5.25" BayExtension

The BayExtension mounting frame allows for the simultaneous installation of up to four 2.5" HDDs or SSDs.

Alternatively, one 3.5"HDD and two 2.5" HDDs, or SSDs, can be mounted to the BayExtension simultaneously, at which the 3.5" HDD is mounted decoupled.

The BayExtension mounting frame can be mounted to standard 5.25" bays of PC cases and is attached with four fine thread screws.

The required accessories as well as a manual are included with the frame.


General:
Suitable for either up to 4x 2.5", or 1x 3.5" and 2x 2.5" HDDs and SSDs
Fits into standard 5.25" mounting bays
Decoupled mounting for 3.5" HDD
Color Versions: Black, Blue, Green, Red
Weight: 150 g
Dimensions (L x W x H): 116 x 146 x 37 mm
Package Contents:
5.25" BayExtension
Decouplers
Set of Mounting Screws
Manual

EAN Code:
Black: 4044951013319
Blue: 4044951013562
Green: 4044951013555
Red: 4044951013548

Datasheets
Manuals
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below



* required fields