With its futuristic look, including the tempered-glass side and front, the AK5G RGB is the ultimate home for high-end hardware which has to be seen. The inside of this ATX case has been spaciously designed and offers room for up to eleven fans or two radiators. In addition, modern input-output connections and support for the new BTF mainboards will all ensure that the case stays future-proof.
Futuristic Look
With its eye-catching front panel and tempered-glass side panel, the AK5G RGB is ideal as an impressive showcase for impressive hardware.
Four Pre-Installed Fans
Four 120 mm RGB PWM fans are pre-installed in the AK5G RGB, and each fan has three rows of encircling LED illumination to provide striking highlights. Up to eleven fans will find room in the case.
Dual-Radiator Support
If water cooling is preferred instead of air cooling, then the AK5G RGB is exactly what you're looking for, as the case allows the simultaneous operation of up to two 360 mm radiators.
Supports BTF Mainboards
Apart from conventional mini-ITX, micro-ATX and ATX mainboards, the AK5G RGB is also compatible with almost all BTF formats on the market.
Ideal Connections
To connect a wide range of mobile and peripheral devices, the AK5G RGB has a modern TRRS and USB-C port on the front of the top panel. In addition, a controller provides the connection and operation of up to four RGB LED components and four PWM fans.
Spacious Design Inside
With an available space of up to 41 cm, even large graphics cards can be accommodated inside the AK5G RGB. In addition, CPU coolers with a height of up to 17 cm can be installed, as well as power supply units with a length of up to 23.5 cm. And there is installation space for up to two 3.5" HDDs or four 2.5" SSDs.
General
Form Factor:
ATX
Expansion Slots:
7
Interior Painting:
Tool-Free Devices Installation:
Cable Management System:
Side Panel:
Tempered Glass
VGA Holder:
Weight & Dimensions
Weight:
7 kg
Dimensions (L x W x H):
46.5 x 22.5 x 48.5 cm
RGB Compatibility
Type:
Addressable
Ports:
4
Manual Control:
22 Modes
Mainboard Compatibility:
MSI Mystic Light Sync, ASUS Aura Sync, Gigabyte RGB Fusion Ready, ASRock Polychrome Sync
RGB pinout:
5V-D-coded-G
Max. Drive Bays
3.5":
2
2.5":
4
I/O
Type-C (USB 3.2 Gen 2):
1
USB 3.0 (Top):
2
Audio (Top):
TRRS
Fan Configuration
Front Panel:
3x 120 mm Addressable RGB LED PWM Fan (Pre-Installed) or Radiator (Optional)
Side Panel:
2x 120 mm or 2x 140 mm Fan or Radiator* (Optional)
Rear Panel:
1x 120 mm Addressable RGB LED PWM Fan (Pre-installed)
Top Panel:
3x 120 mm or 2x 140 mm Fan or Radiator (Optional)
Bottom Panel:
2x 120 mm Fan (Optional)
PWM Fan Hub:
4-Port
Compatibility
Mainboard:
Mini-ITX, Micro-ATX (BTF), ATX (BTF)
Max. Length Graphics Cards:
41.0 cm
Max. Height CPU Cooler:
17.0 cm
Max. Length PSU:
23.5 cm
Max. Height Radiator incl. Fan (Front):
6.0 cm
Max. Height Radiator incl. Fan (Top):
6.0 cm
Package Contents
AK5G RGB
Accessory Set
Note
* A graphics card length of more than 26 cm may conflict with radiator installation on side panel
EAN Code
4044951041848
Data Sheet
Certifications