Elegant in design, with modular installation options and fully designed for performance: that's the Sharkoon Rebel C50! With air-permeable paneling and perforated interior surfaces, this ATX case is made for airflow. Modular installation options allow space for up to two 360 mm radiators or eleven 120 mm fans, and even HDDs and SSDs can be modularly installed all together on a mounting bracket. A USB-C and a TRRS port on the top panel ensure future-proof connectivity.
Plenty of Room for Fans
The Rebel C50 comes already pre-installed with two 120 mm PWM fans: one behind the front panel and one on the rear panel. A total of eleven 120 mm fans are possible: three in the front, four on the side panel, one on the rear panel, and three more in the top of the case. A detachable dust filter on the bottom panel provides extra protection against dust and dirt.
Impressive Cooling Performance
Apart from a modular power supply tunnel, the Rebel C50 has a mounting bracket under the top of the case and another behind the mainboard tray. With these brackets, up to four fans and even a top-panel 360 mm radiator can be easily pre-mounted and then inserted into the case. In addition, there is room for another radiator alongside the mainboard tray for even more cooling performance.
Graphics Card in View
To prevent modern graphics cards from drooping, the Rebel C50 comes with a graphics card holder, complete with a rubberized contact surface. For those who prefer to mount the graphics card vertically in the case, there is the optionally available "Rebel C50 VGCK 4.0" installation set, which is equipped with a high-performance PCIe 4.0 riser cable.
Spaciously Modular
Using the mounting bracket behind the mainboard tray, also the HDDs and SSDs can be pre-mounted and placed all together inside the case. The Rebel C50 can accommodate up to three 3.5" HDDs or up to three 2.5" SSDs. Of course, the rest of the case's space is also used as efficiently as possible. Thus, there is enough room for graphics cards with a length of up to 40 cm as well as a CPU cooler with a height of up to 16.8 cm. Power supply units with a maximum length of up to 27 cm can also be accommodated.
Modern Connection Options
To be sure of the greatest possible compatibility well into the future, the Rebel C50 not only provides a modern USB-C connection, but also a TRRS connection for audio and microphone. The ports for these connections can be found on the top panel of the case. Alongside these, there are, of course, also two USB 3.0 ports for further peripheral devices.
General
Form Factor:
ATX
Expansion Slots:
7
Interior Painting:
Cable Management System:
Side Panel:
Metal
VGA Holder:
Weight & Dimensions
Weight:
7.9 kg
Dimensions (L x W x H):
46.0 x 23.0 x 49.5 cm
Max. Drive Bays
3.5":
3
2.5":
3
I/O
Type-C (USB 3.2 Gen 2):
1
USB 3.0 (Top):
2
Audio (Top):
TRRS
Drive Bays
3.5":
3
2.5":
3
Fan Configuration
Front Panel:
1x 120 mm PWM Fan (Pre-installed) + 2x 120 mm Fan (Optional) or 3x 140 mm Fan (Optional)
Side Panel:
4x 120 mm Fan* or Radiator (Optional)
Rear Panel:
1x 120 mm PWM Fan (Pre-Installed)
Top Panel:
3x 120-mm-Lüfter oder 2x 140-mm-Lüfter oder Radiator (optional)
Compatibility
Mainboard:
Mini-ITX, Micro-ATX, ATX
Max. Length Graphics Cards:
40.0 cm
Max. Height CPU Cooler:
16.8 cm
Max. Length PSU:
27.0 cm
Max. Height Radiator incl. Fan (Top):
6.0 cm
Optional Accessories
Rebel C50 VGCK 4.0
Package Contents
Rebel C50 Black
Accessory Set
Manual
Note
* 1x 120 mm fan has same installation space for 1x HDD
EAN Code
4044951038220
Data Sheet
Certifications