SGC1 – The SKILLER Command Center
Sharkoon broadens the specifically designed for gamers SKILLER series with a PC case, which does much more than just visually flex its muscles: the SKILLER SGC1 ATX PC Case, with its striking front fins plus numerous design elements, is a perfect addition to the SKILLER series. The black background of the PC case creates a harmonic contrast to the LED illumination of existing peripherals. As prominent as the SGC1 is presented externally, so tidy it is on the inside: no matter if it is the cable management system, practical oval hole cutouts or sophisticated airflow layout – the SGC1 is designed for maximum user-friendliness. The brawny body also guarantees that the PC case never stands on shaky legs and offers a vast amount of space for power supplies, hard drives and fans.

Outside Laid-Back, Inside Cool
For optimal airflow, a pre-installed 120 mm fan is mounted directly behind the front panel of the SGC1. Thanks to the practical oval hole cutouts, an additional 120 mm fan can easily be added. It is also possible to replace these with either two 140 mm fans or with a water cooling system. The front panel offers room for a 240 mm or a 280 mm radiator with a maximum height, including fan, of 5.9 cm. The front fan and fins convey cool air through the case. The fins themselves and a pre-installed, easy to clean dust filter protect the case interior from contamination. Another pre-installed 120 mm fan on the rear panel ensures the necessary removal of warm air. Optionally, two 120 mm fans can be mounted on the side panel. Cool air can also flow into the inside of the power supply tunnel through a second pre-installed dust filter on the case bottom. Working in conjunction with the power supply fan, further airflow is generated, resulting in the warm air from the power supply being separately dissipated. The interior of the case will not heat up and the operating noise of the power supply is reduced.

Maximum User-Friendliness
The tunnel provides enough space for power supplies up to 24 cm in length and includes an HDD cage, which can accommodate two 3.5" or two 2.5" hard drives decoupled. Oval hole cutouts allow the flexible positioning of the cage. The additional space this creates is suitable, for example, for concealing the complete cabling of power supplies which have no cable management system. Thanks to numerous cable pass-throughs, the remaining cabling inside the PC case discreetly disappears behind the mainboard tray in a just few simple steps. A cutout also simplifies the installation of CPU coolers. These can have a maximum height of 16.5 cm. The maximum length of usable graphics cards is 40 cm. If additional 2.5" hard drives are needed, two mounting frames are located behind the mainboard tray, which, thanks to the practical thumbscrews, are removed without tools.

Modular Hard Drive Mounting
The installation of optical drives is modular and easy: In the front are two drive bays for 5.25" drives. However, by using the enclosed 5.25" to 3.5" bay cover, an external 3.5" drive can be installed. If extra space is required, the drive bays can be quickly and easily removed. Directly above this, on the top of the front panel, are the microphone and headphone audio connectors as well as two USB 3.0 interfaces for convenient connection of the most important peripherals.

Compatibility

Mainboard

Mini-ITX, Micro-ATX, ATX

Max. Length Graphics Cards

40.0 cm

Max. Height CPU Cooler

16.5 cm

Max. Length Power Supply

24.0 cm

Max. Height Radiator incl. Fan (Front)

5.9 cm