Silent Eagle SE

In addition to extremely low starting voltages, 6V for the 80 mm and 6.5V for the 120mm fan, the Silent Eagle SE's most unique feature is the modular cable system. Cables can be quickly and easily exchanged through the QuickConnect adapter without removing the fan. In this way, each Silent Eagle SE Fan installed in a computer can be easily made to suit the changing needs of users.

Twin-Run technology allows the fan to operate on either a PWM or Linear electrical signal-a worldwide first in fan technology. Simply connect one of the four included adapter cables (Standard, Low Noise, Silent or Ultra Silent) and control the speed of the fan via different voltages or the PWM function of the mainboard.

A newly developed Enduro bearing delivers high performance silent operation. Due to its exactly centred rotor and increased lubricant, this newly developed fan bearing has a significantly higher lifespan and better operation than normal plain bearings.

The Silent Eagle SE is available in 80 and 120 mm versions and is an all-purpose fan, suitable for use with a CPU cooler, as a case fan, or for hard drive cooling.

Both versions come with a comprehensive set of accessories, including adapter cables, anti-vibration rubber bolts and other installation material. Each fan undergoes a four step quality control process and is sent out fully tested.

General:
Fan Speed: 1,200 rpm
Bearing Type: Sleeve Bearing
Max. Airflow: 96.84 m³/h
Max. Air Pressure: 1.44 mm-H²0
Noise Level: 6.5 dB(A) - 20.5 dB(A)
Dimensions (L x W x H): 120 x 120 x 25 mm
Cable and Connectors:
Connector: 4-Pin Connector
PWM Function:
Cable Length: 30 cm
Sleeved Cable:
Electrical Specifications:
Rated Voltage: 12 V
Rated Current: 0.1 A
Rated Power: 1.2 W
Start Voltage: 6.5 V

Package Contents:
Silent Eagle SE 120 mm
Set with Rubber Bolts
Set with Fan Screws
Cable Set
Note:
Standard Cable: 4-Pin to 4-Pin PWM (Color: White)
Low-Noise Cable: 4-Pin to 4-Pin 12 V (Color: Black)
Silent Cable: 4-Pin to 4-Pin 9 V (Color: Red)
Ultra Silent Cable: 4-Pin to 4-Pin 7 V (Color: Blue)
EAN Code:
4044951008636

Datasheets
Manuals
FAQs

  • The fan does not rotate.
    If the fan is directly connected to the mainboard please check if the fan control on the mainboard is enabled, and that possibly the starting voltage for the fan is not reached.
  • Can I connected the fan to a mainboard with a 4-pin Molex connector?
    Yes, the 3-pin connector is compatible with the 4-pin connector of the mainboard. The fan then does not support digital PWM control.
  • The fan does not reach the specified rotational speed.
    If the fan is connected to the mainboard, please check that the fan control in the Bios of the mainboard is activated. Let the fan run at lease one hour before measuring the rotational speed. The fan needs a certain amount of run time before the target rotational speed is reached.
Do you have questions about our products or need help? Our experts will be happy to assist you.

> This link will take you to our support form.
Support Form
Note: Relevant product information such as user manuals, data sheets and drivers can be found under the category "Downloads".
The serial number is located directly on the product and is usually a 17-digit number. Please do not confuse it with the EAN code.

Hardware which was directly used with this product that could possibly have something to do with the failure.

Software which was used by or with this product that could possibly have something to do with the failure.

Please enter the fault description as detailed as necessary and also as brief as possible.

Upload here any photos or screenshots which could be beneficial in understanding and detailing the fault. (Allowed file formats: .jpg, .jpeg, .png, .bmp, .pdf, .doc, .docx)
Send a copy to my e-mail address
* I have read the SHARKOON GmbH Internet Terms and Conditions understand and give consent that my personal data will be saved in accordance with the privacy policy.

Please trace the figure below



* required fields