 165 millimeters can be installed. The cases contain two 5.25" drive bays and a 3.5" drive bay. Pre-installed is also a Sharkoon BayExtension. Through this special installation frame up to four additional Solid State Disks can be attached. Two pre-installed fans, a 140 mm fan in the front and a 120 mm in the rear of the case ensure continuous air flow. Removable dust filters are located on the front and lower ventilation openings. In the versions without a window, an optional fan on the side panel can be installed.

On all the cases the front I/O offers two USB 3.0, two USB 2.0 and two audio ports. The two USB 3.0 ports are connected via a 19-pin mainboard connector and also provide an alternative USB 2.0 connector, ensuring backward compatibility with older mainboards. The front panel design of the series is completely cable-free. The panels can be removed at any time, without having to detach any cables. This simplifies the installation of external 5.25" or 3.5" drives. Optical drives are mounted with quick-release fasteners, or optionally screwed in.

The biggest difference between the four mini towers is their various designs. The MA-A1000 with its closed front comes in pure Alu-optic. The MA-I1000 is equipped with vents, behind which a blue 140 mm LED fan is installed. For lovers of classic mesh design, the MA-M1000 with its blue LED fan is recommended. Also with a mesh front and blue illumination is the MA-W1000, which has an Alu-optic finish in the front and fitted with an acrylic side panel.

For further questions, to request samples and/or photos, or other information please contact us or go to www.sharkoon.com.

Sharkoon expands its entry level PC headset series. The new Sharkoon Rush Core stereo gaming headset comes in a black/white design and is aimed at price-conscious gamers.

Due to the enclosed ear cup design ambient noise is reduced. The built-in speakers have a diameter of 40 mm and a maximum power of 150 milliwatts. The headband and earpieces are padded to ensure a comfortable fit during wear. In addition, it also features a swiveling, flexible microphone, which can be pivoted into the desired speaking position. The volume control is integrated into the 250 centimeter long cable and offers the possibility to completely mute the microphone. It is connected by means of two 3.5 mm stereo jacks, for the headset and microphone, respectively. The headset is ideal for games as well as other voice and multimedia applications. A transport bag is also included with the headset.