Designed for performance, the Rebel P30 Gold is a power supply unit that is fully modular and certified with 80 PLUS Gold. With the new ATX 3.0 standard and a PCIe Gen5 12VHPWR connection, it offers full compatibility for high-end graphics cards. In addition, the PSU is supplied with LLC resonant-converter and DC/DC technology and is equipped only with high-quality Japanese capacitors. A quiet 135 mm fan with an intelligent Zero RPM mode provides the cooling as well as a low-noise operation.
Full Support for High-End Graphics Cards
The Rebel P30 Gold supports the new ATX 3.0 standard and is equipped with a modern PCIe Gen5 12VHPWR connection that is required for current high-end graphics cards and the highest performance.
Certified Safety and Efficiency
As its name suggests, the Rebel P30 Gold is 80 PLUS Gold certified, providing at least 90 percent efficiency at 20 percent load, 92 percent efficiency at 50 percent load, and an efficiency of 89 percent at 100 percent load. In addition, both the PSU and the user are safeguarded by all the common protective technology. This encompasses over-current protection, over- and under-voltage protection, short-circuit protection, over-temperature protection and over-power protection.
Always Cool and Quiet
A quiet 135 mm fan with a fluid dynamic bearing is used in the Rebel P30 Gold. For silent operation, the PSU's Zero RPM mode can be selected, allowing the fan rotation to be completely deactivated at moderate loads. To ensure an effective cooling for the hardware, the fan delay mode lets the fan continue to run for up to 60 seconds after the PSU has been shut down.
High Quality in Focus
For high degrees of reliability and performance, quality all-Japanese capacitors, LLC resonant converters and DC/DC technology are used in the Rebel P30 Gold. Thanks to this, the Rebel P30 Gold always delivers a constant and stable voltage with optimized noise and heat levels.
Full-Modular Assembly
All the Rebel P30's cables are modular and can be used as and when they are needed. Apart from a PCIe Gen5 12VHPWR connector, the PSU comes with a total of twelve SATA connectors and four 6+2-pin PCIe connectors. The 1,300-watt model even has up to eight 6+2-pin PCIe connectors. Two IDE connectors and a floppy connector are also available using the included adapters.
General
80 PLUS Certification:
80 PLUS Gold
Form Factor:
ATX 3.0
Continuous Power:
1,000 W
ErP Compliant:
Technology:
LLC + DC/DC
Japanese Primary Capacitors:
All Japanese Capacitors:
MTBF:
Min. 100,000 Hours
Operating Temperature:
0 °C - 50 °C
Standby Power Consumption:
< 0.5 W
Weight without Cables:
1.7 kg
Dimensions (L x W x H):
150 x 160 x 86 mm
Housing Color:
White
Input
Voltage:
100 - 240 VAC
Frequency:
50 - 60 Hz
Input Current (110/230 V):
12 A / 6 A
Output
12 V Rail(s):
1
Load 3.3 V:
24 A
Load 5 V:
24 A
Max. Combined Power 3.3 V + 5 V:
120 W
Load 12 V1:
83.3 A
Max. Combined Power 12 V:
1,000 W
Load 5 VSB:
3 A
Load −12 V:
0.5 A
Load 12VHPWR:
600 W
Cable and Connectors
Cable Configuration:
Fully Modular
Flat Cables:
Maximum Cable Length:
100 cm
Length of Mainboard Cable:
62 cm
Length of CPU Cable:
73 cm
Length of 12VHPWR Cable:
62 cm
Length of PCIe Cable:
55 cm + 15 cm
Cable Length to First Peripheral:
55 cm
20+4-Pin Mainboard Connector:
1
4+4-Pin CPU Connector:
1
8-Pin CPU Connector:
1
6+2-Pin PCIe Connector:
4
12VHPWR Connector:
1
SATA Connector:
12
IDE Connector:
2 (via Adapter)
Floppy Connector:
1 (via Adapter)
Fan
Fan Size:
135 mm
Bearing Type:
Fluid Dynamic Bearing
Protections
OCP (Over-Current Protection):
OVP (Over-Voltage Protection):
UVP (Under-Voltage Protection):
SCP (Short-Circuit Protection):
OTP (Over-Temperature Protection):
OPP (Over-Power Protection):
Safety Certifications
CE:
FCC:
UKCA:
CB:
Package Contents
Power Cord
Set of Modular Cables
Cable Bag
Mounting Screws
EAN Code
4044951038534
Data Sheet
Certifications