The M25 Silent PCGH Edition is the second PCGH PC case from Sharkoon und PC Games Hardware. Thanks to the damping mats in the front, side and top panels, this case sets itself apart from it predecessors and is especially quiet - despite a good airflow through large fans. Nevertheless, there is still plenty of room inside the case for large components. The elementary front panels with their mesh trims make this a suitable case for any gaming setup and a perfect fit in any office.
Nice and Quiet. The M25 is a straightforward case which is characterized, above all, by its inner worth: In contrast to its predecessors, this case comes with damping mats in the side and front panels, making it considerably quieter. The top panel has been closed up and is also equipped with a damping mat. In total, the noise level is thus reduced by up to 30 percent.
Everything Tidy. The special construction of the inside of the M25 Silent offers a wide range of possibilities for installing different kinds of components. The cabling allows itself to be easily integrated in the tunnel, inside of which the power supply and up to three 3.5" data storage drives will find room.
Optimal Airflow. The M25 Silent is designed to allow a cool flow of air to be distributed into the inside, while the warmth is conveyed outward through the back of the case. A 140 mm fan is pre-installed behind the front panel, and on the rear panel there is 120 mm fan. As an option, a second 140 mm fan or a radiator can be installed at the front panel. Integrated dust filters protect the installed components from dust and dirt.
Generously Spacious. The optimal design of the inside of the M25 Silent enables the installation of power supplies with a length of up to 20.5 cm. Graphics cards with a maximum length of 40 cm can also be installed as well as CPU coolers with a height of up to 16.7 cm.
Variable Installation Possibilities. For plenty of data storage, the M25 Silent has various installation possibilities for different kinds of drives. The case offers two 5.25" drive bays for optical drives. Alternatively, the supplied 5.25" front cover with a 3.5" opening enables one of the bays to be used for the installation of a card reader. In the tunnel at the bottom of the case, up to two 3.5" drives - or two 2.5" drives - can be mounted in the HDD/SSD cage. Another 3.5" HDD can be mounted directly on the bottom panel. There are two locations behind the mainboard tray and another two on top of the tunnel for the installation of 2.5" HDD/SSDs.
- Mini-ITX, Micro-ATX, ATX
- Max. Length Graphics Cards
- 40.0 cm
- Max. Height CPU Cooler
- 16.7 cm
- Max. Length Power Supply
- 20.5 cm
- Max. Height Radiator incl. Fan (Front)
- 5.5 cm