The DriveLink Combo USB 3.0 V2 is a USB 3.0 enabled adapter, allowing both SATA and IDE devices to be conveniently and easily connected via a fast USB 3.0 interface to a computer or notebook. The adapter is ideal for hard drives, SSDs and optical drives in 2.5", 3.5" and 5.25" which have an external SATA or IDE interface. Since the cable adapter is connected directly with the corresponding SATA hard drives or drive, annoying cables getting in the way are not a factor. A power adapter is included with the DriveLink Combo USB 3.0 V2, providing a stable power supply to the connected devices.
To ensure that there is no accidental overwriting of important data, the DriveLink Combo USB 3.0 V2 offers a write-protection function for the SATA and IDE interfaces. This function can be activated or disabled via a selector switch. An on/off switch and LED indicators are also located on the top of the device. In addition to the power adapter mentioned above, accessories also include a 100 cm long USB 3.0 cable to connect IDE devices, and a short instruction manual for quick startup.
General
External Interface:
USB 3.0 (Type B Port)
Internal Interface SATA:
2.5", 3.5", 5.25"
Internal Interface IDE:
2.5", 3.5", 5.25" *
Chip:
IS611
Max. Data Transfer Rate USB:
5 Gbit/s
Sleep Mode:
After 30 Minutes
Optional Write Protection:
✓
On/Off Switch:
✓
Status LED:
✓
Cable:
USB 3.0 (Type A Plug to Type B Plug)
USB Cable Length:
100 cm
Power Supply:
External Power Supply
Weight:
90 g
Dimensions (L x W x H):
85.5 x 83 x 26.5 mm
Compatibility
SATA Compatibility:
Revision 1.0, 2.0, 3.0
Plug and Play:
✓
Supported Operating Systems:
Windows 7/8/10
Package Contents
DriveLink Combo USB 3.0 V2
External Power Supply
USB Cable
IDE Cable for 3.5" Devices
Manual
Note
* IDE drives must be jumpered to "Master".
EAN Code
4044951027408
Manual
DE EN
Product Info
DE EN
Manual
DE EN
Firmware
Win: sw_fw_drivelink_combo_usb3.0_18.0.6.0.11.zip
Pictures