The 8-Bay RAID Station is an external enclosure for eight SATA hard drives, which support the memory modes Clean/Single, Large, Clone as well as RAID 00, 30, and 50.
The case of the RAID station consists of solid SECC steel, the front door from ABS plastic. Behind this hides the hard drive mounting frame, in which hard drives in 2.5" or 3.5" format can be screwed into. The mounting frame itself is simply inserted into the housing and locked.
The configuration of the RAID modes is done quickly and easily through the DIP switch located on the backside of the case. The USB3.0 and eSATA interface is also located here, through which the RAID station can be attached to compatible devices. An appropriate cable is also included in shipping, including the necessary screws needed for installing the hard drive.
Regardless of whether it’s a private media collection or the data storage for a small office environment, with the 8-Bay RAID Station it’s always on the safe side!

General
External Interface:
USB 3.0, eSATA
Internal Interface SATA:
2.5", 3.5"
Drive Bays:
8
Supported RAID Modes:
Clean/Single, Large, RAID 00, 30, 50
Chip:
JMicron JMB394, JMB 539B
Power Supply:
Internal
Max. Data Transfer Rate USB:
5 Gbit/s
Max. Data Transfer Rate eSATA:
3 Gbit/s
Sleep Mode:
After 30 Minutes
On/Off Switch:
Status LED:
Cooling:
1x 120 mm fan
USB Cable Length:
120 cm
eSATA Cable Length:
120 cm
Weight:
6.5 kg
Dimensions (L x W x H):
340 x 150 x 340 mm
Compatibility
Max. Height 2.5" HDD:
15 mm
SATA Compatibility:
Revision 1.0, 2.0, 3.0
Max. HDD Capacity:
8x 8 TB
Supported Operating Systems:
Windows 7/8/10
Package Contents
8-Bay RAID Station
Power Cord
USB Cable
eSATA Cable
8x Hard Drive Mounting Frame
Set of Mounting Screws
Manual
Note
If more than one hard drive is addressed in Single Mode via eSATA, port multiplier must be supported by controller.
EAN Code
4044951012916
Manual
Product Info
Manual